Official Kenmore Dishwasher Racks

Watch the install video

$45.52

Dishwasher Dish Rack Adjuster Kit - Left and Right Side

★★★★★

42 Reviews

Fix Number FIX10064063

Manufacturer Part Number W10712394

This rack adjuster kit is connected to the dishrack and allows you to adjust the height of the upper rack of your dishwasher up and down to give more space. The kit is constructed of gray plastic and metal, and measures approximately 12 inches wide and 6.5 inches tall. This kit includes 2 adjuster arms, 2 adjuster actuators, 2 gray adjuster covers, 2 gray adjuster housings, and 4 screws. The rack adjuster can break from material fatigue or prolonged high temperature exposure, compromising the integrity of the materials. The most common indicators of a faulty rack adjuster include leaking, door latch failure, the door not closing, dishes not cleaning properly, and failure to start the wash cycle. This kit includes the parts to replace the left and right-side rack adjusters and has been upgraded to a more durable metal design. Replacing this part requires beginner repair experience, basic hand tools, and some disassembly of the dishwasher. Do not forget to unplug the dishwasher or shut off the water supply to the appliance underneath the sink before you begin.

Fixes these symptoms

Door latch failure
Door won’t close
Leaking
See more...

Watch the install video

$132.21

Lower Dishrack Assembly

★★★★★

2 Reviews

Fix Number FIX9494212

Manufacturer Part Number 808602402

Wheels are included. This lower dishrack assembly comes with 8 rollers enabling it to roll in and out with ease. The dishrack is approximately 22 inches long x 20 inches wide. The dishrack holds dishes in place during the dishwashing cycle. If you see rust spots on the dishes, the lower rack will not pull out, or the lower rack is visibly rusted or damaged, the part should be replaced. Other common symptoms include: unusual or loud noises coming from the unit, or the dishes on the lower rack not being washed properly. This part is also known as a dish rack or a dishwasher rack.

$5.41

Tine Holder

Fix Number FIX8712513

Manufacturer Part Number 00418498

This tine hold is a genuine OEM replacement part for your dishwasher, measuring approximately 1 inch long and is sold individually. This part is also known as a tine clip or a rack flip tine clip. It is used to the hold the tines of your dishrack in place. Once you have adjusted the tine racks to a position that works with your dishes, this clip will hold the tines in place and is designed to hold two rows. There are no tools required to install a new clip, but a flathead screwdriver may be needed to remove the old one. The new clip just snaps onto the dishrack, and you can then adjust and hold the tines in place.

Watch the install video

$200.45

Dishwasher Lower Dish rack with Wheels

★★★★★

1 Review

Fix Number FIX3486947

Manufacturer Part Number WD28X10284

This is a manufacturer-approved lower dish rack with six wheels and supports. The lower dish rack is where dishes are placed in the bottom portion of the dishwasher to be cleaned during the wash cycle. It is commonly replaced because it is rusty or starting to corrode, which can cause spots on your dishes. For this simple, tool-free repair, start by opening the dishwasher door, pulling out the old lower dish rack assembly, removing the silverware basket, and lifting the assembly up and out of the unit. Slide the new part into place, put the silverware basket back on the rack, and close the dishwasher door.

Fixes these symptoms

Not cleaning dishes properly
See more...

$150.28

Upper Dishrack with Wheels

Fix Number FIX2379463

Manufacturer Part Number 5304475618

This dish rack includes the wheels. It is used in the dishwasher.

Watch the install video

$248.49

Lower Dishrack

★★★★★

3 Reviews

Fix Number FIX10057160

Manufacturer Part Number W10728159

If you need a new lower dishrack for your dishwasher, this is a genuine OEM replacement part. The rack is gray in color and is used to hold your dishes in place while the appliance is operating. Please note that just the rack is included. You can use the rollers and utensil holders from your old rack on the new one.

Watch the install video

$126.34

Upper Rack Assembly - T3 PRO

Fix Number FIX10065024

Manufacturer Part Number A01986801

Upper Rack Assembly - T3 PRO. This is the complete upper rack and the wash arm.

Fixes these symptoms

Leaking
Not cleaning dishes properly
See more...

Watch the install video

$45.96

Tine Row - Kit of 2

Fix Number FIX10057154

Manufacturer Part Number W10727426

This tine row is for the top rack of your dishwasher, and prevents cups, dishes, and other items from moving around during the cycle. If your current row is missing one or more tines, or the tines have become corroded and are leaving marks on your dishes, you may want to consider replacing it. To do so, simply snap off the tine row pivots that hold the tine row in place, and remove the existing tine row. Then, simply replace it with the new tine row, and snap the tine row pivots back into place. When you order this part, it will come with a set of 2 tine rows. This is an OEM part sourced directly from the manufacturer.