Gibson Washer Dryer Combo Parts

Start With Your Model Number

Need help finding your model number?
Find Parts Fast
Guaranteed Fit
Repair Videos
Fix.com search
Gibson Appliance Parts
Shop By Appliance Type Shop By Part Type

Popular Gibson Washer Dryer Combo Parts

Watch the install video
Rear Drum Bearing Kit – Part Number: 5303281153
Rear Drum Bearing Kit
$62.48
In Stock
★★★★★
★★★★★
3 Reviews
Fix Number
FIX459829
Manufacturer Part Number
5303281153
This ball-and-socket style bearing kit is used in your dryer to support the rear of the drum as it tumbles through the dry cycle. The bearing attaches on the inside of the rear panel of the dryer cabinet. Over time, the bearing or the bushing can wear out, and the ball support can become damaged. If these things happen, your dryer may not tumble, or it will be noisy while operating. If this is the case, you may need to replace these parts. This genuine OEM parts kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high-temperature lubricant, and the installation screws. Completing this repair requires taking the entire drum out of your dryer along with handling greasy parts, so have a rag handy for cleanup. Please ensure that you disconnect the power supply to your appliance before beginning this repair.
Fixes these symptoms
  • Drum Not Spinning
  • Marks left on clothes
  • Noisy
  • See more...

Installation Instructions

Fred from San Antonio, TX
High pitched squeel while running dryer, replaced rear bearing, drive belt and front slider.
Followed the steps outlined in the video. Read more...
Watch the install video
Upper Drum Glide – Part Number: 5303937139
Upper Drum Glide
$34.80
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX470317
Manufacturer Part Number
5303937139
If your dryer is noisy while tumbling, you may need to replace the drum glides. This genuine OEM part is found attached to the front panel of your dryer. It is used to reduce friction and allows the drum to rotate smoothly and quietly. Other signs you may need to replace the drum glide are if marks are being left on your laundry, or clothes are getting snagged. The drum glide is made of felt and nylon and includes the adhesive needed to attach the part.
Fixes these symptoms

Installation Instructions

michael from Cave City, KY
browning clothes .zipper on jackets were tore off
after watching video and reading the review, whole job was simple Read more...
Multi-Rib Drum Belt – Part Number: 137292700
Multi-Rib Drum Belt
$17.23
In Stock
Fix Number
FIX3408299
Manufacturer Part Number
137292700
This belt helps rotate from the drive motor to the drum.
Fixes these symptoms

Installation Instructions

michael from Cave City, KY
browning clothes .zipper on jackets were tore off
after watching video and reading the review, whole job was simple Read more...
Drum Glide - White – Part Number: 137513300
Drum Glide - White
$28.03
In Stock
Fix Number
FIX5574052
Manufacturer Part Number
137513300
Appliance requires 2 .Sold individually.
Fixes these symptoms

Installation Instructions

Aron from Morley, MI
The seal went bad from my shirt buttons
Just like the video.. ( thanks ). I will buy from you again.... Read more...
Watch the install video
Water Inlet Valve – Part Number: 134190200
Water Inlet Valve
$127.65
In Stock
Fix Number
FIX815509
Manufacturer Part Number
134190200
This washing machine water inlet valve has two ports for water to enter.
Fixes these symptoms

Installation Instructions

Yvonne from East Greenbush, NY
Washer did not dispense cold water
lift the top of the washer and remove three hoses connected to the water valve. Disconnect both sets of wires on the water valve and remove the two screws holding it in place. Insert new water valve, screw into place, replace wires and hoses. Most difficult part of the process was removing the top hose because the ends of the clamp holding it in place were extremely small. Read more...
Watch the install video
Drum Support Bearing – Part Number: 131825900
Drum Support Bearing
$6.33
In Stock
Fix Number
FIX418807
Manufacturer Part Number
131825900
The drum support bearing is an authentic OEM replacement part for your dryer. The bearing is used to support the drum and allow it to rotate smoothly and quietly. If your dryer is excessively noisy while tumbling, will not start, will not tumble, or if it is leaving marks on your laundry, you may need to replace the drum support bearing. The bearing is found on the inside of the rear panel of the dryer cabinet, and you will need to remove the drum in order to complete this repair. Please be sure to disconnect the power supply to your dryer before you begin.
Fixes these symptoms

Installation Instructions

michael from Cave City, KY
browning clothes .zipper on jackets were tore off
after watching video and reading the review, whole job was simple Read more...
M Series Ignition Coil Kit – Part Number: 5303931775
M Series Ignition Coil Kit
$21.45
In Stock
Fix Number
FIX470049
Manufacturer Part Number
5303931775
This coil ignition kit is used in dryers to open the gas valve when the dryer is on. This kit includes two coils. One is a two-wire secondary coil and the other is a three-wire booster coil. If your dryer does not heat or you notice heating inconsistencies, then the gas valve may be damaged and it is best to replace it to solve this problem. To repair, first release the two retaining clips that hold the top panel in place, then remove two screws that retain the front panel of the dryer cabinet. Next, pull the front panel forward and remember to disconnect the door switch. After accessing the gas coils, start removing the wires and unscrew the bracket that holds the coils. Remember to remove both the dual and main coil without removing the spacer. For more information on the kit and repair instructions, refer to diagram for a list of the parts.
Fixes these symptoms

Installation Instructions

Miguel from Hialeah, FL
Not heating, Not Drying
I opened the dryer with instructions from Youtube, and look for the parts that I thought had the problem: Flame sensor and Ignition Coil Kit. Put dryer back together and turned on, it works like a champ, :-) I requested a repairman from Sears and he told me to just buy a new one, because the part needed cost $459.00, but for some reason it made no sense to me, so I went to this site and put the model number of my dryer and the problem, and they suggested that I replace the flame sensor. Miguel Read more...
Watch the install video
Lower Front Felt Seal with Adhesive – Part Number: 5303937183
Lower Front Felt Seal with Adhesive
$19.85
In Stock
Fix Number
FIX832645
Manufacturer Part Number
5303937183
Fixes these symptoms

Installation Instructions

Aron from Morley, MI
The seal went bad from my shirt buttons
Just like the video.. ( thanks ). I will buy from you again.... Read more...
Watch the install video
Drive V-Belt – Part Number: 134511600
Drive V-Belt
$24.93
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX1146950
Manufacturer Part Number
134511600
If your washer drum is not spinning, there may be an issue with your drive belt. The drive belt wraps around the motor pulley and helps the basket to spin. Other signs there are issues with the belt is if there is a burning rubber smell, or the washer is noisy while spinning. The belt is subjected to wear and tear, and over time it may wear out. This is a genuine OEM part that is made of rubber.
Fixes these symptoms

Installation Instructions

michael from Cave City, KY
browning clothes .zipper on jackets were tore off
after watching video and reading the review, whole job was simple Read more...
Watch the install video
Front Lower Drum Seal – Part Number: 5303283286
Front Lower Drum Seal
$33.83
In Stock
Fix Number
FIX460194
Manufacturer Part Number
5303283286
This part helps to keep the dryer running as quietly as possible.
Fixes these symptoms

Installation Instructions

michael from Cave City, KY
browning clothes .zipper on jackets were tore off
after watching video and reading the review, whole job was simple Read more...

Appliance Type

Related Pages

Popular Gibson Washer Dryer Combo Models

View More
+