Small Appliance Parts

Generator Gasket - Orange This generator gasket is an OEM quality part that is used to seal the filter to the generator of your coffee maker. If this part is cracked, torn, stretched, or otherwise damaged, it should be replaced. It is made of silicone, is orange in color, has an outside diameter of 43.6mm, inside diameter of 35.2mm, and a thickness of 4.2mm (these measurements are approximate). Sold separately.

O Ring Ec270 This is a single O-ring for a coffeemaker/espresso machine. It measures approximately 5/16-inches in outer diameter and has a 3/16-inch inner diameter. This O-ring attaches to the tube, which is connected to the upper boiler. It acts as a water-tight seal to prevent liquid from leaking between these two connected parts. Due to the high temperature and wet conditions, this rubber O-ring is subject to wear and may require replacement.

O-Ring This is one black rubber O-ring for coffee makers and espresso machines. This O-ring is compatible with various products, however serves the same function. It creates a seal to keep liquids from leaking from the appliance. If your appliance begins to leak, you will want to inspect this O-ring for cracks or breakage.

Replacement Water Filter This is a charcoal water filter for a coffeemaker, which needs to be replaced every sixty days or sixty uses. This part includes two filters total. It is responsible for removing minerals and water impurities. If these impurities are not removed by the filter, it can create a buildup of calcium in the coffee maker, which can become difficult to clean and can impact the flavor of your coffee. Simply lift the coffee maker lid, and pull out the older filter. Install the new water filter into the holder and press the door closed. You will then need to run cold water over it for about 10 seconds and allow that water to drain before installing it back into your machine.

O-Ring

Electric Cord

★★★★★

★★★★★

4 Reviews

This is an OEM electric cord with a black casing that measures approximately 29-inches in length. It supplies power to various appliances. Connect it to the male post of the appliance, and the metal prongs into an electrical outlet. It may be difficult to push it into the post for the first time, but this is normal for a new cord. If the casing is cracked, wires are exposed, or sparks are present, this cord will need to be replaced. Inspect the condition of the posts before installing your new part to ensure it is in good shape and clean.

Carafe Lid Complete

★★★★★

★★★★★

2 Reviews

Activated Carbon Filter

★★★★★

★★★★★

1 Review

Spring

Gasket