Maytag/Maytag_Thumb/TCQNS8DN.gif
See part 1 in the diagram
Replacing your Kenmore Washer Front Load Washer Bellow - Gray play video
( Grid squares measure 1x1 inch )

Front Load Washer Bellow - Gray

★★★★★
★★★★★
1 Review
$131.80
Fix Number: FIX11748353
Manufacturer #: WPW10111435
Manufactured by: Whirlpool

Product Description

Also known as a door boot seal.This part is used to keep the clothes inside the tub during the wash cycle. The folds in the bellow allow the tub to move separately from the door during the spin cycle.

Videos For installing this part.

Replacing your Front Load Washer Bellow - Gray

Replacing your Front Load Washer Bellow - Gray play video
Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.9 / 5.0, 13 reviews.
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    James from Springfield, VA
  • Parts Used:
    WPW10111435
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Water leaking at bottom of door
Baught new seal went to look at old one to make sure drain hole lined up and found ring with 2 keys, quarter,penny and a golf ball marker. I removed them and no more leak!
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Steven from Danville, CA
  • Parts Used:
    WPW10111435
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Dirty bellow with strong, unpleasant odor
Replaced with new bellow following instructions on YouTube video. Following directions, disassembly was very easy. Only tricky part of re-assembly was installation of final retainer ring, but using 2 screw drivers, I was able to get it around the bellows and into the groove. No leaks and no more smell!
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Kathleen M from Lynnwood, WA
  • Parts Used:
    WPW10111435, 4930JJ2021A
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set
Replacing a rubber gasket on a front loader washer/ Kenmore made by LG
You tube will be your best bet for assistance!! This replacement went very well with the assistance of You Tube - make certain you have correct model for replacement instructions however - each MFR model will have slightly different componentry in the steps required , which is significant! It probably took my husband a little longer because this is something we typically do not do, we did have all the required tools which helps as well!!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    David from Rochester Hills, MI
  • Parts Used:
    WPW10111435
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
Washer was leaking out of the front. bellows had a tear in it
Using soap to lubricate the inner seal made that procedure go smoothly. I found it easier to use needlenose pliers to reattach the spring holder to the door assembly than using a screw driver.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    wayne from middletown, RI
  • Parts Used:
    WPW10111435
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
The spring the hold the top gets little jam but works
Follow the instructions from the video and will get it done
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Roy from Gilroy, CA
  • Parts Used:
    W11032829, WPW10111435
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
The bellows was hard to get around the drum
My problem was really shipping. The clamp came flat in a box inside a larger box. The bellows came in a very small box all twisted so it would fit. I had to put the bellows in the dryer to warm it up to get all the kinks out of it. Even at that it wanted to curl up to the shape it was in the box. Also the spring on the front clamp was so tight I could not get it to stretch over the drum so I used the old one. Working well now.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    John from Cumming, GA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
The washer was leaking at the bottom of the door.
I figured out that the bellows needed replacing. I followed the instructional video supplied by this site. It was easy to take the washer apart along with the bellows but I had a HELL of a time getting the thing back on. It took some tweaking and patience but I got it on there nice a secure. Don't forget to put a little dish washing liquid around the rim where the bellows goes. It made the job a little easier. All in all I saved a couple hundred bucks doing it myself,
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Megan from Natrona Heights, PA
  • Parts Used:
    WPW10111435
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
Our bellow was torn
Took off the three front plates, removed the retaining wire, disconnected the bellow from the front of the washer, removed the detergent hose, pushed the bellow to the inside of the washer and removed the inner retaining wire, disconnected the old bellow and set it aside, cleaned out the area where the new bellow would be seated, seated the new bellow on the inside and replaced the retaining wire, replaced detergent hose, fit bellow on the outside of the washer and replaced the retaining wire, ensured that the new bellow was seated and sturdy, replaced the three front panels... Done!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Richard from Corona, CA
  • Parts Used:
    WPW10111435
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
Washer leaking at bottom of door bellows
Followed the online video associated with the part. Had ONE minor exception. Whirlpool added a screw inserted up from the bottom center of the control panel that did not show in the video. It requires a Phillips screwdriver to remove it so the control panel will tilt out at the bottom. Rest of the video shows the process well, the bellows was floppy and hard to align, but once it was lined up at the critical bottom it went in easily. Replacing the control panel needed a bit of fiddling to get the screw tab inside the bottom of the panel into the right place to replace the 'extra' screw. Washer no longer leaks, and this saved me a ton of money!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    daniel from alto, MI
  • Parts Used:
    WPW10111435
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
the video made it look very easy to install the bellows but i couldn't install like it discribed
i called a service company
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
    Sort by:
    Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Compatibility
      This part works with the following models:
      Fix Number: FIX11748353
      Manufacturer Part Number: WPW10111435
      Brand
      Model Number
      Description
      Kenmore
      11046462500
      Washer
      Kenmore
      11046462501
      Washer
      Kenmore
      11046472500
      Washer
      Kenmore
      11046472501
      Washer
      Kenmore
      11047511700
      Washer
      Kenmore
      11047511701
      Washer
      Kenmore
      11047511702
      Washer
      Kenmore
      11047512600
      Washer
      Kenmore
      11047512601
      Washer
      Kenmore
      11047512602
      Washer
      Kenmore
      11047512603
      Washer
      Kenmore
      11047512604
      Washer
      Kenmore
      11047512605
      Washer
      Kenmore
      11047531700
      Washer
      Kenmore
      11047531701
      Washer
      Kenmore
      11047531702
      Washer
      Kenmore
      11047532600
      Washer
      Kenmore
      11047532601
      Washer
      Kenmore
      11047532602
      Washer
      Kenmore
      11047532603
      Washer
      Kenmore
      11047532604
      Washer
      Kenmore
      11047532605
      Washer
      Kenmore
      11047542600
      Washer
      Kenmore
      11047542601
      Washer
      Kenmore
      11047542602
      Washer
      Kenmore
      11047542603
      Washer
      Kenmore
      11047542604
      Washer
      Kenmore
      11047542605
      Washer
      Kenmore
      11047561600
      Washer
      Kenmore
      11047561601
      Washer