Appliance Parts

Shop by ApplianceModel Type

Popular Appliance Parts

Refrigerator Door Shelf Bin
$43.00
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX12364199
Manufacturer Part Number
242126602
This clear plastic refrigerator door shelf bin is located on the inside of the door. It is used to hold and organize items, such as jars and cans. Over time the shelf may crack, break, scratch or discolor, and will need to be replaced. This is a very easy repair and does not require any tools. Simply snap it into place in the slots on the door. This part is sold as a single part, is sourced directly from the manufacturer and is compatible with multiple types of side-by-side refrigerator models.
★★★★★
★★★★★
1 Review
Fix Number
FIX734935
Manufacturer Part Number
240534901
This is a genuine door shelf retaining bar for a refrigerator. It attaches to the inside of the door on the refrigerator and helps to secure items placed on the shelf. It is made of white plastic and can be easily installed without the use of tools. Start by making sure the projection on the inner door panel fits into the recessed area at the top of the shelf retainer bar. Once they are lined up, press it into place until you hear a snap. This part measures approximately 25-inches wide, 3-inches high, and 5-inches deep. If it breaks, cracks or warps over time, it will need to be replaced. This part is sold as an individual part. We recommend taking this opportunity to inspect the other shelf retaining bars for damage in case they also need to be replaced at the same time.
Fixes these symptoms
Refrigerator Water Filter - White
$64.97
In Stock
★★★★★
★★★★★
29 Reviews
Fix Number
FIX11704498
Manufacturer Part Number
EPTWFU01
The water filter in your refrigerator should be replaced every six months in order to provide clean, fresh tasting water. The filter absorbs impurities in the water like heavy metals, pesticides, and chlorine. Replacing the filter is easy and does not require any tools or shutting off the water supply. Simply remove the old filter by turning it counterclockwise and sliding it out. Insert the new filter and turn clockwise to lock into place. Run water through the dispenser for three to four minutes, or until 1.5 gallons have been filtered through, discarding the water as you go. This is an OEM filter for French door and side-by-side door style of fridges.
Fixes these symptoms
Refrigerator Water Filter
$64.97
In Stock
★★★★★
★★★★★
23 Reviews
Fix Number
FIX2364646
Manufacturer Part Number
ULTRAWF
This is an authentic refrigerator water filter that is sold individually. It is important to change this filter every 6 months or when your water filter indicator lights red. Not changing your filter can result in undesirable odor and taste in your drinking water and ice. The replacement of this part is straightforward, simply push on the end of the old filter to disengage it. Remove and discard the old filer. Slide the new filter into the housing and press it down until you hear a click. Run water through the dispenser to remove any bubbles or contaminants caught in the system, do this for about 3 minutes. Reset the indicator by pressing it down for several seconds.
Fixes these symptoms
  • Ice maker dispenses too little ice
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...
Refrigerator Ice and Water Filter
$103.87
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11701542
Manufacturer Part Number
EDR1RXD1
Your refrigerator water and ice filter should be replaced at least every 6 months, to prevent water that has an undesirable taste and odor, or if left for too long, can cause leaks and ice maker malfunction. The location of this filter can vary depending on your model. Some common locations to check include the top right corner of the interior compartment, the bottom left grille, or the middle of the interior. This filter is an original manufacturer part and NSF-certified. It has a straightforward, quick-turn installation feature that does not require the use of tools.
Fixes these symptoms
  • Ice maker dispenses too little ice
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...
★★★★★
★★★★★
2 Reviews
Fix Number
FIX11752778
Manufacturer Part Number
WPW10321304
This is a manufacturer-approved refrigerator door shelf bin, also sometimes referred to as the crisper bin. It is sold individually. It is made of clear plastic with a white plastic trim. It is used as a storage shelf for common refrigerator items, such as jars, bottles, cans, and condiments. When this part needs to be replaced it will be visually obvious. Over time, the plastic can sometimes crack or break due to the constant exposure to cold temperature and will need to be replaced. This is a very quick and easy repair that does not require any tools. You will simply lift up and out of place to remove, and slide the new bin onto the tabs, making sure it is level and secure before closing the refrigerator door.
Fixes these symptoms
  • Door won’t open or close
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...
★★★★★
★★★★★
5 Reviews
Fix Number
FIX429868
Manufacturer Part Number
240337901
If the middle shelf on your refrigerator door is damaged, this is the OEM replacement part needed. Door shelves are great for organizing items in your appliance such as jars, containers, and condiments, and if broken can prevent the door from properly opening and closing. This white, plastic door shelf has open square larches and measures roughly 24-1/4 inches wide and 3-3/4 inches deep. This low effort repair requires very little time and zero tools. Fasten it directly to the door by sliding it in place, and your repair is complete.
Fixes these symptoms
  • Door won’t open or close
  • Noisy
  • Touchpad does not respond
  • See more...
★★★★★
★★★★★
3 Reviews
Fix Number
FIX734936
Manufacturer Part Number
240534701
This middle shelf retainer bar attaches to the inside of the refrigerator door and helps to contain items on the shelf inside your appliance, like condiments and small containers. Its approximate size is 26 inches long, 3.5 inches tall, and made of white durable plastic. This part can start to wear or break over time, in which case it should be replaced. This is a beginner repair, that will not take any time at all. Start by removing the old part by pulling the tabs to release it. To install your new shelf, line it up with the shelf indents over the tabs, and gently press it down to lock in place. This is an OEM replacement part that is sold individually.
Fixes these symptoms
Refrigerator Water Filter
$50.38
In Stock
★★★★★
★★★★★
32 Reviews
Fix Number
FIX3412266
Manufacturer Part Number
WF3CB
To ensure fresh, unscented, unflavored drinking water and ice, you will need to relace your water filter every 6 months or when the indicator light suggests. This NSF-Certified authentic water filter reduces common pollutants found in drinking water by 99 percent. Installing a new filter is an easy job that anyone can do. Install the new filter by sliding it into the housing and pushing it into place until it locks. You will then need to re-set the indicator button by pressing it down for at least 10 seconds. This filter is sold individually.
Fixes these symptoms
  • Fridge too cold
  • Ice maker dispenses too little ice
  • Ice maker not making ice
  • See more...
Fix Number
FIX2358880
Manufacturer Part Number
241993101
If opening and closing your refrigerator is difficult, it could be due to a damaged or warped crisper cover front support. This part keeps the crisper shelf in place and mounts to the inside cabinet wall. Sold individually, this part is white in color, measures approximately 1 inch in diameter, and can be used for the front and rear support. The installation of this part is considered easy and should only take a few minutes. You will need a small flat blade screwdriver, putty knife, and soft hammer. Take the crisper and shelf out of the refrigerator first. To remove the old part, start by pushing the locking pin into the interior of the cabinet using the screwdriver, pull the support out with the putty knife. If taking out the pin is difficult, use a flat blade screwdriver to push it down and out of sight, this will not harm your refrigerator. Remove the pin and attach the new support, using a soft hammer to lock the new pin in place.
Fixes these symptoms