Kenmore Washer Seals and Gaskets

Kenmore Appliance Parts

Popular Kenmore Washer Seals and Gaskets

Door Boot Seal
$100.12
In Stock
Fix Number
FIX3535210
Manufacturer Part Number
MDS47123602
This flexible gasket seals the door on your LG or Kenmore front-load washer to keep water from leaking during cycles. If you’re seeing puddles, smelling mildew, or noticing moisture around the door, replacing the gasket can help. It’s made from durable material and fits many models—just check your washer’s model number to be sure.
Fixes these symptoms
GASKET
$146.72
On Order
Fix Number
FIX12590532
Manufacturer Part Number
MDS66290801
This rubber gasket seals the door on your LG front-load washer to keep water from leaking out during cycles. If you’re noticing puddles, mildew smells, or moisture around the door, replacing the gasket can help. It’s made to last and also helps reduce vibration while your washer runs. Fits many LG models.
Fixes these symptoms
Bellow
$164.01
In Stock
Fix Number
FIX2342392
Manufacturer Part Number
134616100
If your front-load washer is leaking or making strange noises, the door boot seal might be the culprit. This soft rubber ring fits around the door and keeps water inside while your machine runs. It also helps reduce noise and lets the drum spin freely. Over time, it can crack or tear, or even collect mold, which leads to bad smells. Replacing it can fix leaks and improve your washer’s performance. It’s usually gray and fits snugly between the door and the drum. Installing it takes a bit of effort—you’ll need to remove the front panel and secure it with clamps—but it’s a common fix for water leaks and sealing issues.
Fixes these symptoms
Washer Door Boot Seal
$62.81
In Stock
Fix Number
FIX3524977
Manufacturer Part Number
4986ER0004F
This is an original manufacturer door gasket with a drain hole, for a front-load washer. If you require a door gasket without a drain hole, that is sold separately. Door gaskets are also commonly referred to as a door boot seal or bellow. The door gasket forms a seal between the door and tub, and the drain port allows for water drainage. A few symptoms related to this part include leaking, unusual sounds, poor performance, a burning smell, and a door that will not shut or seal properly. Be sure to keep your washer door gasket clean, and never overload your washer.
Fixes these symptoms
  • Burning smell
  • Leaking
  • Marks left on clothes
  • See more...
Centerpost Gasket
$7.93
In Stock
Fix Number
FIX11723081
Manufacturer Part Number
W10814296
Stop leaks before they start with this outer tub seal. It fits between the tub and base to keep water inside where it belongs. At about 2 inches across, this sturdy black gasket is built to last. Installing it takes some work—you’ll need to unplug the washer, disconnect hoses, and remove the tub—but replacing a worn seal now means fewer leaks and better performance later.
Fixes these symptoms
Washer Door Bellow
$119.61
In Stock
Fix Number
FIX11744957
Manufacturer Part Number
WP8182119
This door boot seal serves as the primary gasket between the front bulkhead and the outer tub of your washing machine, ensuring a watertight barrier during operation. It prevents water leakage and supports proper drum function by maintaining a secure seal. Over time, the seal may wear, tear, or become misshapen, leading to leaks or performance issues. This replacement part is sold without clamps, which must be ordered separately if needed. For best results, verify compatibility with your appliance model before installation.
Fixes these symptoms
★★★★★
★★★★★
1 Review
Fix Number
FIX11748353
Manufacturer Part Number
WPW10111435
Also known as a door boot seal.This part is used to keep the clothes inside the tub during the wash cycle. The folds in the bellow allow the tub to move separately from the door during the spin cycle.
Fixes these symptoms
Door Boot Seal
$109.88
In Stock
Fix Number
FIX6448330
Manufacturer Part Number
MDS47123608
This door boot seal helps create a tight, leak-proof connection between the drum and door of front-load washing machines, ensuring water stays contained during each cycle. Over time, the seal can wear down, tear, or develop mold due to constant moisture exposure and limited airflow. If you’re noticing water leaking from the front of your washer, unpleasant odors, or visible mold on the gasket, it’s likely time for a replacement. Installing a new seal involves some disassembly of the washer and requires basic tools like a screwdriver, pliers, and a wrench. This replacement part is sold individually and does not include clamps or additional hardware.
Fixes these symptoms
Rear Tub Gasket
$23.00
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX3522855
Manufacturer Part Number
4036ER2004A
Fixes these symptoms
  • Burning smell
  • Leaking
  • Noisy and Marks Left on Clothes
  • See more...
Fix Number
FIX11748108
Manufacturer Part Number
WPW10072840
Also known as an O-Ring. This black o-ring seal is three inches in diameter.
Fixes these symptoms
  • Does not dispense fabric softener or detergent
  • Leaking
  • Marks left on clothes
  • See more...

Related Kenmore Washer Parts