BBQ Parts

Shop by BBQ Model Type

Popular BBQ Parts

Cleaning Tool
$4.13
On Order
Fix Number
FIX10295512
Manufacturer Part Number
G520-0042-W1
This stainless steel cleaning tool is an OEM part sourced directly from Char-Broil. This tool was designed to scrape off cooked on food or grease from the grates of the grills listed below. Using this tool to maintain the cleanliness of the grill will extend the life of the grates. One item is included per order.
Carry Over Tube
$6.19
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX16503242
Manufacturer Part Number
G651-0068-W1
Carryover tubes, also known as crossover tubes, connect between gas grill burners. They provide a channel for the gas and flame to be distributed from one burner to the next.
Trough Firebox Heat Shield
$38.02
In Stock
★★★★★
★★★★★
35 Reviews
Fix Number
FIX10294705
Manufacturer Part Number
G352-2100-W1
This is a genuine manufacturer approved replacement part for use in Char-Broil RED Infrared Urban and Gourmet Grills. To ensure this part is compatible with your Grill, please see the "Model Cross Reference List" below. The Trough attaches to the frame and creates a heat barrier between the propane tank and the firebox. It has approximate dimensions of 18"W x 17"L x 3"H and is made of durable metal. If your Trough is broken, cracked, or missing, it needs to be replaced. Each is sold individually, and may also be called a Heat Sheild.
Trough
$50.23
On Order
★★★★★
★★★★★
5 Reviews
Fix Number
FIX10295618
Manufacturer Part Number
G521-3500-W1
This grease tray is for gas grills. The grease tray collects the grease dripping from food during grilling.
Surefire Gas Grill Ignition Sw
$11.59
In Stock
★★★★★
★★★★★
7 Reviews
Fix Number
FIX12011759
Manufacturer Part Number
G515-0017-W7
This Ignition Switch Module is a genuine OEM approved Char-Broil replacement part. To ensure this is compatible with your Grill, please see the "Model Cross Reference List" below. This Ignitor Switch Module is what creates the spark inside your Grill to ignite it. Over time, components may wear out and begin to fail eventually requiring a replacement. If your Grill will turn on but will not ignite, you may need to replace the Ignitor Switch Module. This kit includes the Ignitor and the complete Wire Harness for all burners. Each kit is sold individually.
Main Burner-tube Burner
$14.16
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX16502990
Manufacturer Part Number
G470-5200-W1
This burner tube helps to cook your food on your gas grill by allowing gas to flow through the small holes or ports along its length, where it mixes with air and ignites to produce a flame. It is 17-3/4 inches long and has an outer diameter of 5/8 inches. It features a vented venturi end, a 90-degree bend, and a center slotted mounting hole at the back end. The burner tube is typically found underneath the heat tents, running parallel to it. If you notice signs like uneven flames, weak heat output, frequent clogs, or visible damage such as rust or corrosion, the burner tube needs to be replaced. To do so, you will need pliers and a screwdriver. Use these tools to remove the cooking grates, heat tents, and the holding pins and brackets that secure the tube to the grill box. Keep in mind that this OEM replacement part is sold individually, so verify the quantity needed for your appliance before making your purchase.
Heat Tent
$11.59
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX17016583
Manufacturer Part Number
80029725
This is an authentic OEM replacement part that has been sourced directly from the Char-Broil, it is compatible with various Char-Broil Grills. For full compatibility, please see the "Model Cross Reference List" below. The Heat Tent prevents flare-ups, helps to distribute the heat of the flame evenly across the grill, and is responsible for providing that smoky BBQ flavor by creating smoke when drippings fall on them. Over time, the Heat Tent will tend to wear or rust and should be replaced if signs of either begin to show. The dimensions of the Heat Tent are approximately: 14.6"L x 4.3"W x 1.43" H, is made of porcelain, and may also be referred to as a Heat Plate, Flame Tamer, or a Heat Sheild. Heat Tents are sold individually.
Grate Housing Tray
$26.68
In Stock
★★★★★
★★★★★
8 Reviews
Fix Number
FIX10291063
Manufacturer Part Number
3488898
Genuine Char-Broil replacement part, this item is sold individually. The Lower Grate Housing is placed underneath the 3486613 Cooking Grates. It helps distribute the heat evenly on the Grill. Over time it will collect food particles and grease from the Cooking Grates. It can be removed and cleaned with soap and water. Size: 18.4" L X 8.7" W
Stainless Steel Infrared Emitter
$23.87
On Order
★★★★★
★★★★★
2 Reviews
Fix Number
FIX10294069
Manufacturer Part Number
80021356
This Emitter is sourced directly from Char-Broil and is an authentic OEM replacement part for Char-Broil grills. For full compatibility, please see the "Model Cross Reference List" below. The emitter is responsible for radiating and transmitting heat to fuel without exposure to flame. If the part is rusty or damaged, it needs to be replaced. The Emitter is approximately 18.35"L, 8.89"W, and 5/8" thick. This Emitter is only designed to be paired with a cast iron cooking grate (Part #80021355). Emitters are sold individually.
Trough
$41.22
In Stock
★★★★★
★★★★★
5 Reviews
Fix Number
FIX10295368
Manufacturer Part Number
G517-6600-W1
This is a Genuine Manufacturer Approved replacement part for use in Char-Broil Grills. This Trough helps to transfer heat to the food. Trough has extended supports on the front and back sides. This part is made out of Metal and it is Sold Individually. No special tools are required to attach this Trough