Frigidaire/Frigidaire_Thumb/1Y86I1UE.gif
See part 49 in the diagram
Replacing your Frigidaire Dishwasher Dishwasher Bottom Door Gasket play video
( Grid squares measure 1x1 inch )

Dishwasher Bottom Door Gasket

★★★★★
★★★★★
2 Reviews
$28.72
Fix Number: FIX9495545
Manufacturer #: 809006501
Manufactured by: Frigidaire

Product Description

This dishwasher door gasket is attached to the bottom of the door, creating a strong seal between the tub and the outer edge of the door. This seal is prone to wear and tear due to its constant exposure to water, detergent, and food particles. If the gasket appears cracked, broken, or you notice a leak coming from the door, it will need to be replaced immediately. This gasket measures approximately 23 inches long. For this simple repair, no tools are necessary. Open the dishwasher door and remove the bottom rack. The gasket is located right along the bottom of the door, molded inside the channel. It is held in place in the groove across the bottom. Remove the old gasket by pulling it out with your hands. Take your new silicone gasket and line it up so the notch fits into the groove and slide it in place until it is secure. Reinstall the lower dishrack. We recommend leaving the door closed for a few hours to ensure the gasket is sealed tightly.

Videos For installing this part.

Replacing your Dishwasher Bottom Door Gasket

Replacing your Dishwasher Bottom Door Gasket play video
Questions and Answers

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

5 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Peg
January 19, 2022
Good for model FGHD2465NF1A. Serial Th41755345 Frigidaire Gallery
For model number FGHD2465NF1A
Hello Peg, Thank you for contacting us. We have researched the model you have provided and can confirm the part you are looking for is Fix Number: FIX9495545. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Maureen
August 18, 2022
when I put in the lower door seal in it goes right thru the channel..everything lines up just fine..it just falls right thru..any help...?
For model number FDB1050REC0
Hello Maureen, Thank you for the question. We suggest checking the Channel that the gasket slides into and check to make sure it is not warped and able to hold the gasket in place. We hope this helps!

Was this helpful?
Thank you for voting!
Dan
25 days ago
I replaced the bottom door seal but the seal doesn’t stay when opening and closing the door
For model number FRIG2466QFA
Hi Dan, thank you for contacting us. If dirt or debris is preventing your dishwasher door seal from sealing properly, we suggest that you clean it thoroughly. Use warm soapy water and a soft cloth to wipe the seal and the surface and put the seal back. We hope this helps!

Was this helpful?
Thank you for voting!
Jon
February 15, 2022
Bottom dishwasher door seal...parts don't look like mine
For model number 665 .13223n414
Hi Jon, Thank you for your question. The part number listed under your model number for the lower door seal is FIX11766757. If you would like to place an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Jerry
December 5, 2021
Need lower door seal
For model number Kenmore 665.13204n412
Hello Jerry, Thank you for your inquiry. We have researched the model number you have provided and show that the bottom door seal is only available as part of the inner door panel. We hope this helps.

Was this helpful?
Thank you for voting!
Related Parts:

