Official Kenmore Dishwasher Spray Arms

Lower Spray Arm

$40.95

Fix Number: FIX12585623
Manufacturer Part Number: 5304517203

This is a single lower spray arm found in dishwashers to spray water and detergent vigorously over the dishes. This spray arm is made of plastic, so can warp or crack with time. The holes in the spray arm can get clogged with debris, so it should be cleaned every so often. If it is beyond cleaning or damaged, it will need to be replaced. If the holes are clogged, this can sometimes mean there is a problem with the filter system, so it is a good idea to inspect this as well. For this repair, start by turning off the water supply to the dishwasher. Pull the lower rack out of the dishwasher and out of the way. Remove the lower wash arm. Using a flathead screwdriver, push the small locking tabs located on each side at the bottom of the spray arm. You should now be able to easily pull the spray arm out of the dishwasher. Align the new lower wash arm and push it down to secure it in place. Make sure it can spin freely and is not making contact with the heating element. Place the lower dishrack back into the appliance and close the door.

Fixes these symptoms

Door latch failure
Leaking
Noisy
See more...

Lower Spray Arm

$41.95

★★★★★

2 Reviews

Fix Number: FIX12705424
Manufacturer Part Number: 5304518927

If the Spray Arm in the bottom of your dishwasher becomes damaged or broken, it is important to replace it as soon as possible. Broken spray arms can result in your dishes not being cleaned properly, or cause water to leak onto your floors while running. Damage commonly occurs due to the spray arm melting; it can come loose during the wash cycle, and rests against the heating element. The plastic then melts, and the arm either does not fit back into place or the holes become distorted which causes water to spray in different directions. Replacing this part is easy, and tools should not be required. First remove the lower dish rack to access the spray arm, pull out the broken piece, and pop the new one into place. Once you put the dish rack back in, you will be ready to go! Spray arms for the upper rack are sold separately.

Fixes these symptoms

Leaking
Noisy
Not cleaning dishes properly
See more...

Watch the install video

Dishwasher Lower Spray Arm

$41.95

★★★★★

1 Review

Fix Number: FIX11755592
Manufacturer Part Number: WPW10491331

This is a lower spray arm for a dishwasher. The lower spray arm allows water to be spread evenly throughout the dishwasher tub with the proper force so dishes come out clean. This spray arm is gray in color and is about 20 inches long. You may need to replace this part if the water is not being distributed.

Fixes these symptoms

Leaking
Noisy
Not cleaning dishes properly
See more...

Watch the install video

Middle Spray Arm Kit

$32.86

★★★★★

3 Reviews

Fix Number: FIX382824
Manufacturer Part Number: 675808

The spray arm works by rotating to distribute water throughout the dishwasher, ensuring that both racks of dishes come out clean. If your dishes are not coming out of the dishwasher as clean as they should be, it may be time to replace the spray arm in your appliance. This kit comes with the upper spray arm, split ring seal, water supply tube, a holder for the tube, and a screw to attach the arm to the mounting bracket. The kit has been redesigned by the manufacturer and no longer includes the upper support or mount, and the supply tube now comes as one piece. If your repair also requires a new mounting bracket, this part can be ordered separately. As this is a genuine OEM parts kit, it is guaranteed to work with your model number. This repair is easy to complete and only requires the use of a Philips screwdriver. The spray arm measures approximately 18 inches long, and all components of the kit are white in color.

Fixes these symptoms

Door won’t close
Leaking
Noisy
See more...

Middle Spray Arm

$40.95

Fix Number: FIX11755664
Manufacturer Part Number: WPW10498900

Enhance the efficiency of your Whirlpool dishwasher with this top-quality spray arm. This essential part rotates and sprays water effectively to clean the dishes inside the dishwasher tub, providing a thorough and comprehensive cleaning. Durably constructed, it stands up to regular use and ensures a lasting performance. Keep in mind, it's advised to wear work gloves in order to protect your hands while handling the repair. Invest in this Whirlpool spray arm for an unmatched cleanliness standard.

Fixes these symptoms

Leaking
Not cleaning dishes properly
See more...

