Official Kenmore Dishwasher Hinges

Door Balance Link Kit

$33.09

Fix Number: FIX972325
Manufacturer Part Number: 8194001

If your dishwasher door is not opening or closing properly, it may be time to install a new balance kit. This part helps to support the weight of the door as it opens and closes. You should also check on the condition of the door springs as well, as they work with the balance kit and may also need to be replaced when you do this repair. This genuine OEM parts kit includes two door balance links and two door balance mounts with wheels, which will replace both the left and righthand sides. If you do need to replace the springs, please note that these are sold separately and are not part of this kit. Installing the parts is a simple job, however you will need access to both sides of your dishwasher. This will require pulling it out from under your counter or cabinets. You will need a 5/16 nut driver to remove and replace the new balance mounts, and you may need a Philips screwdriver to remove the mounting hardware in order to pull your dishwasher out to work on. This kit can also be known as a door spring cable kit, or the door cable kit.

Fixes these symptoms

Door latch failure
Door won’t close
Leaking
See more...

Hinge Cable

$17.88

★★★★★

2 Reviews

Fix Number: FIX3524406
Manufacturer Part Number: 4933DD3001B

If the door to your dishwasher drops suddenly when opening, there may be an issue with your connector assembly. It works by connecting the door hinge to the door spring, which applies tension and prevents the door from dropping quickly. To replace this part, you will need to pull the dishwasher out from under the cabinet in order to access the spring. This part is sold individually, but you may want to consider replacing both the right and left-hand side connector assemblies, as they can wear at similar rates. This genuine OEM part has a black plastic portion on each end of a white rope that measures approximately 12-inches in length.

Fixes these symptoms

Door latch failure
Door won’t close
See more...

Watch the install video

Friction Sleeve

$7.49

★★★★★

3 Reviews

Fix Number: FIX11745488
Manufacturer Part Number: WP8268961

The friction sleeve, sometimes called a friction pad, is made of a flexible black plastic and measures a bit over one inch in length. It is designed to reduce the friction between the hinge and the door on your dishwasher, and helps keep it quiet when the door opens and closes. If the door to your dishwasher drops quickly when unlatched, you may need a new friction sleeve. The sleeve is sold individually however there is one located on both the left and right side of the dishwasher. We recommend replacing them at the same time so that they wear evenly. Replacing this genuine OEM part is an easy repair, but it will require you to pull the dishwasher out from under the counter.

Fixes these symptoms

Door latch failure
Door won’t close
Noisy
See more...

Watch the install video

Hinge Arm Link

$8.54

★★★★★

1 Review

Fix Number: FIX259336
Manufacturer Part Number: WD14X10009

The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In this case, you will need to replace the hinge link. Pull out your dishwasher to inspect the hinge and spring, if the link is broken, it may be disconnected and on the ground already. If not, you can remove the hinge arm link by simply disconnecting it from the hinge and spring, then replacing it with the new part. The hinge arm link is a small piece of white plastic about an inch and a half long. It is sold individually, and is an OEM part from the manufacturer.

Fixes these symptoms