Kenmore Washer Hoses and Tubes

Kenmore Appliance Parts

Popular Kenmore Washer Hoses and Tubes

★★★★★
★★★★★
1 Review
Fix Number
FIX3523347
Manufacturer Part Number
4738ER1004B
This washer hose with bellows, also known as a dispenser hose, is a genuine OEM replacement part for your washer. Replacing this part can be helpful if your washer is leaking. The dispenser hose connects the dispenser assembly to the tub. Before beginning the repair, unplug the washer and turn off the water supply. You will need a Phillips head screwdriver to complete this repair; a clamp tool can also be helpful. Remove the screws holding the lid of the washer in place, and take off the lid. Locate the dispenser hose and remove its clamps. Place the clamps on the new hose, using the arrows for a guide in positioning the clamps. Install the new hose and reassemble all other parts.
Fixes these symptoms
Washer Drain Hose
$26.20
In Stock
Fix Number
FIX12578897
Manufacturer Part Number
W11244231
The drain hose carries used water from the washer to your house drain.
Fixes these symptoms
Drain Hose Assembly
$36.00
In Stock
Fix Number
FIX3527325
Manufacturer Part Number
5215ER2002G
Fixes these symptoms
Tub-to-Pump Hose
$41.15
In Stock
Fix Number
FIX3617213
Manufacturer Part Number
AEM73213001
Fixes these symptoms
★★★★★
★★★★★
1 Review
Fix Number
FIX3523345
Manufacturer Part Number
4738ER1002A
This hose has bellows to allow for flexibility during the wash and spin cycles.
Fixes these symptoms
Washer drain Hose Assembly
$46.30
In Stock
Fix Number
FIX8749199
Manufacturer Part Number
AEM73732901
Fixes these symptoms
Tub to Pump Hose
$76.52
In Stock
Fix Number
FIX3418888
Manufacturer Part Number
134639920
This washer tub-to-pump hose, often called a coin trap or bellows hose, carries water from the outer tub to the drain pump during drain and spin cycles. Designed with an integrated trap, it captures coins, buttons, and other small debris to prevent damage to the pump. Made from durable black rubber or flexible plastic, it withstands high water pressure and constant vibration. Common signs of failure include leaks from underneath the washer, unusual noises, or drainage issues such as slow draining or error codes.
Fixes these symptoms
Fix Number
FIX11765836
Manufacturer Part Number
W10899966
The tub-to-pump hose carries the water from the tub to the drain pump. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands
Fixes these symptoms
Circularion Hose Pipe
$47.33
In Stock
Fix Number
FIX16221736
Manufacturer Part Number
5304526694
HOSE
$32.91
In Stock
Fix Number
FIX12723931
Manufacturer Part Number
W11366249
This is a replacement tub-to-pump hose for your washer. This hose runs from the bottom of the tub to the water pump, and is used to transport water. The hose can develop a hole, and when this happens you will notice water leaking onto the floor. The tub-to-pump hose is found below the washer tub. To disconnect the hose, you will need to release the clamps that hold it in place with a pair of pliers. When you replace the tub hose, you will need to transfer the ball, air chamber, and clamps from the old pump to the new one. To do this, you will need a set of wire cutters and a new zip tie to replace the one you will need to cut.
Fixes these symptoms

Related Kenmore Washer Parts