Official Kenmore Washer Transmissions and Clutches

Drive Hub Kit

$33.90

Fix Number: FIX6012095
Manufacturer Part Number: W10528947

The drive hub connects the basket of your washer to the transmission shaft, which in turn allows the basket to spin. If your washer will not agitate, spins slowly, or is excessively noisy, it may require a new drive hub assembly. This genuine OEM kit comes with a new hub and a fork holder. To replace this part, you will need to remove the agitator from the tub to expose the hub assembly. Use a flat blade screwdriver to remove the fork shaped holder, and then remove the screws holding the hub assembly to the transmission shaft. Place the new hub onto the shaft, and rotate the washer tub to line up the holes. Once lined up, drill the screws back into place. Please note that this kit does not come with replacement screws, so you will need to reuse the ones from the old hub. The new fork holder is then put through the slotted opening, using a small hammer to tap it into place. Once you have installed the new part, be sure to follow the instructions on the pamphlet provided with the hub to calibrate your washer.

Fixes these symptoms

Shaking and Moving
Spinning Issues
Spins slowly
See more...

Watch the install video

Washer Drive Pulley

$54.33

★★★★★

2 Reviews

Fix Number: FIX10057144
Manufacturer Part Number: W10721967

The washer drive pulley kit is also known as a replacement clutch assembly, or a cam kit. The drive pulley is found at the bottom of your washing machine, mounted to the drive shaft. Common symptoms indicating an issue with the part include the washer having difficulty with the wash and spin cycles, or is making a lot of noise. It is likely that the splines on the assembly have become stripped, and the assembly will need to be replaced. To do this repair you will need to disconnect the power and water supply to your washer, and place the washer on its back to access the drive shaft. This kit contains 6 different certified OEM parts that make up the clutch assembly, which includes the pulley, 13 mm nut, cover, gear, cam, and spring.

Fixes these symptoms

Burning smell
Noisy and Marks Left on Clothes
Spinning Issues
See more...

Watch the install video

Clutch Assembly

$27.55

★★★★★

1 Review

Fix Number: FIX334641
Manufacturer Part Number: 285785

This is a genuine OEM replacement clutch assembly for your washing machine. A clutch assembly, also known as a clutch or a washer clutch, is responsible for spinning the tub during the spin cycle. If the clutch becomes worn and is no longer operating properly, your clothes will remain soaked after the cycle is finished. Some other signs it is time to replace the clutch is if your washer is noisy while running, there is a burning smell, or the machine is shaking excessively. This kit comes with the clutch, brake cam driver, spring, retaining ring, and a nylon anti-rattle clip. Before beginning this repair, be sure to disconnect the power and water supply to your machine. Depending on your washer model, you may need an additional person to help lower the machine onto its back, as access to the drive shaft to change the clutch assembly may be easiest through the bottom of the appliance.

Fixes these symptoms

Burning smell
Spinning Issues
Spins slowly
See more...

Watch the install video

Shift Actuator - 6 Pin

$66.20

★★★★★

1 Review

Fix Number: FIX11769864
Manufacturer Part Number: W10913953

Fixes these symptoms

Cycle Not Advancing
Spinning Issues
Spins slowly
See more...

Watch the install video

Shift Actuator - 120V 60Hz

$73.33

★★★★★

1 Review

Fix Number: FIX11747977
Manufacturer Part Number: WPW10006355

This part changes the transmission from agitation to spin mode. This actuator is for washers. Actuator shifts the splutch and monitors the position of the splutch.

Fixes these symptoms

Spinning Issues
Spins slowly
Will not agitate
See more...

Watch the install video

Basket Hub Kit

$37.69

★★★★★

1 Review

Fix Number: FIX11723155
Manufacturer Part Number: W10820039

The purpose of this part is to help drive the outer spin basket in your washer during the spin cycle. If your washer is not spinning or agitating, you may need to replace the drive hubs. This genuine OEM kit includes a gear assembly, which sits on the transmission shaft, and a drive hub that attaches to the inner basket. There are two different styles of hub included, but only one is needed. The style you use depends on your washer. The basket hub is found under the agitator, so it will need to be removed from the washer in order to complete this repair. Before beginning, please be sure to disconnect the power supply to the washer.

Fixes these symptoms

Leaking
Spinning Issues
Spins slowly
See more...

CLUTCH

$105.91

Fix Number: FIX10064562
Manufacturer Part Number: W10754448

Fixes these symptoms

Will not agitate
See more...

Watch the install video

Gearcase

$379.33

Fix Number: FIX341974
Manufacturer Part Number: 3360629

This is used in your direct drive washer that has a neutral drain.

Fixes these symptoms

Leaking
Will not agitate
See more...

Speed Governor

$19.87

Fix Number: FIX11753017
Manufacturer Part Number: WPW10330804

Also known as a clutch.

Watch the install video

Basket Drive Assembly with Clutch

$155.14

Fix Number: FIX11723156
Manufacturer Part Number: W10820043

This basket drive assembly is for washers. Basket drive assembly sits on top of the transmission shaft and houses the spin basket brake mechanism. The basket drive spins to rotate the basket during the spin cycle.

Fixes these symptoms

Spins slowly
See more...

Kenmore Washer Transmissions and Clutches

Popular Kenmore Washer Transmissions and Clutches

Related Kenmore Washer Parts

Kenmore Washer Transmissions and Clutches

Start With Your Model Number

Popular Kenmore Washer Transmissions and Clutches

Related Kenmore Washer Parts