Watch the install video

Dishwasher Upper Spray Arm Mount

$8.95

★★★★★

1 Review

Fix Number: FIX11746245
Manufacturer Part Number: WP8539324

This genuine OEM upper spray arm mount is used to hold the spray arm to the top rack in your dishwasher. This part is made of plastic and has been redesigned by the manufactured so it may look different than the part you are replacing. This new version no longer needs to be screwed onto the top rack, it simply clips into place. To do this repair, you will need to remove the rack from the dishwasher by removing the rail stop clips. Once the top rack is on a suitable work surface, you will need a Philips screwdriver in order to remove the spray arm and the old, damaged mounting bracket. Once the new mount has been snapped into place, you can reinstall the other parts and place the rack back into your dishwasher.

Fixes these symptoms

Door won’t close
Leaking
Noisy
See more...

Watch the install video

Upper Spray Arm

$31.95

★★★★★

2 Reviews

Fix Number: FIX11770483
Manufacturer Part Number: 5304506516

The upper spray arm is found above the top rack in your dishwasher. If your dishes are not properly cleaned after the cycle has finished, the spray arm may need to be replaced. As the part is made of plastic, it can crack or disintegrate over time. Replacing this OEM part is a simple repair that does not require any tools. Remove the rail stop clips from the top rack rails, and then remove the top rack from the dishwasher. With the rack out of the way you will be able to access the upper spray arm. Unthread the nut holding the spray arm to the ceiling of the dishwasher, and remove the damaged spray arm. Line up the new spray arm, and begin to thread the part onto the inlet tube. The nut should be firmly tightened so that there are no leaks, and the spray arm should be able to spin freely. The top rack can be placed back inside the dishwasher, and the rail stops reattached.

Fixes these symptoms

Leaking
Noisy
Not cleaning dishes properly
See more...

Watch the install video

Dishwasher Lower Spray Arm Nut

$10.42

Fix Number: FIX11745480
Manufacturer Part Number: WP8268873

This genuine OEM nut is used to hold the lower spray arm in place. The lower spray arm is found at the bottom of the dishwasher, and you will need to remove the bottom dish rack in order to replace the nut. Some signs that you may need to replace this part are if the spray arm is coming loose or falling off, or if the nut is missing or damaged. No tools are required to replace the part. If the old nut is still in place, simply twist it counterclockwise to remove it then twist the new one into place.

Fixes these symptoms

Leaking
Noisy
Not cleaning dishes properly
See more...

Watch the install video

Manifold

$72.95

Fix Number: FIX11753224
Manufacturer Part Number: WPW10340542

This water supply manifold is a key component in your dishwasher’s cleaning system, responsible for channeling water from the main supply line to the spray arms. Mounted to the upper rack, it ensures water is evenly distributed throughout the interior, helping to achieve consistent and thorough cleaning results. If the manifold is cracked, clogged, or no longer functioning properly, you may notice poor cleaning performance, water leaks, or interrupted cycles. Replacing a damaged manifold can restore your dishwasher’s efficiency and reliability. Be sure to check compatibility with your specific model before installation to ensure a proper fit.

Fixes these symptoms

Not cleaning dishes properly
See more...

Watch the install video

Lower Sprayarm Seal

$12.51

★★★★★

1 Review

Fix Number: FIX11741334
Manufacturer Part Number: WP3376846

This genuine OEM seal fits under the lower spray arm in your dishwasher. It is also known as a bearing ring and is used to create a seal between the spray arm and the sump housing. The part measures approximately 2 inches in diameter, is made of a white plastic, and has been purposely designed with the split in the ring. No tools are required to replace the seal, simply remove the lower rack in the dishwasher and unscrew the nut holding the lower spray arm in place.

Fixes these symptoms

Leaking
Noisy
Not cleaning dishes properly
See more...

Kenmore Dishwasher Spray Arms

Popular Kenmore Dishwasher Spray Arms

Related Kenmore Dishwasher Parts

Kenmore Dishwasher Spray Arms

Start With Your Model Number

Popular Kenmore Dishwasher Spray Arms

Related Kenmore Dishwasher Parts