Dishwasher Wheels and Rollers

★★★★★

★★★★★

12 Reviews

Fix Number

FIX3406971

Manufacturer Part Number

W10195416

This OEM gray plastic lower dishrack wheel assembly allows the rack to slide in and out of the dishwasher with ease. It measures roughly 3 by 6 inches. If it breaks or becomes damaged it may make sliding in and out feel difficult. This is a normal wear and tear item and will need to be replaced when this happens. It attaches directly to the dishrack and is a quick and easy repair. There are 4 dishrack wheel assemblies in total on your appliance, so this is a good time to inspect all 4, as this part is sold individually. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel.

★★★★★

★★★★★

6 Reviews

Fix Number

FIX11750057

Manufacturer Part Number

WPW10195417

This gray plastic lower dishrack roller is a part for your dishwasher. It attaches to the bottom of the lower dishrack, allowing it to move in and out smoothly. If the lower dishrack stops moving in and out easily or preventing you from being able to shut the dishwasher door, inspect the dishrack roller for damage. The assembly includes 2 rollers and the bracket that attaches to the dishrack (parts are not sold separately). This assembly is sold individually, so you will need 4 assemblies to replace them all in your appliance. For this easy repair, start by removing the lower dishrack from the appliance and set it on the counter. Use a screwdriver to pry off the old roller assembly from the lower tabs. Align the new part on the dishrack by snapping it in place.

Fix Number

FIX16217024

Manufacturer Part Number

WD12X26146

The roller helps the lower rack of your dishwasher to smoothly slide in and out of your appliance. A broken or worn roller wheel can make it clunky or difficult to get the rack in and out of the dishwasher, and the part should be replaced. The rollers are sold individually, however there are four in total in your dishwasher. You may want to replace all at the same time to ensure they have even wear. Replacing a broken roller is a simple job and may require the use of a flat blade screwdriver. Remove the entire lower rack from your dishwasher and place it on a suitable work surface. Release the tabs to open the cover on the roller assembly, using the screwdriver if necessary to pry them open. Pull the damaged wheel off the assembly and push the new one into place. Reattached the cover and place the rack back into the bottom of your dishwasher. The lower rack should now easily glide in and out. These rollers are genuine OEM parts that measure approximately 1.5 inches in diameter and are charcoal in color.

★★★★★

★★★★★

3 Reviews

Fix Number

FIX8727387

Manufacturer Part Number

00611475

This part includes one grey plastic wheel with the attachment, designed for your lower dishrack. It allows you to slide the dishrack in and out smoothly. If one of these wheels is missing or damaged, it can make it difficult to slide the rack in and out and can make it impossible to close the dishwasher door. Replacing this part is simple, snap it off the dishrack, and snap the new one into place. Note that each wheel is sold separately, so order accordingly.

★★★★★

★★★★★

1 Review

Fix Number

FIX11756470

Manufacturer Part Number

WPW10571738

This genuine OEM replacement part is a dishrack adjuster and wheel assembly for your dishwasher. This part lets you adjust the height of the top rack, along with the wheels for the rack. Please note that this part is sold individually. If this part has become damaged, you may struggle to adjust the height of the dishrack, or it may not glide in or out smoothly. If this has happened, the broken part should be replaced. No tools are required for this repair, although you may find a small flat blade screwdriver is helpful to release any locking tabs.

Fix Number

FIX17219660

Manufacturer Part Number

5304535381

This is sold individually. Please order quantity required.

Fix Number

FIX12075858

Manufacturer Part Number

4581DD3003C

The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the track in your dishwasher, makes noises, the door will not close, or the dishes are not getting clean, then it is best to replace it for more security. A flat blade screw driver is the only tool needed for this installation. Open the lower dishwasher rack and remove retaining tabs from both ends of the rack and slide it out. Locate the older roll assembly, remove it and replace the rollers. Remember to put the tabs on each side back before sliding it back in. Make sure the dishwasher is off before starting this installation project.

★★★★★

★★★★★

1 Review

Fix Number

FIX11750255

Manufacturer Part Number

WPW10204131

This is a genuine OEM replacement rack adjuster for your dishwasher. If this part is damaged, broken, or missing it may cause issues using the top rack properly. To replace this part, first remove the top rack from your dishwasher, by removing the rack stop clips from the ends of the rails. To release the tabs, you can either use your fingers or a flat blade screwdriver to depress the locking tabs. Once the top rack has been removed and placed on a suitable work surface, the defective rack adjuster can be removed, once again using either your fingers or screwdriver to disengage the tabs. The new rack adjuster can then be snapped into place.

Fix Number

FIX16618942

Manufacturer Part Number

WD12X27747

★★★★★

★★★★★

2 Reviews

Fix Number

FIX11745459

Manufacturer Part Number

WP8268743

The wheel mount for the upper rack of your dishwasher ensures that the top rack easily slides along the track when pulling it in and out. If a wheel or the mount becomes damaged, your top rack will not be balanced and will be difficult to use. This can result in dishes not being cleaned properly or even becoming damaged. There are two different wheel mounts per each side of the top rack, located in the middle and back of the rack. This part is sold individually and is interchangeable for which side it is used on. If you need to replace more than one wheel mount, please be sure to order the correct quantity. The mount simply slides onto the rack and then clips into place, but a flat head screwdriver may be required to remove the rail stops in order to take the top rack out of the dishwasher.