KitchenAid Dishwasher Dishracks

KitchenAid Appliance Parts

Popular KitchenAid Dishwasher Dishracks

★★★★★
★★★★★
10 Reviews
Fix Number
FIX10065979
Manufacturer Part Number
W10712395
This OEM dishwasher upper rack adjuster kit includes the left and ride side adjusters and all the parts needed to repair the upper rack. These parts have changed from plastic to metal, so even though it looks different than the original part, it is made to be perfectly compatible. This part is located on the dishwasher rack and is connected to the track, allowing it to move in and out smoothly. If this part is damaged, it may make it difficult to move the rack in and out or it might hang down awkwardly, indicating a repair is needed.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Leaking
  • See more...
Rack Track Stop
$7.70
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX11746591
Manufacturer Part Number
WP8565925
This is a single rack track stop clip used to prevent the upper dish rack from sliding all the way out of the dishwasher. It is made of gray plastic and can wear with time. This is an easy repair that should not take very long to complete. Start by opening the dishwasher door, depress the tabs to remove both the front stop clips and remove the upper dish rack from the appliance. Now, using your small flat head screwdriver, release the retaining tab to remove the rear stop track that you are replacing, and pull the clip up to remove it. Install the new clip by inserting it into the support rail from the top and press it down to secure it in place.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Noisy
  • See more...
Dishwasher Upper Rack Adjuster
$43.81
In Stock
★★★★★
★★★★★
4 Reviews
Fix Number
FIX11756150
Manufacturer Part Number
WPW10546503
This dishrack adjuster attaches to the side of the top dishrack and fits both the left and ride side. If you are looking to replace both sides, you will need to order 2 of this part, as they are sold separately. It connects to the track, making it possible to move the rack in and out as well as raise up and down to accommodate different size items. If this part breaks, it may make it difficult for the rack to slide in and out with ease, in which case it will need to be replaced, as this can lead to further issues. For this repair, remove the upper rack from the dishwasher, detach the adjuster housing cover and then detach the front and rear adjuster support straps from the tines. Pry off the stop clip to detach the old adjuster. Align the new adjuster on the rack and snap the stop clip in place to secure it. Place the front and rear support straps back on. Position the adjuster housing and place the cover back on to secure. Place the rack back into the dishwasher.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Leaking
  • See more...
★★★★★
★★★★★
42 Reviews
Fix Number
FIX10064063
Manufacturer Part Number
W10712394
This rack adjuster kit is connected to the dishrack and allows you to adjust the height of the upper rack of your dishwasher up and down to give more space. The kit is constructed of gray plastic and metal, and measures approximately 12 inches wide and 6.5 inches tall. This kit includes 2 adjuster arms, 2 adjuster actuators, 2 gray adjuster covers, 2 gray adjuster housings, and 4 screws. The rack adjuster can break from material fatigue or prolonged high temperature exposure, compromising the integrity of the materials. The most common indicators of a faulty rack adjuster include leaking, door latch failure, the door not closing, dishes not cleaning properly, and failure to start the wash cycle. This kit includes the parts to replace the left and right-side rack adjusters and has been upgraded to a more durable metal design. Replacing this part requires beginner repair experience, basic hand tools, and some disassembly of the dishwasher. Do not forget to unplug the dishwasher or shut off the water supply to the appliance underneath the sink before you begin.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Leaking
  • See more...
Rack Stop Clip
$8.10
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX11750071
Manufacturer Part Number
WPW10195622
The genuine OEM replacement rack stop clip is for dishwashers. It measures just over an inch and is made of gray plastic. The purpose of this part is to prevent your dishwasher rack from pulling out too far and falling out of the dishwasher. If you have difficulties closing your door, your rack continuously falling off, or a door latch failure, you may need to replace this part. They are sold individually and can be used on the right or left side of the upper dish rack. It is recommended to replace both sides at the same time, meaning you will need to order 2 of this part. For this easy repair, start by pulling out the rack, then use your screwdriver to reach behind the rack stops and push on the clips. This should allow you to remove the stops from the track. Next, slide the track back over the rollers and snap the new track stop in place.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Not cleaning dishes properly
