Amana Dishwasher Wheels and Rollers

Dishwasher Lower Dishrack Wheel Assembly - Gray

★★★★★

★★★★★

(12)

This OEM gray plastic lower dishrack wheel assembly allows the rack to slide in and out of the dishwasher with ease. It measures roughly 3 by 6 inches. If it breaks or becomes damaged it may make sliding in and out feel difficult. This is a normal wear and tear item and will need to be replaced when this happens. It attaches directly to the dishrack and is a quick and easy repair. There are 4 dishrack wheel assemblies in total on your appliance, so this is a good time to inspect all 4, as this part is sold individually. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel.

Rack Adjuster

★★★★★

★★★★★

(1)

This is a genuine OEM replacement rack adjuster for your dishwasher. If this part is damaged, broken, or missing it may cause issues using the top rack properly. To replace this part, first remove the top rack from your dishwasher, by removing the rack stop clips from the ends of the rails. To release the tabs, you can either use your fingers or a flat blade screwdriver to depress the locking tabs. Once the top rack has been removed and placed on a suitable work surface, the defective rack adjuster can be removed, once again using either your fingers or screwdriver to disengage the tabs. The new rack adjuster can then be snapped into place.

Lower Wheel Assembly This is a genuine OEM replacement lower wheel and axle assembly for the bottom rack in your dishwasher. The wheel is gray in color, is made of plastic, and measures approximately 1.75 inches in diameter. This part is sold individually so if you need to replace more than one wheel, be sure to order the appropriate quantity. Replacing this part is a very simple task that does not require any tools. Simply remove the empty rack from the bottom of the dishwasher and place it on a suitable work surface. Remove the damaged wheel, and snap the new one into place. The rack can be placed back into the dishwasher, where it should now easily glide in and out.

Upper Rack Wheel with Mount

★★★★★

★★★★★

(2)

If the top rack of your dishwasher is no long sliding in and out smoothly, you may need to replace one of the wheels. This genuine OEM parts assembly includes the wheel, the mount, the axel, and the clip. They are sold individually, and most dishwasher top racks have four wheel-mounts in total. If you need to replace more than one wheel, be sure to add the correct quantity to your cart. Replacing these are an easy repair and does not require any tools, simply pop off the broken wheel mount and snap the new one into place.

Upper Rack Wheel This is a single upper dishrack and roller assembly with an integrated clip-on axle in gray. This part attaches to the dishrack and makes it possible to slide the dishrack in and out of the dishwasher with ease. It is commonly replaced because the dishrack can not be pulled out or pushed back in. This part is sourced directly from the original manufacturer, ensuring the proper fit and function for your dishwasher.

Lower Wheel Assembly The rollers on the lower rack in your dishwasher allow the rack to smoothly roll in and out of the appliance. If a roller wheel has become damaged or broken off, it should be replaced so that the rack can continue to glide easily. This genuine OEM part is made of white plastic and includes both the wheel and axel as an assembly, and they are sold as individual units. The rollers in your dishwasher tend to wear at the same rate, so we do recommend replacing all wheels on your lower dish rack at the same time. No tools should be required to do this repair, the old wheel pops off the rack and the new wheel snaps into place.

Dishrack Roller Assembly

Wheel Assembly Sold Individually - 4 required on rack.

White Dishrack Roller This upper dishwasher dishrack roller is just over an inch in diameter. It is all white in color and is made entirely of plastic.

Lower Front Dishrack Wheel This wheel is located on the front lower rack. It includes the axle. Sold individually.