LG/LG_Thumb/138536-1.gif
See part K520 in the diagram
( Grid squares measure 1x1 inch )

Tub-to-Pump Drain Hose

★★★★★
★★★★★
1 Review
$ 32.36   In Stock
Fix Number: FIX3523345
Manufacturer #: 4738ER1002A
Manufactured by: LG

Product Description

This hose has bellows to allow for flexibility during the wash and spin cycles.

Videos For installing this part.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.9 / 5.0, 4 reviews.
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    • Customer:
      Derrick from Hammonton, NJ
    • Parts Used:
      4738ER1002A
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      1- 2 hours
    • Tools:
      Pliers, Screw drivers
    Drain hose had 2 slits in the bellows.
    Used a Phillips head screw driver remove the band clamp from the main tub drain(easy). Then used a pair of pliers to release spring clamps(1 @ the pump and 1 @ the over flow drain). Removing the Hose was easy, replacing was a bit difficult only because connecting the hose to the pump took a lot of time getting the spring clamp in the right position and making sure I didn't cut the hose, surly the hardest part of the operation. Secured band clamp and spring clamp. Op's normal.
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Candyce from Minneapolis, MN
    • Parts Used:
      4738ER1002A
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      1- 2 hours
    • Tools:
      Screw drivers, Wrench set
    Bellows leaked
    Removed original bellows and replaced with new part. The replacement was very straightforward, but it took a little over an hour due to the inaccessibility of the area and difficulty of getting the clamps on the ends of the tubing and slipping those ends over the appropriate connection points. It's necessary to reach into the rear of the washer, almost to the front, in order to put the front of the bellows part on the connection. There isn't a lot of room to work, though the washer was pulled far enough from the wall to have room to move around.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Howard from Orem, UT
    • Parts Used:
      4738ER1002A
    • Difficulty Level:
      Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    Small hole in the bellows which caused a leak.
    I tipped the washer back so it would stay without falling. The new part is installed on the bottom of the machine. I used a large pair of slip joint pliers to expand and slide off the hose clamps from the front and back of the bellows assembly. A Phillips screwdriver undid the center clamp in the middle of the bellows assembly. Have a towel under the area to absorb the 1/2 pint or so of the water that will come out. When installing the new part, first slide the clamps on each end and set the big wire clamp in the center. Install the front end of the part first and put the clamp in its place with the pliers. Then secure the large part to the center area and tighten that clamp with the screwdriver. Finally attach the back end of the part to its location and place the clamp where it goes. Carefully set the washer on its feet, plug it in, start it up and check for leaks. You're done.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Randy from Arroyo Grande, CA
    • Parts Used:
      4738ER1002A
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Pliers
    bellows tear from tub movement
    The tub to pump hose is very easy to get to if you remove the following. 1: remove the 4 Phillips screws holding the two plastic clips at the top rear of the machine. 2: push the top metal panel to the rear and remove. 3: remove two screws on either side of the soap dispenser and un- clip the plastic tabs which attach the control panel and move to expose four 10mm hex head screws.4: remove the door gasket clamp spring wire and save for reinstallation. 5: Remove the lint screen door and two Phillips head screws. Drain the pump via the drain hose into a quart container. 6: remove the plastic pump cover to expose one Phillips head screw and remove. 7: remove the four 10mm screws under the control panel. 8: grasp the front cover tilt the front panel towards you and lift up and remove. You can now access the tub to pump bellows.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating: (1 Review)
      5.0
      ★★★★★
      ★★★★★
      Filter By Rating:
      • 5
        1
      • 4
        0
      • 3
        0
      • 2
        0
      • 1
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Compatibility
          This part works with the following models:
          Fix Number: FIX3523345
          Manufacturer Part Number: 4738ER1002A
          Brand
          Model Number
          Description
          LG
          40272
          Washer - LG Washing Machine Model 40272 Parts
          LG
          40318
          Washer - LG Washing Machine Model 40318 Parts
          LG
          40441
          Washer - LG Washing Machine Model 40441 Parts
          LG
          40448
          Washer - LG Washing Machine Model 40448 Parts
          LG
          40512
          Washer - LG Washing Machine Model 40512 Parts
          LG
          40518
          Washer - LG Washing Machine Model 40518 Parts
          LG
          41002
          Washer - LG Washing Machine Model 41002 Parts
          LG
          41003
          Washer - LG Washing Machine Model 41003 Parts
          LG
          41022
          Washer - LG Washing Machine Model 41022 Parts
          LG
          41028
          Washer - LG Washing Machine Model 41028 Parts
          LG
          41029
          Washer - LG Washing Machine Model 41029 Parts
          LG
          41072
          Washer - LG Washing Machine Model 41072 Parts
          LG
          41073
          Washer - LG Washing Machine Model 41073 Parts
          LG
          41162
          Washer - LG Washing Machine Model 41162 Parts
          LG
          41172
          Washer - LG Washing Machine Model 41172 Parts
          LG
          41182
          Washer - LG Washing Machine Model 41182 Parts
          LG
          41262
          Washer - LG Washing Machine Model 41262 Parts
          LG
          41272
          Washer - LG Washing Machine Model 41272 Parts
          LG
          41282
          Washer - LG Washing Machine Model 41282 Parts
          LG
          41283
          Washer - LG Washing Machine Model 41283 Parts
          LG
          41302
          Washer - LG Washing Machine Model 41302 Parts
          LG
          41303
          Washer - LG Washing Machine Model 41303 Parts
          LG
          41372
          Washer - LG Washing Machine Model 41372 Parts
          LG
          41373
          Washer - LG Washing Machine Model 41373 Parts
          LG
          41379
          Washer - LG Washing Machine Model 41379 Parts
          LG
          41382
          Washer - LG Washing Machine Model 41382 Parts
          LG
          41383
          Washer - LG Washing Machine Model 41383 Parts
          LG
          41392
          Washer - LG Washing Machine Model 41392 Parts
          LG
          41393
          Washer - LG Washing Machine Model 41393 Parts
          LG
          41472
          Washer - LG Washing Machine Model 41472 Parts