Official Simplicity Snow Blower Seals and Gaskets

Gasket-float Bowl

$6.51

Fix Number: FIX9064482
Manufacturer Part Number: 693981

This is a Genuine OEM Authorized Gasket used on variety of Lawn and Garden Equipment Engines. This part is made out of Rubber and it is sold individually. If the carburetor is leaking fuel it is recommended to replace the Bowl Gasket. Gaskets and O-rings are a common source of problems. They eventually shrink, causing fuel and air leaks that lead to poor engine performance. When replacing this Gasket you would need a Screwdriver and a set of Wrenches.

Engine Oil Seal

$7.65

Fix Number: FIX9277860
Manufacturer Part Number: 391086S

This is a genuine OEM sourced replacement part designed for use with a variety of lawn and garden equipment. This item fits the cylinder and helps to provide an air tight seal to prevent any leaks. It is made out of rubber and it is sold individually. You will need a wrench set to complete this repair.

Engine Dipstick Tube Seal

$10.95

Fix Number: FIX9274579
Manufacturer Part Number: 281370S

This item is a genuine replacement part that has been OEM sourced and is intended to be used with lawnmower engines from Briggs & Stratton and Toro. The rubber seal is used to prevent oil from leaking at the connection between the bottom of the oil fill tube and the crankcase. This item also allows the fill tube to firmly sit into the case. The dipstick tube seal if available as an individual replacement part.

Gasket-exhaust

$6.51

Fix Number: FIX9064823
Manufacturer Part Number: 691893

This is a genuine replacement part manufactured for small engines. This special gasket lies between the muffler and cylinder head, it is recommended to replace the gasket whenever installing the muffler to ensure a good seal. The gasket is sold individually, and is included in the gasket kit which is available separately.

Gasket-float Bowl

$12.05

Fix Number: FIX9066958
Manufacturer Part Number: 698781

This is a genuine manufacturer sourced replacement part designed for lawn and garden equipment engines. This gasket provides an air-tight seal for the float bowl. Over time this gasket will shrink, become brittle and crack allowing for air leaks. At that time it should be replaced. It is made out of rubber material and it is sold individually. Replacing this item you would need a screwdriver.

Gasket-carb Body

$6.51

Fix Number: FIX9274449
Manufacturer Part Number: 27918

This part is an OEM from the Briggs & Stratton manufacturer. The carburetor body gasket is made for use with many small engines. The cardboard composite item is fitted onto the carburetor, providing protection from friction and leakage. The gasket is sold individually. However, it is also included with the carburetor assembly (297684). A screwdriver, pair of pliers and a nutdriver are often helpful with the removal and installation.

Engine Oil Seal

$8.75

Fix Number: FIX8947568
Manufacturer Part Number: 291675S

It is a genuine item that is supplied by the original equipment manufacturer for Briggs and Stratton engines commonly installed on a variety of lawn and garden equipment. This is a special component that provides a tight seal for the PTO side of the crankcase. Over time it may wear out and begin to crack eventually requiring a replacement. Check the appropriate diagrams for your specific model to ensure the correct installation of the new seal-oil. To perform this repair you will need a variety of tools such as a screwdriver, a wrench set, pliers and a tool to pick out the old seal. Make sure to drain the oil before starting this repair. Keep in mind, one durable rubber part is included.

Breather Gasket

$5.95

Fix Number: FIX8942323
Manufacturer Part Number: 27896A

This is an authentic replacement part sourced directly from the manufacturer. The breather gasket is commonly found in Toro snow throwers and Husqvarna engines. This part is made of flexible plastic, and is used to seal the connection between the breather body and the cylinder block. You may require a wrench when replacing this item. The breather gasket is provided as an individual replacement part.

Gasket

$6.17

Fix Number: FIX9274448
Manufacturer Part Number: 27915A

This genuine manufacturer-sourced replacement part designed for use with Lawn Boy and Toro lawn and garden equipment. The purpose of this gasket is to provide a tight seal for the intake manifold. Unfortunately, over time gaskets tend to wear out and can get compressed allowing air to escape. This can seriously affect engines performance and replacing the part should resolve the issue. Check the owners manual and the appropriate diagrams of your specific model for the exact location and the correct installation of this component. Note, one high-quality composite gasket is included.

Seal, Oil, .75 X 1.19

$16.58

Fix Number: FIX9312717
Manufacturer Part Number: 9566MA

The oil seal goes between the gear case and the flange bearing. This authentic item is supplied directly from the original equipment manufacturer for use with snowblowers made by Murray and Simplicity. The part is sold individually and is made of metal and rubber. A screwdriver might be helpful during the installation of this part. It will need to be replaced if it breaks or loses its seal.

Simplicity Snow Blower Seals and Gaskets

Popular Simplicity Snow Blower Seals and Gaskets

Related Simplicity Snow Blower Parts

Simplicity Snow Blower Seals and Gaskets

Start With Your Model Number

Popular Simplicity Snow Blower Seals and Gaskets

Related Simplicity Snow Blower Parts