  • See more...
Tine Pivot
$9.89
In Stock
★★★★★
★★★★★
3 Reviews
Fix Number
FIX11748190
Manufacturer Part Number
WPW10082853
Having adjustable tines in your dishwasher can be very useful to ensure your dishes are secure during the wash cycle. The Tine Pivot clip helps to keep those moveable tine rows in place on your dish rack. If you notice your dishes are not cleaning properly, it may be that your Tine Pivots are broken or damaged and should be replaced. This part, also called a tine row pivot, is about 3 inches in length, made of plastic, and is found on the top rack of your dishwasher. Replacing the part is an easy job, with no tools required. Ensure you have removed all dishes from the top rack before you begin this repair. Release and lift out the damaged clip, line up the new one along the tines, and snap into place. With the new Tine Pivot in place, your tine rows should stay held in place, ensuring your dishes get cleaned properly. This is a genuine OEM part and is sold individually.
Fixes these symptoms
Fix Number
FIX11750093
Manufacturer Part Number
WPW10195840
The dishwasher positioner clip is also known as a rack adjuster and is used to hold the top rack in your dishwasher in the desired position. If the rack is not staying in place, the clip may have become damaged and should be replaced so that your dishwasher can clean as efficiently as possible. No tools are required for this repair, but you may find a flat blade screwdriver useful for prying off stubborn parts. To replace this part, you will need to take the top rack completely out of the dishwasher, and this will require removing the track stop clips from the ends of the rail. Once the rack is on a suitable work surface, remove the broken clip by releasing the locking tab and install the new one ensuring it clicks into place. The upper rack can now be placed back into the dishwasher, and the track stop clips can be reattached.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Not cleaning dishes properly
  • See more...
Fix Number
FIX12584377
Manufacturer Part Number
W11259786
If the upper rack on your dishwasher has become difficult to slide in and out, you may need to replace the slide track. This genuine OEM part is for the right side of your appliance. The left or right side is determined based on facing the machine. If you need to replace both slide tracks, the left-hand one can be purchased separately. The purpose of a slide track is to support the dishrack and helps it open and close easily, so it is important that they are functioning properly. To replace this part, you will need to pull the dishwasher out from under the cabinet to access the screws holding the rails in place. Be sure that you have enough slack in the power and water lines to allow you to pull the appliance out approximately 18 inches, otherwise be sure to disconnect them from the dishwasher.
Fixes these symptoms
★★★★★
★★★★★
2 Reviews
Fix Number
FIX12584376
Manufacturer Part Number
W11259785
If the dish rack in your dishwasher is no longer sliding in and out easily, it may be time to replace the slide track. This genuine OEM part is used for the left-hand side of your dishwasher dish rack. If you need to replace both tracks, the right-hand one can be ordered separately. In order to replace this part, you will need access to the exterior sides of your dishwasher. This may require you to unscrew the mounting hardware and pull the appliance out from under your countertop. Once you have the dishwasher pulled out you will be able to unscrew the old track and install the new replacement.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Noisy
  • See more...
Dishwasher Silverware Basket
$53.44
In Stock
★★★★★
★★★★★
4 Reviews
Fix Number
FIX11746119
Manufacturer Part Number
WP8531233
If the silverware basket in your dishwasher has become damaged, this is a certified OEM replacement. Continuing to use a damaged silverware basket can result in your cutlery not being cleaned properly, or cause items to fall into the bottom of the dishwasher. Replacing the basket does not require any tools, simply remove the old one and set the new basket in its place. To prevent damage to the new basket, be careful when placing cutlery into the basket, and being gentle when removing and replacing the entire basket. This basket is dark gray in color and includes removeable basket lids. The basket measures approximately 5 inches wide, 9 inches high, and 20 inches long.
Fixes these symptoms

Related KitchenAid Dishwasher Parts