Hotpoint Dishwasher Wheels and Rollers

Hotpoint Appliance Parts

Popular Hotpoint Dishwasher Wheels and Rollers

Fix Number
FIX16217024
Manufacturer Part Number
WD12X26146
The roller helps the lower rack of your dishwasher to smoothly slide in and out of your appliance. A broken or worn roller wheel can make it clunky or difficult to get the rack in and out of the dishwasher, and the part should be replaced. The rollers are sold individually, however there are four in total in your dishwasher. You may want to replace all at the same time to ensure they have even wear. Replacing a broken roller is a simple job and may require the use of a flat blade screwdriver. Remove the entire lower rack from your dishwasher and place it on a suitable work surface. Release the tabs to open the cover on the roller assembly, using the screwdriver if necessary to pry them open. Pull the damaged wheel off the assembly and push the new one into place. Reattached the cover and place the rack back into the bottom of your dishwasher. The lower rack should now easily glide in and out. These rollers are genuine OEM parts that measure approximately 1.5 inches in diameter and are charcoal in color.
★★★★★
★★★★★
1 Review
Fix Number
FIX17873321
Manufacturer Part Number
WD01X35298
- Includes: 4 brackets, 4 roller wheel brackets, and 8 wheels part # WD12X26146 Dishwasher Lower Dishrack Carrier and Roller Kit (Set of 4). This kit will replace all four one piece roller carriers with two piece roller carriers. Match each carrier and cover designated for the side being replaced and replace all four carriers
Fixes these symptoms
Lower Rack Roller & Stud Assembly
$12.95
In Stock
Fix Number
FIX16618942
Manufacturer Part Number
WD12X27747
★★★★★
★★★★★
4 Reviews
Fix Number
FIX11726733
Manufacturer Part Number
WD35X21038
The wheels on the lower rack of your dishwasher allow for the rack to slide in and out smoothly. If this is not happening, it may be necessary to replace one or more of the wheels. This kit includes 8 wheels along with 8 axels, both of which are made of white plastic. Replacing a wheel is easy, and just requires a set of pliers. For this repair, you will want to remove the bottom rack from your dishwasher and place it on a solid work surface. Remove the damaged wheels from the rack by unclipping the axel and pulling them off. Insert the new axel into the new wheel pushing firmly until it locks into place. Slide the axel onto the rack, and clip into place. As this kit contains genuine OEM parts, it ensures the parts will be the proper fit for your appliance model.
Fixes these symptoms
★★★★★
★★★★★
2 Reviews
Fix Number
FIX3486910
Manufacturer Part Number
WD12X10327
If the upper rack in your dishwasher is not sliding in and out properly, the rollers may need to be replaced. Faulty rollers can also cause your rack to fall off the track, the door may not close properly, and can make the machine noisy while operating. To replace this part, you will need a flat blade screwdriver in order to remove the rail stop clips from the track, which allows you to completely remove the top rack from your dishwasher. Once you have the top rack on a suitable work surface, the old rollers easily pop off and the new ones can be clipped into place. This kit comes with four genuine OEM rollers and axles, which are white in color and made of plastic.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Noisy
  • See more...
Roller Rack
$13.95
In Stock
Fix Number
FIX16554615
Manufacturer Part Number
WD12X27578
Fix Number
FIX259136
Manufacturer Part Number
WD12X271
This wheel is located on the front lower rack. It includes the axle. Sold individually.
Fixes these symptoms
  • Door won’t close
  • Not cleaning dishes properly
  • See more...
Fix Number
FIX11721505
Manufacturer Part Number
WD35X20994
This is a kit of 4 which includes the wheels and axels.
Fixes these symptoms
Fix Number
FIX2353872
Manufacturer Part Number
WD12X10278
This is a genuine OEM replacement axle for the lower rack in your dishwasher. The axle is used to mount the roller wheel to the rack. If it becomes damaged, you may have difficulty gliding the bottom rack in and out of the dishwasher. Please note that this part is just the axle, no wheels are included and must be purchased separately if new ones are needed. The axle is sold individually, so if you need to replace more than one, please be sure to add the correct quantity to your cart.
Fixes these symptoms
  • Door won’t close
  • Not cleaning dishes properly
  • See more...
UPPER RACK ROLLER AND STUD ASSEMBLY
$14.95
In Stock
Fix Number
FIX16554616
Manufacturer Part Number
WD12X27743

Related Hotpoint Dishwasher Parts