Simplicity Snow Blower Hardware

Fix Number

FIX9298768

Manufacturer Part Number

710-0599

This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches long, and has 20 threads per inch. This style is a hex head with a built-in washer that will cut its own threads in most predrilled steel.

Fix Number

FIX8925657

Manufacturer Part Number

222698S

This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Pliers to replace this item.

Fix Number

FIX9311087

Manufacturer Part Number

936-0119

If the shafts in the drive belt pulley assembly spin freely when they should remain locked together, this lock washer may need replacement. The silver metal washer maintains tension on the pulley shaft nut to help keep it secure, it measures 5/16 inches inside and 0.5 inches outside. Sold individually, you should confirm compatibility with your equipment before purchasing this washer.

Fix Number

FIX8940580

Manufacturer Part Number

271716

This authentic OEM sealing washer is designed for your lawn equipment to create a tight seal within the carburetor body, preventing fuel or air leaks. If you notice any signs of leaks, such as dripping fuel or hissing sounds, it may indicate a faulty or worn-out sealing washer. Additionally, you might be experiencing engine performance issues like rough idling or difficulty starting. To replace the sealing washer, ensure that the machine is off and that the engine has cooled down. Remove the air breather cover and the filter itself, following the instructions provided in your user manual to access the carburetor. Depending on your specific equipment model, you may need to detach the springs from the carburetor choke mechanism, disconnect the fuel line and fuel tank, remove the choke lever, and detach the air breather base. Once you have located the carburetor, carefully unthread the main jet from the bottom of the carburetor bowl. Finally, slide off the old sealing washer, ensuring you take note of its positioning for accurate replacement. Please note that this sealing washer is sold individually.

★★★★★

★★★★★

1 Review

Fix Number

FIX8869451

Manufacturer Part Number

1501216MA

This is an original replacement part manufactured for use with Craftsman snow throwers. The special bolt is used to secure the auger blade to the axle. The bolt is used as a safeguard if the blade gets caught or stuck the force will snap the bolt rather than breaking more expensive parts like the auger transmission. The bolts are sold in pairs and include the nuts and washers, the bolt sets are sold as individual sets.

Fix Number

FIX9090328

Manufacturer Part Number

710-0703

This is an authentic carriage bolt is designed for use with lawn and garden equipment. It is sourced from original equipment manufacturer. This bolt has multiple uses depending on your equipment. Please refer to diagrams for correct use/application of this bolt. The square design under the bolts head is used to fit into a square opening which restrains the bolt and keeps it from turning when the blade nut is tightened. This carriage bolt is sold individually.

Fix Number

FIX9999468

Manufacturer Part Number

703063

This is a genuine OEM sourced replacement shear pin designed for use with snow blowers/throwers. Shear pins are installed in order to protect your snowblower and it measures 1/4 X 1.750. If the auger gets jammed or clogged, shear bolt is designed to snap at a certain point of pressure, so it will not damage any other part of the unit. This pin is made out of metal and it is sold individually. Please note the cotter pin used to secure this pin is sold separately. In order to install or remove this pin you will need pliers.

Fix Number

FIX9294812

Manufacturer Part Number

692255

This item is an OEM sourced replacement part that is intended to be used with small engines for snowthrowers and riding lawnmowers. The seal is used as a replacement of an original part from Briggs & Stratton or Toro machines. This item is used to prevent oil or fuel leaks between two different part assemblies. The item can have different applications depending on the model of the engine or machine. This seal is sold individually.

Fix Number

FIX9999596

Manufacturer Part Number

703300

This is a hair pin clip for your lawn equipment. You may also know it as a cotter pin. It is a multi-application part, depending on your unit, as well as the make and model. To correctly install the pin, refer to the diagrams provided with your equipment. It is made of metal, and can be used in various locations in the machine. You will need pliers to install this part.

Fix Number

FIX9140678

Manufacturer Part Number

791850

This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Keep in mind this high-quality product is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams for your model for the correct location and application of this hardware.