Jenn-Air Dishwasher Dishracks

★★★★★

★★★★★

2 Reviews

Fix Number

FIX11746591

Manufacturer Part Number

WP8565925

This is a single rack track stop clip used to prevent the upper dish rack from sliding all the way out of the dishwasher. It is made of gray plastic and can wear with time. This is an easy repair that should not take very long to complete. Start by opening the dishwasher door, depress the tabs to remove both the front stop clips and remove the upper dish rack from the appliance. Now, using your small flat head screwdriver, release the retaining tab to remove the rear stop track that you are replacing, and pull the clip up to remove it. Install the new clip by inserting it into the support rail from the top and press it down to secure it in place.

★★★★★

★★★★★

4 Reviews

Fix Number

FIX11756150

Manufacturer Part Number

WPW10546503

This dishrack adjuster attaches to the side of the top dishrack and fits both the left and ride side. If you are looking to replace both sides, you will need to order 2 of this part, as they are sold separately. It connects to the track, making it possible to move the rack in and out as well as raise up and down to accommodate different size items. If this part breaks, it may make it difficult for the rack to slide in and out with ease, in which case it will need to be replaced, as this can lead to further issues. For this repair, remove the upper rack from the dishwasher, detach the adjuster housing cover and then detach the front and rear adjuster support straps from the tines. Pry off the stop clip to detach the old adjuster. Align the new adjuster on the rack and snap the stop clip in place to secure it. Place the front and rear support straps back on. Position the adjuster housing and place the cover back on to secure. Place the rack back into the dishwasher.

★★★★★

★★★★★

42 Reviews

Fix Number

FIX10064063

Manufacturer Part Number

W10712394

This rack adjuster kit is connected to the dishrack and allows you to adjust the height of the upper rack of your dishwasher up and down to give more space. The kit is constructed of gray plastic and metal, and measures approximately 12 inches wide and 6.5 inches tall. This kit includes 2 adjuster arms, 2 adjuster actuators, 2 gray adjuster covers, 2 gray adjuster housings, and 4 screws. The rack adjuster can break from material fatigue or prolonged high temperature exposure, compromising the integrity of the materials. The most common indicators of a faulty rack adjuster include leaking, door latch failure, the door not closing, dishes not cleaning properly, and failure to start the wash cycle. This kit includes the parts to replace the left and right-side rack adjusters and has been upgraded to a more durable metal design. Replacing this part requires beginner repair experience, basic hand tools, and some disassembly of the dishwasher. Do not forget to unplug the dishwasher or shut off the water supply to the appliance underneath the sink before you begin.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX11750071

Manufacturer Part Number

WPW10195622

The genuine OEM replacement rack stop clip is for dishwashers. It measures just over an inch and is made of gray plastic. The purpose of this part is to prevent your dishwasher rack from pulling out too far and falling out of the dishwasher. If you have difficulties closing your door, your rack continuously falling off, or a door latch failure, you may need to replace this part. They are sold individually and can be used on the right or left side of the upper dish rack. It is recommended to replace both sides at the same time, meaning you will need to order 2 of this part. For this easy repair, start by pulling out the rack, then use your screwdriver to reach behind the rack stops and push on the clips. This should allow you to remove the stops from the track. Next, slide the track back over the rollers and snap the new track stop in place.

★★★★★

★★★★★

3 Reviews

Fix Number

FIX11748190

Manufacturer Part Number

WPW10082853

Having adjustable tines in your dishwasher can be very useful to ensure your dishes are secure during the wash cycle. The Tine Pivot clip helps to keep those moveable tine rows in place on your dish rack. If you notice your dishes are not cleaning properly, it may be that your Tine Pivots are broken or damaged and should be replaced. This part, also called a tine row pivot, is about 3 inches in length, made of plastic, and is found on the top rack of your dishwasher. Replacing the part is an easy job, with no tools required. Ensure you have removed all dishes from the top rack before you begin this repair. Release and lift out the damaged clip, line up the new one along the tines, and snap into place. With the new Tine Pivot in place, your tine rows should stay held in place, ensuring your dishes get cleaned properly. This is a genuine OEM part and is sold individually.

Fix Number

FIX11750093

Manufacturer Part Number

WPW10195840

The dishwasher positioner clip is also known as a rack adjuster and is used to hold the top rack in your dishwasher in the desired position. If the rack is not staying in place, the clip may have become damaged and should be replaced so that your dishwasher can clean as efficiently as possible. No tools are required for this repair, but you may find a flat blade screwdriver useful for prying off stubborn parts. To replace this part, you will need to take the top rack completely out of the dishwasher, and this will require removing the track stop clips from the ends of the rail. Once the rack is on a suitable work surface, remove the broken clip by releasing the locking tab and install the new one ensuring it clicks into place. The upper rack can now be placed back into the dishwasher, and the track stop clips can be reattached.

Fix Number

FIX12584377

Manufacturer Part Number

W11259786

If the upper rack on your dishwasher has become difficult to slide in and out, you may need to replace the slide track. This genuine OEM part is for the right side of your appliance. The left or right side is determined based on facing the machine. If you need to replace both slide tracks, the left-hand one can be purchased separately. The purpose of a slide track is to support the dishrack and helps it open and close easily, so it is important that they are functioning properly. To replace this part, you will need to pull the dishwasher out from under the cabinet to access the screws holding the rails in place. Be sure that you have enough slack in the power and water lines to allow you to pull the appliance out approximately 18 inches, otherwise be sure to disconnect them from the dishwasher.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX12584376

Manufacturer Part Number

W11259785

If the dish rack in your dishwasher is no longer sliding in and out easily, it may be time to replace the slide track. This genuine OEM part is used for the left-hand side of your dishwasher dish rack. If you need to replace both tracks, the right-hand one can be ordered separately. In order to replace this part, you will need access to the exterior sides of your dishwasher. This may require you to unscrew the mounting hardware and pull the appliance out from under your countertop. Once you have the dishwasher pulled out you will be able to unscrew the old track and install the new replacement.

Fix Number

FIX11750072

Manufacturer Part Number

WPW10195623

This is an authentic OEM replacement drawer track for the upper rack of your dishwasher. Also known as a rack slider bar, it helps to support the top rack and allows it to glide in and out of your dishwasher easily. If it has become warped or damaged, it should be replaced as it may prevent your dishrack from operating properly. This part is sold individually, and is interchangeable for the left and right side of the dishwasher. If you need replacement wheels or rack stop clips, those parts can be purchased separately. Replacing this part is an easy repair, and will require a flat blade screwdriver to pop open the rear stop clip. The entire top rack assembly is removed from the dishwasher, the damaged track is replaced with the new one, and then the rear stop clip is reattached and the rack put back in.

Fix Number

FIX11750092

Manufacturer Part Number

WPW10195839

The dishrack adjuster, also known as an adjuster clip, is used to change the height of the top rack in your dishwasher. If the clip has become damaged, it may not function properly, which would result in your dishrack not staying in the desired position. If this happens, the clips should be replaced. These are genuine OEM replacement rack adjusters, which are sold individually.