Kenmore Washer Pumps

Start With Your Model Number

Need help finding your model number?
Find Parts Fast
Guaranteed Fit
Repair Videos
Fix.com search
Kenmore Appliance Parts
Shop By Part Type

Popular Kenmore Washer Pumps

Watch the install video
Washing Machine Drain Pump – Part Number: 4681EA2001T
Washing Machine Drain Pump
$57.07
In Stock
★★★★★
★★★★★
4 Reviews
Fix Number
FIX3579318
Manufacturer Part Number
4681EA2001T
This is a drain pump motor assembly for washers. This OEM part is responsible for removing water from the washer during the drain part of the cycle. When this part is clogged, damaged or defective it can cause the washer to not drain properly. Keep in mind that the pump casing is sold separately. This repair is rated medium-difficulty and can vary depending on the model. For this repair you will need a Philips screwdriver, a small flat blade screwdriver, needle nose pliers, and slip joint pliers. Do not forget to disconnect the power before you begin this repair. In general, this repair can be started by removing the top of the washer followed by the front panel. Moving down the front of the appliance, remove the door, latch, tub gasket, and drainer cover. The drain hoses and clip will need to be disconnected from under the drain assembly. To install the new pump motor, reassemble parts in the reverse order. We recommend taking photos while disassembling and keeping screws and parts neatly organized.
Fixes these symptoms
  • Draining Issues
  • Engine runs but does not pump water
  • Leaking
  • See more...
Watch the install video
Washer Direct Drive Water Pump – Part Number: WP3363394
Washer Direct Drive Water Pump
$42.18
In Stock
Fix Number
FIX11741239
Manufacturer Part Number
WP3363394
The direct drive water pump is used in washing machines that do not have belts, to remove water from the tub during the drain cycle. It is located on the motor and attached by two clips. The drain pump has two ports for water to pass through, one port is larger than the other, and this is where the hoses connect. If your washer leaks, will drain the water, or is filling and draining at the same time, there may be an issue with your pump. Blockages or clogs in the hoses may be contributing to this. Before you replace the pump, be sure to disconnect the power and water lines to your appliance. This repair requires a pair of slip-joint pliers, a flat head screwdriver, and a putty knife. You may find it useful to have a container on hand to collect any water left in the hoses, and to have another person to assist with lifting and lowering the machine. This is a genuine OEM part made of durable white plastic. Other names you may know it by include direct drive washer pump, drain pump, washer drain pump, or water pump.
Fixes these symptoms
Watch the install video
Washer Drain Pump – Part Number: WPW10730972
Washer Drain Pump
$107.95
In Stock
★★★★★
★★★★★
3 Reviews
Fix Number
FIX11757304
Manufacturer Part Number
WPW10730972
There are a number of symptoms that indicate there may be an issue with your washer drain pump. These include signs of leaking, excessive noise, if your washing machine will not drain, or if it pumps but will not spin. If you are experiencing any of these, a replacement drain pump may be necessary. This is a genuine OEM part, so it is guaranteed to work with your washer. Be sure to disconnect the power supply to your washer before beginning this repair. We find it easiest to access the panel if the front of the washer is elevated, a couple of wood blocks under the feet will help achieve this. Before removing the old pump, have a container handy to drain any water remaining in the pump or hoses.
Fixes these symptoms
  • Burning smell
  • Draining Issues
  • Engine runs but does not pump water
  • See more...
Watch the install video
Drain Pump Kit – Part Number: 280187
Drain Pump Kit
$137.90
In Stock
Fix Number
FIX1485610
Manufacturer Part Number
280187
This washer drain pump fits select front-load models from Whirlpool, Maytag, and Kenmore. It helps remove water during the wash cycle and prevents leaks. Replacing a faulty pump can fix issues like slow draining, error codes, or unusual noises. Be sure to verify compatibility with your washer model before ordering.
Fixes these symptoms
Washer Drain Pump Assembly – Part Number: 5859EA1004P
Washer Drain Pump Assembly
$180.95
In Stock
Fix Number
FIX11706439
Manufacturer Part Number
5859EA1004P
This drain pump helps your LG or Kenmore washer get rid of water after each cycle. If your washer isn’t draining, leaves water in the tub, or makes strange noises, replacing the pump could fix it. It’s a reliable part with a strong motor and fits many models. Just unplug your washer before installing.
Fixes these symptoms
Watch the install video
Water-Pump – Part Number: W10876600
Water-Pump
$101.18
In Stock
Fix Number
FIX11738156
Manufacturer Part Number
W10876600
Designed specifically for top-load washing machines, this drain pump ensures efficient water removal during the drain cycle by directing it from the washer tub into your home's plumbing system via the drain hose. A malfunctioning pump may lead to symptoms such as extended drain times, unusual noises like grinding or rattling, or residual water left in the tub after a cycle. These issues can stem from wear and tear, electrical faults, physical damage, or blockages caused by small objects like coins or buttons. Replacing a faulty drain pump can help restore your washer’s performance and prevent further complications.
Fixes these symptoms
Watch the install video
Drain Pump - 120V 60 Hz. – Part Number: 137221600
Drain Pump - 120V 60 Hz.
$151.41
In Stock
Fix Number
FIX7783938
Manufacturer Part Number
137221600
The pump is what your washer uses to remove the water from the tub. This part is the pump and motor assembly which includes the red flapper to prevent drain back flow.
Fixes these symptoms
Drain Pump Assembly – Part Number: W11396717
Drain Pump Assembly
$130.00
In Stock
Fix Number
FIX12731177
Manufacturer Part Number
W11396717
If your washer isn’t draining properly, this replacement pump could be the solution. It helps remove water during the drain cycle so your clothes come out clean and your machine runs smoothly. It’s a genuine part made to fit a range of models, but be sure to check your washer’s diagram to see what’s included. Before installing, unplug the machine and turn off the water—safety first!
Fixes these symptoms
Watch the install video
Drain Pump - 120V 60Hz – Part Number: WPW10276397
Drain Pump - 120V 60Hz
$91.52
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11751719
Manufacturer Part Number
WPW10276397
This drain pump helps remove water from the washer during the drain cycle. It’s a durable replacement for top-load models from Whirlpool and related brands. If your washer won’t drain, leaks, or makes loud noises, this part may need replacing. Be sure to check compatibility with your model and disconnect power before installation.
Fixes these symptoms
Drain Pump Assembly – Part Number: W11399437
Drain Pump Assembly
$139.11
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX12731241
Manufacturer Part Number
W11399437
If your dishwasher isn’t draining properly, this genuine drain pump assembly could be the fix. It helps clear water from the tub during the cycle so your dishes come out clean and dry. Made for Whirlpool and related brands, it’s built to last and easy to install. Just make sure to unplug the dishwasher and turn off the water before you start. Check your parts diagram to see everything that comes with the kit.
Fixes these symptoms

Related Kenmore Washer Parts