OEM Simplicity Snow Blower Parts & Accessories

Bearing, Ball 11/16x1

$10.83

Fix Number: FIX8887153
Manufacturer Part Number: 1705897SM

This authentic replacement part is designed for use with Craftsman snowblowers. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This bearing helps to secure the arbor shaft, allowing it to rotate. Bearings experience constant wear from pressure, heat, vibration, and friction eventually requiring replacements. This high-quality component is made of durable metal and is sold individually. A wrench set will be needed to perform this repair.

Washer-lock 5/16

$6.69

Fix Number: FIX9311087
Manufacturer Part Number: 936-0119

This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with the following snowblowers: Lawn tractor, tiller, chipper, shredder, lawn mower, snow blower, leaf blower/vacuum, log splitter, edger, hedge trimmer, and engine. Refer to the manual provided by the manufacturer for repair instructions.

Lawn Mower Nut

$8.33

Fix Number: FIX9999668
Manufacturer Part Number: 703409

This nut is mostly used in lawn tractors and snow blowers and is in different locations in the machine, depending on snowblower. It is made from metal and measures to 5/16 inches for the diameter and a thread count of 18. Tip: Remember there are different nuts used in the machine, be sure you are ordering the correct part. The tool needed for this repair is a wrench. *Please note: this part is sold individually. Refer to the diagram provided by the manufacturer for instructions.

BOLT, 5/16-18 X 3/4-INCH,

$6.51

Fix Number: FIX18594580
Manufacturer Part Number: 5025145X6SM

Wheel,friction 4.3 Ru

$35.03

Fix Number: FIX9263021
Manufacturer Part Number: 1501435MA

This is an original part from Craftsman for use with Craftsman Snowblowers. The fiction wheel assembly meshes with the friction disc, causing the drive wheel axle to turn. The most common reason for replacing the friction wheel is when the snowblower's wheels don't turn.This part is sold individually. Disconnect the spark plug wire before installing this part. The tools that you will need to replace the friction wheel disc are 3/8" socket, 9/16" socket, adjustable wrench, hammer, 1/2" socket, flat-head screwdriver, and lubrication.

Fixes these symptoms

Drive system does not work
See more...

Snow Blower Greased Bearing

$15.02

Fix Number: FIX9270711
Manufacturer Part Number: 2108202SM

This greased bearing is used on lawn and gardening tools and is sold individually. This part works to reduce friction between rotating parts. This happens when the balls receive the load and spin, which spreads the weight equally whilst the minimal contact area of the part reduces the friction. It is important to repeatedly check for bearings and replace them periodically as they experience constant wear when in operation from pressure, vibration, and heat. For this repair you will need a screwdriver and a set of wrenches. Remember to unplug or turn off power tool before starting this installation project.

Lawn Mower Wing Knob

$10.93

Fix Number: FIX9999469
Manufacturer Part Number: 703065

This knob is used on a variety of lawn and gardening equipment and acts as a nut to fasten bolts and stayed secure in your tool. Replace this part if your bolt is loose and needs security. The diameter is 5/16 inches and the thread count is 18. *Please note: this knob is sold individually. Check diagram provided by the manufacturer for the part location and installation instructions.

Snow Blower Assembly Chute

$61.46

★★★★★

2 Reviews

Fix Number: FIX9304189
Manufacturer Part Number: 762222MA

Snow blower discharge chute.

Fixes these symptoms

Can't adjust chute
See more...

Snow Blower Drive Belt

$26.72

Fix Number: FIX8891963
Manufacturer Part Number: 1733324SM

This is a notched traction drive belt for a snowblower, sold individually. It is also sometimes referred to as a ground drive belt. It measures approximately 3/8-inches wide and 33-1/6-inches long. This is a genuine part, designed to be an exact replacement for the original. It connects the engine pulley to the transmission pulley, which is what drives the snowblower. This belt is made of a durable rubber material, but like all belts, will wear over time and require replacement.

Fixes these symptoms

Auger will not turn
Drive system does not work
See more...

Snow Blower Shear Pin

$6.51

Fix Number: FIX9999468
Manufacturer Part Number: 703063

This is a genuine OEM sourced replacement shear pin designed for use with snow blowers/throwers. Shear pins are installed in order to protect your snowblower and it measures 1/4 X 1.750. If the auger gets jammed or clogged, shear bolt is designed to snap at a certain point of pressure, so it will not damage any other part of the unit. This pin is made out of metal and it is sold individually. Please note the cotter pin used to secure this pin is sold separately. In order to install or remove this pin you will need pliers.

Simplicity Snow Blower Parts

Popular Simplicity Snow Blower Parts

Simplicity Snow Blower Appliance Types

Related Simplicity Snow Blower Parts

Popular Simplicity Snow Blower Models

Simplicity Snow Blower Parts

Start With Your Model Number

Popular Simplicity Snow Blower Parts

Simplicity Snow Blower Appliance Types

Related Simplicity Snow Blower Parts

Popular Simplicity Snow Blower Models