Official KitchenAid Dishwasher Wheels and Rollers

Lower Dishrack Wheel

$46.04

Fix Number: FIX3406971
Manufacturer Part Number: W10195416

This OEM gray plastic lower dishrack wheel assembly allows the rack to slide in and out of the dishwasher with ease. It measures roughly 3 by 6 inches. If it breaks or becomes damaged it may make sliding in and out feel difficult. This is a normal wear and tear item and will need to be replaced when this happens. It attaches directly to the dishrack and is a quick and easy repair. There are 4 dishrack wheel assemblies in total on your appliance, so this is a good time to inspect all 4, as this part is sold individually. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel.

Fixes these symptoms

Door latch failure
Door won’t close
Leaking
See more...

Lower Dishrack Wheel Assembly

$36.73

★★★★★

6 Reviews

Fix Number: FIX11750057
Manufacturer Part Number: WPW10195417

This gray plastic lower dishrack roller is a part for your dishwasher. It attaches to the bottom of the lower dishrack, allowing it to move in and out smoothly. If the lower dishrack stops moving in and out easily or preventing you from being able to shut the dishwasher door, inspect the dishrack roller for damage. The assembly includes 2 rollers and the bracket that attaches to the dishrack (parts are not sold separately). This assembly is sold individually, so you will need 4 assemblies to replace them all in your appliance. For this easy repair, start by removing the lower dishrack from the appliance and set it on the counter. Use a screwdriver to pry off the old roller assembly from the lower tabs. Align the new part on the dishrack by snapping it in place.

Fixes these symptoms

Door latch failure
Door won’t close
See more...

Watch the install video

Upper Rack Wheel with Mount

$29.38

★★★★★

2 Reviews

Fix Number: FIX11745451
Manufacturer Part Number: WP8268655

If the top rack of your dishwasher is no long sliding in and out smoothly, you may need to replace one of the wheels. This genuine OEM parts assembly includes the wheel, the mount, the axel, and the clip. They are sold individually, and most dishwasher top racks have four wheel-mounts in total. If you need to replace more than one wheel, be sure to add the correct quantity to your cart. Replacing these are an easy repair and does not require any tools, simply pop off the broken wheel mount and snap the new one into place.

Fixes these symptoms

Door latch failure
Door won’t close
Noisy
See more...

Dishwasher Upper Dish Rack Wheel Mount

$29.90

★★★★★

2 Reviews

Fix Number: FIX11745459
Manufacturer Part Number: WP8268743

The wheel mount for the upper rack of your dishwasher ensures that the top rack easily slides along the track when pulling it in and out. If a wheel or the mount becomes damaged, your top rack will not be balanced and will be difficult to use. This can result in dishes not being cleaned properly or even becoming damaged. There are two different wheel mounts per each side of the top rack, located in the middle and back of the rack. This part is sold individually and is interchangeable for which side it is used on. If you need to replace more than one wheel mount, please be sure to order the correct quantity. The mount simply slides onto the rack and then clips into place, but a flat head screwdriver may be required to remove the rail stops in order to take the top rack out of the dishwasher.

Fixes these symptoms

Door latch failure
Door won’t close
Noisy
See more...

Watch the install video

Upper Rack Wheel and Mount Assembly

$11.30

Fix Number: FIX11745525
Manufacturer Part Number: WP8270019

If you are unable to smoothly roll the top dish rack of your dishwasher, you may need to replace some of the wheel assemblies. Over time they can become cracked and damaged, and once this happens, they no longer glide smoothly along the rails. If you need a replacement, this is a genuine OEM wheel and mount assembly for the upper rack in your dishwasher. Please note that they are sold individually, so if you need to replace more than one wheel assembly, be sure to add the correct quantity to your cart.

Fixes these symptoms

Not cleaning dishes properly
See more...

Dishwasher Upper Rack Roller

$42.40

Fix Number: FIX11753471
Manufacturer Part Number: WPW10350401

If the upper rack of your dishwasher has become difficult to roll in and out, or it keeps getting jammed, you may need to replace one or more wheels. Over time the plastic can become brittle, or deteriorate from the soap and chemicals in the dishwasher. If you need to replace a wheel, this is a genuine OEM part. Please note that they are sold individually, so if more than one wheel needs to be replaced be sure to order the correct quantity. To change out a wheel, you will need to remove the top rack from the dishwasher by removing the rail stop clips. Place the rack on a suitable work surface, and use a flat blade screwdriver to pop open the tabs holding the wheel mount in place.

Fixes these symptoms

Door won’t close
See more...

Watch the install video

Lower Dishrack Wheel

$49.72

Fix Number: FIX11748193
Manufacturer Part Number: WPW10082868

This part attaches to the lower dishrack.

Upper Rack Wheel

$31.39

★★★★★

1 Review

Fix Number: FIX11748156
Manufacturer Part Number: WPW10078214

Sold individually.

Stationary Wheel and Mount

$30.32

★★★★★

1 Review

Fix Number: FIX11745464
Manufacturer Part Number: WP8268785

Sold individually.

Fixes these symptoms

Door won’t close
See more...

Watch the install video

Dishwasher Dishrack Roller

$11.10

★★★★★

1 Review

Fix Number: FIX11755768
Manufacturer Part Number: WPW10505748

If your dishrack is difficult to roll in and out of your dishwasher, you may need to replace the rollers. This dishrack roller is a genuine OEM part that is gray in color and made of plastic. The assembly comes with two rollers on a supporting bracket. The part is used to support the dishrack on the rails and allows the rack to smoothly roll in and out of the dishwasher. If the rollers have become damaged or jammed, they will need to be replaced. When replacing this part, you will need to remove the upper rack from your dishwasher.

KitchenAid Dishwasher Wheels and Rollers

Popular KitchenAid Dishwasher Wheels and Rollers

Related Parts

KitchenAid Dishwasher Wheels and Rollers

Start With Your Model Number

Popular KitchenAid Dishwasher Wheels and Rollers

Related Parts