Jenn-Air Dishwasher Wheels and Rollers

★★★★★

★★★★★

12 Reviews

Fix Number

FIX3406971

Manufacturer Part Number

W10195416

This OEM gray plastic lower dishrack wheel assembly allows the rack to slide in and out of the dishwasher with ease. It measures roughly 3 by 6 inches. If it breaks or becomes damaged it may make sliding in and out feel difficult. This is a normal wear and tear item and will need to be replaced when this happens. It attaches directly to the dishrack and is a quick and easy repair. There are 4 dishrack wheel assemblies in total on your appliance, so this is a good time to inspect all 4, as this part is sold individually. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel.

★★★★★

★★★★★

6 Reviews

Fix Number

FIX11750057

Manufacturer Part Number

WPW10195417

This gray plastic lower dishrack roller is a part for your dishwasher. It attaches to the bottom of the lower dishrack, allowing it to move in and out smoothly. If the lower dishrack stops moving in and out easily or preventing you from being able to shut the dishwasher door, inspect the dishrack roller for damage. The assembly includes 2 rollers and the bracket that attaches to the dishrack (parts are not sold separately). This assembly is sold individually, so you will need 4 assemblies to replace them all in your appliance. For this easy repair, start by removing the lower dishrack from the appliance and set it on the counter. Use a screwdriver to pry off the old roller assembly from the lower tabs. Align the new part on the dishrack by snapping it in place.

Fix Number

FIX11753471

Manufacturer Part Number

WPW10350401

If the upper rack of your dishwasher has become difficult to roll in and out, or it keeps getting jammed, you may need to replace one or more wheels. Over time the plastic can become brittle, or deteriorate from the soap and chemicals in the dishwasher. If you need to replace a wheel, this is a genuine OEM part. Please note that they are sold individually, so if more than one wheel needs to be replaced be sure to order the correct quantity. To change out a wheel, you will need to remove the top rack from the dishwasher by removing the rail stop clips. Place the rack on a suitable work surface, and use a flat blade screwdriver to pop open the tabs holding the wheel mount in place.

Fix Number

FIX11747757

Manufacturer Part Number

WP99003149

This is a genuine OEM replacement lower wheel and axle assembly for the bottom rack in your dishwasher. The wheel is gray in color, is made of plastic, and measures approximately 1.75 inches in diameter. This part is sold individually so if you need to replace more than one wheel, be sure to order the appropriate quantity. Replacing this part is a very simple task that does not require any tools. Simply remove the empty rack from the bottom of the dishwasher and place it on a suitable work surface. Remove the damaged wheel, and snap the new one into place. The rack can be placed back into the dishwasher, where it should now easily glide in and out.

Fix Number

FIX11747756

Manufacturer Part Number

WP99003148

★★★★★

★★★★★

1 Review

Fix Number

FIX11748156

Manufacturer Part Number

WPW10078214

Sold individually.

Fix Number

FIX11747717

Manufacturer Part Number

WP99002780

The rollers on the lower rack in your dishwasher allow the rack to smoothly roll in and out of the appliance. If a roller wheel has become damaged or broken off, it should be replaced so that the rack can continue to glide easily. This genuine OEM part is made of white plastic and includes both the wheel and axel as an assembly, and they are sold as individual units. The rollers in your dishwasher tend to wear at the same rate, so we do recommend replacing all wheels on your lower dish rack at the same time. No tools should be required to do this repair, the old wheel pops off the rack and the new wheel snaps into place.

★★★★★

★★★★★

1 Review

Fix Number

FIX11755768

Manufacturer Part Number

WPW10505748

If your dishrack is difficult to roll in and out of your dishwasher, you may need to replace the rollers. This dishrack roller is a genuine OEM part that is gray in color and made of plastic. The assembly comes with two rollers on a supporting bracket. The part is used to support the dishrack on the rails and allows the rack to smoothly roll in and out of the dishwasher. If the rollers have become damaged or jammed, they will need to be replaced. When replacing this part, you will need to remove the upper rack from your dishwasher.

Fix Number

FIX11745449

Manufacturer Part Number

WP8268645

Sold Individually - 4 required on rack.

Fix Number

FIX11746834

Manufacturer Part Number

WP903093

This upper dishwasher dishrack roller is just over an inch in diameter. It is all white in color and is made entirely of plastic.