Have you ever purchased from us before?
Thank you for helping make our site better.
Manufacturer #: 240534901 /
Manufactured by: Frigidaire /
Fix #: FIX734935
Manufacturer #: 240534901 |
Manufactured by: Frigidaire |
Fix #: FIX734935
Slide out broken bar & slide in new one. If you're really mechanically inept, it might take you 15 seconds.
Were these instructions helpful?
PartSelect made it SO very easy. Ordered, fast shipment, received and straight out of the box just snapped the new bars into place. Really appreciate your site and service. Will recommend you highly! Thanks
I took the shelf retainer bar out of the shipping box, looked at the middle shelf to see how the bar sits on the brackets, and put it on. Took about 2 minutes. No tools needed. Done! Easy peasy!
TOO THE OLD ONES OUT AND SNAPPED THE TWO NEW ONES IN.
Appliance came with purchase of property. These parts were broken and duct taped. The door support rail was a simple snap-in install, however the drawer support rail involved removing the glass shelf to remove the (old) broken one, retain the screw as the "Kit" did not include a new one, and to difficult part was the glass shelf kept falling out of the support rails, as it required an angle to reinstall. also required significant cleaning inside the plastic rails.
1. Open box and pull out part. 2. Open refrigerator door. 3. Put part in place on inside of door.
Put the shelf in the slots and pushed it in place. It took about 5 seconds to install.
I popped off the old one and pressed the new one in place until it clicked.
Soo easy ! Just pop out broken shelf and snap in new one
Just snapped in place
Does bread last longer in the fridge? Can you cut raw meat on woo…