Kenmore Dishwasher Wheels and Rollers

Kenmore Appliance Parts

Popular Kenmore Dishwasher Wheels and Rollers

★★★★★
★★★★★
12 Reviews
Fix Number
FIX3406971
Manufacturer Part Number
W10195416
This OEM gray plastic lower dishrack wheel assembly allows the rack to slide in and out of the dishwasher with ease. It measures roughly 3 by 6 inches. If it breaks or becomes damaged it may make sliding in and out feel difficult. This is a normal wear and tear item and will need to be replaced when this happens. It attaches directly to the dishrack and is a quick and easy repair. There are 4 dishrack wheel assemblies in total on your appliance, so this is a good time to inspect all 4, as this part is sold individually. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Leaking
  • See more...
Lower Dishrack Wheel Assembly
$36.70
In Stock
★★★★★
★★★★★
6 Reviews
Fix Number
FIX11750057
Manufacturer Part Number
WPW10195417
This gray plastic lower dishrack roller is a part for your dishwasher. It attaches to the bottom of the lower dishrack, allowing it to move in and out smoothly. If the lower dishrack stops moving in and out easily or preventing you from being able to shut the dishwasher door, inspect the dishrack roller for damage. The assembly includes 2 rollers and the bracket that attaches to the dishrack (parts are not sold separately). This assembly is sold individually, so you will need 4 assemblies to replace them all in your appliance. For this easy repair, start by removing the lower dishrack from the appliance and set it on the counter. Use a screwdriver to pry off the old roller assembly from the lower tabs. Align the new part on the dishrack by snapping it in place.
Fixes these symptoms
Dishrack Roller - Grey
$11.11
In Stock
★★★★★
★★★★★
3 Reviews
Fix Number
FIX8727387
Manufacturer Part Number
00611475
This part includes one grey plastic wheel with the attachment, designed for your lower dishrack. It allows you to slide the dishrack in and out smoothly. If one of these wheels is missing or damaged, it can make it difficult to slide the rack in and out and can make it impossible to close the dishwasher door. Replacing this part is simple, snap it off the dishrack, and snap the new one into place. Note that each wheel is sold separately, so order accordingly.
Rack Roller Wheel
$10.28
In Stock
Fix Number
FIX8727423
Manufacturer Part Number
00611666
This is a genuine OEM replacement rack roller wheel for the top rack of your dishwasher. If one of your wheels has become damaged, it can make your rack unbalanced and difficult to pull in and out. This can result in dishes not being properly cleaned, or potentially getting damaged. The wheel kit is sold individually and comes with one axle and one roller. Replacing a damaged wheel is an easy repair that does not require any tools, the new part simply clips into place on the rack.
★★★★★
★★★★★
4 Reviews
Fix Number
FIX11726733
Manufacturer Part Number
WD35X21038
The wheels on the lower rack of your dishwasher allow for the rack to slide in and out smoothly. If this is not happening, it may be necessary to replace one or more of the wheels. This kit includes 8 wheels along with 8 axels, both of which are made of white plastic. Replacing a wheel is easy, and just requires a set of pliers. For this repair, you will want to remove the bottom rack from your dishwasher and place it on a solid work surface. Remove the damaged wheels from the rack by unclipping the axel and pulling them off. Insert the new axel into the new wheel pushing firmly until it locks into place. Slide the axel onto the rack, and clip into place. As this kit contains genuine OEM parts, it ensures the parts will be the proper fit for your appliance model.
Fixes these symptoms
Dishwasher Upper Dish Rack Wheel Mount
$25.89
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX11745459
Manufacturer Part Number
WP8268743
The wheel mount for the upper rack of your dishwasher ensures that the top rack easily slides along the track when pulling it in and out. If a wheel or the mount becomes damaged, your top rack will not be balanced and will be difficult to use. This can result in dishes not being cleaned properly or even becoming damaged. There are two different wheel mounts per each side of the top rack, located in the middle and back of the rack. This part is sold individually and is interchangeable for which side it is used on. If you need to replace more than one wheel mount, please be sure to order the correct quantity. The mount simply slides onto the rack and then clips into place, but a flat head screwdriver may be required to remove the rail stops in order to take the top rack out of the dishwasher.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Noisy
  • See more...
★★★★★
★★★★★
2 Reviews
Fix Number
FIX11745451
Manufacturer Part Number
WP8268655
If the top rack of your dishwasher is no long sliding in and out smoothly, you may need to replace one of the wheels. This genuine OEM parts assembly includes the wheel, the mount, the axel, and the clip. They are sold individually, and most dishwasher top racks have four wheel-mounts in total. If you need to replace more than one wheel, be sure to add the correct quantity to your cart. Replacing these are an easy repair and does not require any tools, simply pop off the broken wheel mount and snap the new one into place.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Noisy
  • See more...
Rack Adjuster
$11.09
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11750255
Manufacturer Part Number
WPW10204131
This is a genuine OEM replacement rack adjuster for your dishwasher. If this part is damaged, broken, or missing it may cause issues using the top rack properly. To replace this part, first remove the top rack from your dishwasher, by removing the rack stop clips from the ends of the rails. To release the tabs, you can either use your fingers or a flat blade screwdriver to depress the locking tabs. Once the top rack has been removed and placed on a suitable work surface, the defective rack adjuster can be removed, once again using either your fingers or screwdriver to disengage the tabs. The new rack adjuster can then be snapped into place.
Fix Number
FIX11745525
Manufacturer Part Number
WP8270019
If you are unable to smoothly roll the top dish rack of your dishwasher, you may need to replace some of the wheel assemblies. Over time they can become cracked and damaged, and once this happens, they no longer glide smoothly along the rails. If you need a replacement, this is a genuine OEM wheel and mount assembly for the upper rack in your dishwasher. Please note that they are sold individually, so if you need to replace more than one wheel assembly, be sure to add the correct quantity to your cart.
Fixes these symptoms
Dishwasher Upper Rack Roller
$24.89
In Stock
Fix Number
FIX11753471
Manufacturer Part Number
WPW10350401
If the upper rack of your dishwasher has become difficult to roll in and out, or it keeps getting jammed, you may need to replace one or more wheels. Over time the plastic can become brittle, or deteriorate from the soap and chemicals in the dishwasher. If you need to replace a wheel, this is a genuine OEM part. Please note that they are sold individually, so if more than one wheel needs to be replaced be sure to order the correct quantity. To change out a wheel, you will need to remove the top rack from the dishwasher by removing the rail stop clips. Place the rack on a suitable work surface, and use a flat blade screwdriver to pop open the tabs holding the wheel mount in place.
Fixes these symptoms

Related Kenmore Dishwasher Parts