Official Kenmore Dishwasher Brackets and Flanges

Dishwasher Mounting Bracket

$14.61

Fix Number: FIX11745496
Manufacturer Part Number: WP8269145

The mounting bracket is used to secure the top part of your dishwasher to the underside of your counter or cabinet. If you have solid surface counters (granite, quartz, etc.) you will likely need to side mount your appliance, and this type of bracket is sold separately. It is important to properly secure your dishwasher, as it helps to keep it level, and prevents it from moving, shaking, or tilting forwards. This is an authentic OEM part, made entirely of metal, and approximately 3 inches in length. These mounting brackets are sold individually, however most dishwashers require at least two brackets to secure the appliance to the countertop. It is recommended to check and replace all brackets at the same time, as they tend to wear at the same rate. Attaching the mounting bracket to the top of the dishwasher is simple, and just requires a pair of needle nose pliers to bend the tabs into place. When it comes time to attach your dishwasher to the countertop, please note that you will need screws (sold separately), a screwdriver, and if this is the first time the brackets are being attached, you will also need to use a drill bit to make pilot holes for the screws.

Fixes these symptoms

Door latch failure
Door won’t close
Leaking
See more...

Gasket

$62.98

★★★★★

1 Review

Fix Number: FIX17267570
Manufacturer Part Number: 3920DD3005H

This rubber door gasket creates a watertight seal around the dishwasher tub, helping prevent leaks and improve wash performance. Made from heat-resistant material, it’s built to last and withstand regular use. Replacing a worn gasket can resolve issues like water pooling and inefficient cleaning. Installation involves pressing the gasket into the door channel for a secure fit.

Fixes these symptoms

Leaking
See more...

Watch the install video

Tine Bracket

$34.95

Fix Number: FIX975905
Manufacturer Part Number: 154428402

This is a bracket, but it may also be known as a dishrack row clip, or simply a tine clip, and it is used in conjunction with your dishwasher. The purpose of this part is to fasten to the rack and the tine row. This will give the tine the stability it needs to hold your glasses and bowls by firmly attaching to the rack. You will not need any tools to make this repair. This piece is sold individually, measures to be about 2 inches by 1 inch, and is gray in color.

Mounting Bracket

$10.12

Fix Number: FIX8728568
Manufacturer Part Number: 00619985

This is an authentic metal mounting bracket for a dishwasher, sold individually. The purpose of this part is to secure the top of the dishwasher to the bottom of your counter. If there is no way to mount the dishwasher to the countertop itself, this bracket can also be used to mount a dishwasher onto the side of the cabinet. Over time this part will wear or damage, and this will cause the dishwasher to lose stability in the counter. Please note that the dishwasher will need to be moved out of the cabinet to install this part.

Fixes these symptoms

Door latch failure
See more...

Tine Bracket

$12.95

Fix Number: FIX11770479
Manufacturer Part Number: 5304506508

This bracket is designed for use in dishwashers, and it is a genuine replacement part. It is used in the upper dishrack to hold tines in place. This part is made out of plastic. Please note it is sold individually, therefore you will need to order the quantity you require. NOTE: This part has been updated by the manufacture but will still work like the original.

Watch the install video

Side Mounting Bracket Kit

$27.18

Fix Number: FIX1487167
Manufacturer Part Number: 8212560

This mounting kit can be used on solid surface countertops.

Fixes these symptoms

Door won’t close
See more...

GUIDE

$17.58

Fix Number: FIX8728859
Manufacturer Part Number: 00623536

This dishwasher door cable guide helps ensure the door opens and closes smoothly by directing the movement of the door cable and spring assembly, keeping the door properly balanced during use. Sold as a left-and-right set, these durable plastic guides prevent the door from feeling heavy, sticking, or making unusual noises when the original components become worn or damaged. Replacing faulty guides helps restore proper door operation and prevents strain on other door-support parts. Installation typically involves accessing the side panel area, removing the worn guides, and snapping the new pieces into place to maintain smooth, controlled door movement.

Fixes these symptoms

Door latch failure
Door won’t close
See more...

Circulation Pump Motor Bracket

$11.95

Fix Number: FIX17219471
Manufacturer Part Number: 5304534830

Fixes these symptoms

Leaking
See more...

Tub Gasket

$51.57

Fix Number: FIX12579179
Manufacturer Part Number: 3920DD3005F

Prevent leaks and maintain efficient cleaning with this durable dishwasher door gasket, designed to create a watertight seal around the door during operation. Made from high-quality, flexible rubber for long-lasting performance, this genuine replacement part is ideal for fixing issues such as water leaking from the bottom or sides of the door. Installation is simple—just remove the old gasket and press the new one into place following your appliance’s instructions.

Fixes these symptoms

Leaking
See more...

BRACKET

$21.89

Fix Number: FIX11727941
Manufacturer Part Number: W10837623

Fixes these symptoms

Not cleaning dishes properly
See more...

Kenmore Dishwasher Brackets and Flanges

Popular Kenmore Dishwasher Brackets and Flanges

Related Kenmore Dishwasher Parts

Kenmore Dishwasher Brackets and Flanges

Start With Your Model Number

Popular Kenmore Dishwasher Brackets and Flanges

Related Kenmore Dishwasher Parts