Official LG Dishwasher Wheels and Rollers

Dishwasher Roller Assembly

$15.26

Fix Number: FIX12075858
Manufacturer Part Number: 4581DD3003C

The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the track in your dishwasher, makes noises, the door will not close, or the dishes are not getting clean, then it is best to replace it for more security. A flat blade screw driver is the only tool needed for this installation. Open the lower dishwasher rack and remove retaining tabs from both ends of the rack and slide it out. Locate the older roll assembly, remove it and replace the rollers. Remember to put the tabs on each side back before sliding it back in. Make sure the dishwasher is off before starting this installation project.

Roller with Axle

$13.07

★★★★★

1 Review

Fix Number: FIX3523050
Manufacturer Part Number: 4581DD3002A

This is a roller and axle, which mounts to the dishwasher rack (sold independently). It is gray in color, made of plastic, and measures approximately an inch in diameter, with the axle making it roughly 1-1/2 inches wide. For this simple DIY repair, pull the rack out of the dishwasher while pulling it upward. Pull off the old roller. Line up the new roller on the rack and snap it into place. Place the dishrack back into place, making sure it moves smoothly in and out.