Gibson Parts

Light Bulb Clear, 120 Volt, 40 Watt.

Drip Bowl - 8"

★★★★★

★★★★★

1 Review

This OEM drip bowl fits under 8-inch burner elements and has a diameter of approximately 10-inches. Drip bowls catch any spills, and are a quick, easy, and cheap way to improve your cooktop aesthetic. While the replacement may be visually different from the original, it will fit your appliance. If your drip bowl has become discolored, corroded, or otherwise damaged, it needs to be replaced. This drip bowl is sold individually, so if you would like to replace all 4 drip bowls on your appliance you will need to account for this. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place.

Oven Bake Element

★★★★★

★★★★★

10 Reviews

This genuine OEM bake element is located on the bottom of the oven cavity to supply heat for baking. The approximate size is 19-1/2 inches wide by 18-1/2 inches long and has 3-1/2 inch inserts. The element terminals are male quarter inch spade connectors and have push-on wire terminals. If your oven is not heating evenly, the element will not heat, or there is little to no heat when baking, you may need to replace the element. Please remember to disconnect the power to your oven before you start your repair. Next, remove the 2 screws securing the old element, pull it out, and discard. Connect the new element prongs where the old element fit and screw it back in place. This is a very simple repair that anyone can do.

Chrome Drip Bowl - 6"

★★★★★

★★★★★

2 Reviews

This drip bowl is an OEM approved replacement part designed for use with various electric ranges and cooktops. This part is located underneath the burner to contain any spills while cooking. It fits under 6-inch burner elements and has a diameter of approximately 8-inches. While the replacement may be visually different from the original, if you have used your correct model number to search, this will fit your appliance. Common reasons to replace this often neglected part is if it has become discolored, corroded, or otherwise damaged. Each drip bowl is sold individually. This is a good time to inspect all drip bowls on the appliance, if you would like to give your appliance a fresh look, keeping in mind that they may be different sizes and are sold separately. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place.

Terminal Block Kit This kit comes with the necessary components to replace your burner terminal block. It includes interchangeable mounting brackets, a terminal box, ceramic wire nuts, heat shrink protective tubing, and wires. The purpose of this part is to connect the wire harness to the surface element, which allows for the burners to heat up. Some common issues that result from a damaged terminal block is that your element will not heat properly or not heat up at all, may cause burning smell, or make a buzzing noise. If you remove the element and the tips are black, that is a good sign there is a problem with the terminal block and it should be replaced. It may also be necessary to replace the burner elements as well, if the tips are badly damaged. This repair will require a pair of wire strippers, a #1 square head screwdriver, and a heat gun or hair dryer. If you are not comfortable with cutting, stripping, and reconnecting of wires you should contact a qualified professional to complete this repair. Please be sure to disconnect the power supply to your appliance before starting this repair. As this is a genuine OEM parts kit, it will be compatible with your appliance model.

Refrigerator Door Shelf Retainer Bin

★★★★★

★★★★★

5 Reviews

If the middle shelf on your refrigerator door is damaged, this is the OEM replacement part needed. Door shelves are great for organizing items in your appliance such as jars, containers, and condiments, and if broken can prevent the door from properly opening and closing. This white, plastic door shelf has open square larches and measures roughly 24-1/4 inches wide and 3-3/4 inches deep. This low effort repair requires very little time and zero tools. Fasten it directly to the door by sliding it in place, and your repair is complete.

Defrost Timer - 60Hz 120V If your freezer will not defrost, or your fridge and freezer are too warm, there may be an issue with the defrost timer. This device helps to melt ice that builds up on the evaporator coils. It does this by cycling on the heater circuit for thirty minutes after every eight hours that the compressor has been running. There is also a dial on the timer that can be advanced in and out of defrost mode if you need to adjust things manually. If frost is allowed to build up, it can reduce airflow and the efficiency of your appliance. If you need to replace the defrost timer, this is an authentic OEM part. It measures approximately 3 inches long and 2.5 inches wide, with 60Hz and 120V. Please be sure to disconnect the power supply to your fridge before beginning this repair.

Freezer Door Key

★★★★★

★★★★★

1 Review

This is a genuine OEM replacement key for the door of upright or chest freezers. If you have misplaced or damaged your key, you will need a replacement in order to lock and unlock your freezer door. We recommend storing the key in a safe place away from the freezer itself. We recommend testing the new key with the freezer door open, to ensure that the latch opens and closes properly. This key is made from white plastic and is sold individually.

Refrigerator Door Shelf Bin

★★★★★

★★★★★

3 Reviews

This easy-to-install refrigerator door shelf bin is used to hold products inside your refrigerator. It is sold individually. This shelf attaches to the door and is designed for the upper shelf. This white plastic shelf bin is approximately 26-inches wide, just over 4-inches tall and 7-inches deep. This shelf is prone to wear and tear over the lifetime of the appliance and will need to be replaced when it appears damaged, cracked, or warped. This is a quick and easy repair that only requires you disengage the old shelf with your hands and snap the new one into place.

Refrigerator Door Shelf Bin

★★★★★

★★★★★

3 Reviews

This is a white plastic door shelf bin for your refrigerator. It is attached to the inside bottom of the refrigerator door shelf where it helps to contain items such as jars and condiments. This part can break or warp over time and will need to be replaced. It measures roughly 24-3/4 inches wide by 3.4 inches tall. This is a quick and easy installation, not requiring any tools. Simply snap it in place on the mounting tabs. This is an OEM part that is sold individually.