General Electric Dishwasher Parts

General Electric Appliance Parts

Popular General Electric Dishwasher Parts

Dishwasher Tub Gasket
$35.95
In Stock
Fix Number
FIX11774412
Manufacturer Part Number
WD08X23476
If your dishwasher is leaking water while it is running, there may be an issue with the gasket. Also known as a door gasket, the tub gasket creates a watertight seal between the tub of the dishwasher and the door. This prevents any water from leaking out while the machine is running. If the gasket has become loose, it can be reinserted, however if it is damaged, it will need to be replaced. This is a simple repair that does not require any tools, but you may find needle nose pliers helpful for removing the old gasket. Pull the old gasket out of the groove, and replace with the new one, pressing it into the groove. This part has been sourced from the original manufacturer and is made of black rubber.
Fixes these symptoms

Installation Instructions

Randy from Garber, IA
door leak
Removed old gasket put new one in the same way as the old one. Read more...
LOWER RACK
$93.93
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX17873657
Manufacturer Part Number
WD28X34744
This is an authentic lower dishrack with wheels. Please note that the manufacturer has made a design change, which requires the silverware basket to be relocated from the door to the inside of the rack along the right side. The lower dishrack is where large pots and plates are stored and can be easily rolled in and out of the dishwasher. It is usually replaced because it has started to rust, corrode, or break. Simply slide the old one out, line the new one up with the tracks, and slide it into place, very quick and easy.
Fixes these symptoms
HEATING ELEMENT
$57.30
In Stock
Fix Number
FIX16729156
Manufacturer Part Number
WD05X30818
If your dishes are not dry after a cycle in the dishwasher, they may be an issue with the heating element. This part is used to heat the water in the dishwasher while it is running, and then helps to dry the dishes after they have been cleaned. This is a genuine OEM replacement part for your appliance. Before beginning this repair, be sure to disconnect the power supply to your dishwasher.
Fixes these symptoms
  • Leaking
  • Not cleaning dishes properly
  • Not drying dishes properly
  • See more...
Lower Rack And Swb Replacement Kit
$87.78
In Stock
Fix Number
FIX16618974
Manufacturer Part Number
WD28X28918
This lower rack and silverware basket kit fits select GE dishwashers. It helps keep dishes and utensils secure during the wash cycle and replaces damaged or worn-out racks. The kit includes a durable rack and basket for improved cleaning and organization. Be sure to confirm compatibility before ordering.
Fixes these symptoms
★★★★★
★★★★★
1 Review
Fix Number
FIX17873321
Manufacturer Part Number
WD01X35298
- Includes: 4 brackets, 4 roller wheel brackets, and 8 wheels part # WD12X26146 Dishwasher Lower Dishrack Carrier and Roller Kit (Set of 4). This kit will replace all four one piece roller carriers with two piece roller carriers. Match each carrier and cover designated for the side being replaced and replace all four carriers
Fixes these symptoms
MID SPRAY ARM
$36.42
In Stock
Fix Number
FIX17137080
Manufacturer Part Number
WD22X33498
Fixes these symptoms
  • Leaking
  • Noisy
  • Not cleaning dishes properly
  • See more...
LOWER SPRAY ARM
$30.95
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX17137081
Manufacturer Part Number
WD22X33499
Please be informed that this OEM-verified part that DOES NOT come with the heatshield, as per GE directly and are no longer required. This lower spray arm assembly in your dishwasher distributes water and detergent during the washing cycle by spinning around and spraying water in different directions. You can usually find it attached to a support or hub at the bottom of the dishwasher. If this part is broken, you might notice some signs. You might hear a knocking or banging sound coming from the dishwasher. The spray arm may not rotate properly or might seem wobbly. It is important to replace a damaged arm assembly as your dishes will not get cleaned properly, and they will still have dirt on them even after a wash cycle. It can also cause the dishwasher to have a bad smell because of leftover food residue. To remove your existing arm assembly, you will need to release its locking mechanism before lifting it out of your appliance.
Fixes these symptoms
  • Leaking
  • Noisy
  • Not cleaning dishes properly
  • See more...

Installation Instructions

Kevin from SUN CITY WEST, AZ
Rhythmic noise from bottom spray, arm, banging on heat element
Replace bottom spray arm assembly Read more...
Door Latch
$51.95
In Stock
Fix Number
FIX6447681
Manufacturer Part Number
WD21X10490
If your dishwasher door will not close or latch, or the machine will not start, you may need to replace the door latch. This genuine OEM replacement latch is meant to keep your dishwasher door closed while the machine operates, and if your latch is faulty your appliance may not work as intended. This is an easy repair that just requires a Phillips screwdriver, but you will need to pull the dishwasher out from underneath your counter to access the part. Since there is an electrical component involved, be sure to disconnect the power supply before beginning your repair. At this time, you should also inspect the door strike for damage, and replace that part if necessary.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Will Not Start
  • See more...
Gasket
$33.95
In Stock
Fix Number
FIX11700870
Manufacturer Part Number
WD08X21894
This is a genuine OEM replacement gasket for your dishwasher, that measures approximately 22 inches long and is made of plastic. It is found at the bottom of the inside panel of your dishwasher door. The purpose of the gasket it to provide a tight seal at the bottom of the dishwasher so that water does not leak out while the appliance is operating. If your dishwasher is leaking, you should inspect the gasket for signs of damage and replace it if worn out. Please note that gaskets for sealing around the tub are sold separately. Basic tools are needed for this repair, including a pair of pliers to help with removal of the old gasket. Depending on your model, you may need to remove door panels to access the gasket which would require a Philips screwdriver.
Fixes these symptoms
Configured User Interface Control Board
$218.80
In Stock
Fix Number
FIX17137058
Manufacturer Part Number
WD21X31902C
This is the user interface control board for various dishwashers. The user interface panel is what you directly interact with on your dishwasher to start and stop it and select the specific cycle you want. If your user interface panel is not responding and you have tested your dishwasher to ensure no other part could be at fault, it will need to be replaced immediately for it to regain function. Replacing this panel will requires some disassembly of your dishwasher, and will require tools like a screwdriver, wrench, and a pair of pliers. This OEM user interface panel measures approximately 14-inches wide and is sold individually.
Fixes these symptoms

General Electric Dishwasher Appliance Types

Related General Electric Dishwasher Parts

Popular General Electric Dishwasher Models