Kenmore Washer Hardware
Start With Your Model Number

Popular Kenmore Washer Hardware
$6.80

Agitator Bolt
Fix Number FIX11741866
Manufacturer Part Number WP358237
This bolt is a genuine OEM replacement part, used to secure the agitator in your washing machine. Overtime the bolt can become worn out due to the vibrations of the washer, and will need to be replaced. The size of the screw head is 7/16 inch, so you will need the appropriately sized socket to complete this repair. The new bolt comes with a rubber gasket and a threaded sealant.
Fixes these symptoms
- Leaking
- Marks left on clothes
- Spins slowly
- See more...
$7.68

Thrust Washer
Fix Number FIX11740482
Manufacturer Part Number WP233520
This washer is 3/4 inches in diameter.
Fixes these symptoms
- Burning smell
- Noisy
- Spins slowly
- See more...
$7.68

Hose Clamp
Fix Number FIX11743008
Manufacturer Part Number WP596669
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
Fixes these symptoms
- Leaking
- See more...
$7.68

Screw, 8/18 x 3/8
Fix Number FIX11746840
Manufacturer Part Number WP90767
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the manufacturer for further repair guidance.
$11.87

$7.68

$14.93

$15.90

Single Front Panel Cip
Fix Number FIX11731288
Manufacturer Part Number W10854425
This part is the replacement single front panel clip for your dryer. It is made of metal and is approximately 2 inches long and ¾ inch wide. The front panel retainer clip is what holds the front panel on to the dryer. If the clip is damaged or missing, or if the front panel appears loose, you may need to replace the clip. This part is sold individually and is an authentic OEM part.
Fixes these symptoms
- Noisy
- See more...
$7.44

Washplate Bolt
Fix Number FIX10067065
Manufacturer Part Number W10772621
Sold individually.
Fixes these symptoms
- Will not agitate
- See more...
$28.24

Bellow To Tub Clamp
Fix Number FIX11746259
Manufacturer Part Number WP8540108
This is the replacement bellow clamp for your washer. It is approximately 18 inches in diameter and is sold individually. The bellow clamp goes around the bellow in your washer and holds it in place on the washer frame. The main reason you would want to replace the bellow clamp is if it is rusted or damaged, and it is not holding the bellow in place. To remove the bellow clamp, simply use a screwdriver to pop the bellow clamp out of the groove it rests in. Place the new clamp back into the bellow groove until it snaps into place. This is an OEM part from the manufacturer.
Fixes these symptoms
- Leaking
- See more...
Related Parts
- All Kenmore Washer Parts
- Kenmore Washer Agitators
- Kenmore Washer Bearings
- Kenmore Washer Belts
- Kenmore Washer Brackets and Flanges
- Kenmore Washer Caps and Lids
- Kenmore Washer Circuit Boards and Touch Pads
- Kenmore Washer Dispensers
- Kenmore Washer Doors
- Kenmore Washer Drawers and Glides
- Kenmore Washer Drums and Tubs
- Kenmore Washer Filters
- Kenmore Washer Handles
- Kenmore Washer Hinges
- Kenmore Washer Hoses and Tubes
- Kenmore Washer Knobs
- Kenmore Washer Latches
- Kenmore Washer Legs and Foots
- Kenmore Washer Lights and Bulbs
- Kenmore Washer Motors
- Kenmore Washer Panels
- Kenmore Washer Pumps
- Kenmore Washer Seals and Gaskets
- Kenmore Washer Springs and Shock Absorbers
- Kenmore Washer Switches
- Kenmore Washer Timers
- Kenmore Washer Transmissions and Clutchs
- Kenmore Washer Valves
- Kenmore Washer Wire Plugs and Connectors