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.4 / 5.0, 31 reviews.
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Everette from Hardyville, VA
  • Parts Used:
    809006501
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Dishwasher leaking around bottom of door
Watched the video, easy replacement.
15 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Patrick from Pleasanton, CA
  • Parts Used:
    809006501, 154827601, 154637401
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers
leak from door
I ordered the top 3 parts in terms of probability of solving the problem (water inlet valve, tub gasket, and bottom door gasket). I installed all 3 and it did not solve the door leak. Then I realized that the bottom door gasket had come out (in other words, I had not installed it properly). I reinstalled the bottom door gasket (a critical point is that it has to be *pressed in* firmly -- there should be some resistance), and it worked. Note that the bottom door gasket is a hybrid between a true seal and a splash guard. The notch in the middle is designed to drain water from the door back into the tub. Because of that notch opening, there is sputtering and splashing at various points of the wash cycle. This appears to be by design, and those splashes result in water being absorbed by the insulating foam. Thank you to the previous submission/posting authors, as this is what clued me in.
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Rodger from Randolph, NJ
  • Parts Used:
    809006501
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
Water leaking out door of dishwasher.
Opened plastic package with scissors. Opened door of dish washer. At bottom of door pulled gripped old gasket seal with plyers and pulled it out of slot. Pushed new gasket in place...too long. Marked extra length with sharpy black pen and removed gasket. Cut gasket with scissors and pushed it into slot. Fit perfect. Note slot us under lip of door, a little tricky to find in order to install. Works great, no more leak.Make sure you use a screw driver on the door screws to make sure they are all tight. Too seal them use Blue Lock tight sealer.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Kim from North Ridgeville, OH
  • Parts Used:
    809006501, 154827601
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Water leaking at bottom of door
I watched the video. It was very easy to follow and was able to get both installed in total of about 15 mins.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Robert from South Deerfield, MA
  • Parts Used:
    809006501, 154827601
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Dishwasher was leaking.
Replaced tub gasket and door seal just like the video shows. Was very easy.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Jennifer from Petersburg, PA
  • Parts Used:
    809006501
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Leaking out the front door
The old gasket was easy to pull out. I didn't get the new one in straight the first time and closing the door was difficult. The new gasket popped out and I got it lined up better and pushed it back in. Tested the seal by running the rinse cycle and no leaking!
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Noreen from Nyack, NY
  • Parts Used:
    809006501
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
My dishwasher wa leaking from the bottom.
I watched the video that you provided and I proceeded to follow the directions and install the gasket. Very easy once my husband stopped interfering.However , the bad news was that the leak was not fixed. There is a much bigger leak that seems to spray water from somewhere on the bottom, towards the center/rear of the machine. I can't get a handle on the exact part without pulling the entire machine out, which is complicated because of the manner in which it was installed. So, if I decide to take it on, I will most definitely be calling upon your fantastic customer service. Thank you. Sincerely, Noreen
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    diane from willard, OH
  • Parts Used:
    809006501
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
door gasket replacement
ok
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Evelyn from Athens, TN
  • Parts Used:
    809006501
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Gasket came apsrt
As instructed in the video from your website. Very easy.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Rich from Plainfield, IL
  • Parts Used:
    809006501
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Water leaking out of door on bottom
I installed a new gasket on door bottom.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating: (2 Reviews)
3.5
★★★★★
★★★★★
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    1
  • 1
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Compatibility
This part works with the following models:
Fix Number: FIX9495545
Manufacturer Part Number: 809006501
Brand
Model Number
Description
Kenmore
58714000100
Dishwasher
Kenmore
58714000101
Dishwasher
Kenmore
58714000102
Dishwasher
Kenmore
58714001990
Dishwasher
Kenmore
58714001991
Dishwasher
Kenmore
58714001992
Dishwasher
Kenmore
58714001993
Dishwasher
Kenmore
58714002990
Dishwasher
Kenmore
58714002991
Dishwasher
Kenmore
58714002992
Dishwasher
Kenmore
58714002993
Dishwasher
Kenmore
58714003100
Dishwasher
Kenmore
58714008001
Dishwasher
Kenmore
58714008002
Dishwasher
Kenmore
58714008003
Dishwasher
Kenmore
58714009100
Dishwasher
Kenmore
58714009101
Dishwasher
Kenmore
58714009102
Dishwasher
Kenmore
58714012400
Dishwasher
Kenmore
58714012401
Dishwasher
Kenmore
58714012402
Dishwasher
Kenmore
58714012403
Dishwasher
Kenmore
58714012404
Dishwasher
Kenmore
58714012405
Dishwasher
Kenmore
58714012406A
Dishwasher
Kenmore
58714012407A
Dishwasher - DISHWASHER
Kenmore
58714012408A
Dishwasher - DISHWASHER
Kenmore
58714012409B
Dishwasher - DISHWASHER
Kenmore
58714012410B
Dishwasher - DISHWASHER
Kenmore
58714013400
Dishwasher