Official Kenmore Washer Latches

Watch the install video

$14.10

Door Strike

★★★★★

1 Review

Fix Number FIX890617

Manufacturer Part Number 131763310

Located on the door of front load washing machines, the Door Strike ensures that the door will lock by activating the switch, which in turn allows the appliance to run properly. If your washer door will not open or close, is leaking, or the machine will not start or spin, your door strike may be damaged and should be replaced. Regular wear and tear, or a misaligned door may cause the piece to break. This is an easy repair and requires a Phillips screwdriver. This genuine OEM part is made of white plastic, approximately 2 inches in length, and is held in place by 2 screws on the inside of the door. Simply unscrew and remove the old part, line up the placement of the new part using the notch, and tighten the screws back into place.

Fixes these symptoms

Door latch failure
Door won’t close
Leaking
See more...

Watch the install video

$20.16

Door Striker

Fix Number FIX2378364

Manufacturer Part Number 131763302

The door striker is a part found on the door of your washer, and it activates the door switch which signals that the door is closed. This genuine OEM replacement part is also known as a door latch or hook, and it is gray in color and made of plastic. You may need to replace the door striker if your washer will not start, or if the door will not open or close. To complete this repair, you will just need a No. 2 square head screwdriver. Open the washer door and remove the screws holding the old striker in place and attach the new one in its place.

Fixes these symptoms

Door won’t close
Lid or door won’t close
Will Not Start
See more...

$25.09

Magnetic Door Plunger

★★★★★

3 Reviews

Fix Number FIX3618292

Manufacturer Part Number AGM73610701

The magnetic door plunger is used on your washing machine to keep the door open when not in use. This allows for the inner door and tub seal to dry thoroughly, which helps to prevent any buildup of mold or mildew. If your washer door is not closing properly, the magnetic door plunger may be damaged and needs to be replaced. This genuine OEM part includes the plastic housing and a spring. To install the part, you just need to line up the tabs on the plunger with the slots on the inner door panel and snap it into place.

Fixes these symptoms

Leaking
Lid or door won’t close
See more...

Watch the install video

$45.88

Lid Latch Assembly

★★★★★

3 Reviews

Fix Number FIX3497627

Manufacturer Part Number W10404050

The lid latch is a safety feature found in your washer. Its purpose is to stop the machine from spinning when the lid is opened. You may need to replace the lid latch assembly if your washer will not start, the lid will not close, or the lid will not open. This is a genuine OEM part, and to do this repair you will need a 1/4-inch nut driver and small flat blade screwdriver. You will also need to disconnect the power and water supply from your washer before beginning.

Fixes these symptoms

Lid or door won’t close
Locking Issues
Spins slowly
See more...

Watch the install video

$12.18

Door Strike/Hook

Fix Number FIX11746261

Manufacturer Part Number WP8540221

Used to help make the door stay closed. Sold individually.

Fixes these symptoms

Door won’t close
Leaking
Lid or door won’t close
See more...

Watch the install video

$65.23

Door Lock Assembly

Fix Number FIX3533609

Manufacturer Part Number EBF49827801

The door lock assembly is a genuine OEM part for your washing machine. This part informs the washer that the door is closed and locked in place, which allows the machine to start its cycle. If you are not able to open or close the door, or the washer will not start, the door lock assembly may need to be replaced. This can happen if the switch has shorted out, which will prevent the latch from locking. Before beginning this repair, please be sure to disconnect the power supply to your washer. You will need a Phillips screwdriver in order to replace this part.

Fixes these symptoms

Lid or door won’t close
Will Not Start
See more...

$143.75

Lid Lock Assembly

★★★★★

1 Review

Fix Number FIX11722981

Manufacturer Part Number W10810403

Fixes these symptoms

Lid or door won’t close
Will Not Start
See more...

$20.63

STRIKE

Fix Number FIX11726338

Manufacturer Part Number W10837741

Fixes these symptoms

Lid or door won’t close
Will Not Start
See more...

Watch the install video

$44.52

Lid Latch Strike

Fix Number FIX11750882

Manufacturer Part Number WPW10240513

This part is the replacement lid latch or latch assembly for your top-load washer. The lid latch holds your washer door closed, and allows the washer to run its cycle. If the lid latch is damaged, your washer door may not close properly and you may not be able to run your washer. The latch is found under the lid and can be screwed out and replaced. You will need a Phillips-head screwdriver for this repair. This part is sold individually and is and OEM part from the manufacturer.

Fixes these symptoms

Lid or door won’t close
Will Not Start
See more...

Watch the install video

$94.96

Lid Lock Assembly

★★★★★

1 Review

Fix Number FIX11756782

Manufacturer Part Number WPW10619844

This part makes sure that the lid is shut before allowing the machine to start or agitate. NOTE: This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including

Fixes these symptoms

Lid or door won’t close
Will Not Start
See more...

Kenmore Washer Latches

Popular Kenmore Washer Latches

Related Parts

Kenmore Washer Latches

Start With Your Model Number

Popular Kenmore Washer Latches

Related Parts