Official General Electric Dishwasher Wheels and Rollers

LOWER RACK ROLLER

$13.07

Fix Number: FIX16217024
Manufacturer Part Number: WD12X26146

The roller helps the lower rack of your dishwasher to smoothly slide in and out of your appliance. A broken or worn roller wheel can make it clunky or difficult to get the rack in and out of the dishwasher, and the part should be replaced. The rollers are sold individually, however there are four in total in your dishwasher. You may want to replace all at the same time to ensure they have even wear. Replacing a broken roller is a simple job and may require the use of a flat blade screwdriver. Remove the entire lower rack from your dishwasher and place it on a suitable work surface. Release the tabs to open the cover on the roller assembly, using the screwdriver if necessary to pry them open. Pull the damaged wheel off the assembly and push the new one into place. Reattached the cover and place the rack back into the bottom of your dishwasher. The lower rack should now easily glide in and out. These rollers are genuine OEM parts that measure approximately 1.5 inches in diameter and are charcoal in color.

LOWER RACK ROLLER AND STUD ASSEMBLY

$9.92

Fix Number: FIX16618942
Manufacturer Part Number: WD12X27747

Watch the install video

Lower Rack Wheel Kit - 8 Pack

$29.89

★★★★★

4 Reviews

Fix Number: FIX11726733
Manufacturer Part Number: WD35X21038

The wheels on the lower rack of your dishwasher allow for the rack to slide in and out smoothly. If this is not happening, it may be necessary to replace one or more of the wheels. This kit includes 8 wheels along with 8 axels, both of which are made of white plastic. Replacing a wheel is easy, and just requires a set of pliers. For this repair, you will want to remove the bottom rack from your dishwasher and place it on a solid work surface. Remove the damaged wheels from the rack by unclipping the axel and pulling them off. Insert the new axel into the new wheel pushing firmly until it locks into place. Slide the axel onto the rack, and clip into place. As this kit contains genuine OEM parts, it ensures the parts will be the proper fit for your appliance model.

Fixes these symptoms

Door won’t close
Leaking
Noisy
See more...

Lower Rack Wheel and Stud

$13.16

Fix Number: FIX1481883
Manufacturer Part Number: WD12X10231

The wheels on the racks in your dishwasher allow it to smoothly pull in and out of the appliance. If a wheel becomes broken or damaged due to regular wear or excessive force, it should be replaced so that the rack continues to function as intended. Replacing this part is a simple repair. Remove the broken wheel from the rack and clip the new one in its place. This OEM replacement part is made of durable plastic and is sold individually.

Fixes these symptoms

Not cleaning dishes properly
See more...

Watch the install video

Upper Roller and Axle - Kit of 4

$19.90

★★★★★

2 Reviews

Fix Number: FIX3486910
Manufacturer Part Number: WD12X10327

If the upper rack in your dishwasher is not sliding in and out properly, the rollers may need to be replaced. Faulty rollers can also cause your rack to fall off the track, the door may not close properly, and can make the machine noisy while operating. To replace this part, you will need a flat blade screwdriver in order to remove the rail stop clips from the track, which allows you to completely remove the top rack from your dishwasher. Once you have the top rack on a suitable work surface, the old rollers easily pop off and the new ones can be clipped into place. This kit comes with four genuine OEM rollers and axles, which are white in color and made of plastic.

Fixes these symptoms

Door latch failure
Door won’t close
Noisy
See more...

Dishrack Rollers and Axles - Kit of 8

$32.06

★★★★★

3 Reviews

Fix Number: FIX11725221
Manufacturer Part Number: WD35X21041

This genuine OEM replacement kit includes 8 rollers and axles for the lower rack of your dishwasher. If you have difficult sliding the rack in and out of your dishwasher, or the wheels continue to fall off when the rack is moved, it is time to replace them. This is an easy repair that does not require any tools. Remove the rack from your dishwasher and place on a suitable work surface, then remove the old roller assemblies from the rack. With your new kit, snap the axles into the roller, then snap the complete assembly onto your dishrack. Once all rollers have been attached, the rack can be placed back in your dishwash and should now smoothly roll in and out.

Fixes these symptoms