Simplicity Snow Blower Bearings

Fix Number

FIX8887153

Manufacturer Part Number

1705897SM

This authentic replacement part is designed for use with Craftsman snowblowers. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This bearing helps to secure the arbor shaft, allowing it to rotate. Bearings experience constant wear from pressure, heat, vibration, and friction eventually requiring replacements. This high-quality component is made of durable metal and is sold individually. A wrench set will be needed to perform this repair.

Fix Number

FIX9270711

Manufacturer Part Number

2108202SM

This greased bearing is used on lawn and gardening tools and is sold individually. This part works to reduce friction between rotating parts. This happens when the balls receive the load and spin, which spreads the weight equally whilst the minimal contact area of the part reduces the friction. It is important to repeatedly check for bearings and replace them periodically as they experience constant wear when in operation from pressure, vibration, and heat. For this repair you will need a screwdriver and a set of wrenches. Remember to unplug or turn off power tool before starting this installation project.

★★★★★

★★★★★

1 Review

Fix Number

FIX9174338

Manufacturer Part Number

9517MA

This is available as an individual replacement part. The auger bearing connects to the auger plate and is made of plastic. If this part becomes broken it will need to be replaced and may require a screwdriver during the installation. It is an OEM Craftsman part directly sourced from the manufacturer for use in snowblowers.

Fix Number

FIX16404114

Manufacturer Part Number

703973

This is a genuine manufacturer-approved replacement part which is specially designed for Snapper and Simplicity lawn and garden equipment. Bushings are generally utilized to provide a tight fit between connected components while allowing for movement with minimum friction. If the bushing is damaged or is missing, this will provide an identical replacement for the original hardware that was installed on a new unit. Refer to the appropriate diagrams for your model to ensure the proper repair procedure. Note, one durable metal bushing is included.

Fix Number

FIX8871773

Manufacturer Part Number

1501114MA

It is an authentic OEM sourced item which is specially produced for use with Murray, Snapper, and Simplicity snowthrowers. The axle bearing fits between the axle shaft and the flatwasher and helps to reduce friction. During the installation process, a screwdriver and a wrench set might be needed to replace this part. It may become broken and will need to be replaced. This is made of metal and is available as an individual replacement part.

Fix Number

FIX8874177

Manufacturer Part Number

1654930SM

This genuine manufacturer-sourced item is specially made for use with Murray, Snapper and Simplicity lawn and garden equipment. It is a special hardware that helps to provide a tight fit between connected parts. This is an identical replacement for a missing or a damaged component that was installed on a new unit. Make sure to refer to the appropriate diagrams for your model to ensure the proper repair procedure. A wrench set might be needed to replace this part. One durable bushing is included.

Fix Number

FIX8881538

Manufacturer Part Number

1667588SM

It is a genuine item that is supplied by the original equipment manufacturer for use with snowthrowers and snowblowers made by Murray, Snapper, and Simplicity. The bushing goes next to the worm chute and is made of plastic. When replacing this part a wrench might be required during the installation process. Over time this part may break and will need to be replaced. Keep in mind this high-quality part is sold individually.

★★★★★

★★★★★

1 Review

Fix Number

FIX9042483

Manufacturer Part Number

577023MA

This authentic replacement part is designed for use with Murray, Simplicity and Snapper snowblowers. Flange bearings are used to provide support for a shaft while reducing friction between rotating parts. The rollers take the load and spin, distributing the weight evenly while the minimal contact area of the roller reduces friction. Bearings experience constant wear from pressure, heat, vibration, and friction. Because of this, many bearings need to be periodically replaced. Make sure to check the diagrams of your model for the exact location and the correct installation of this component. It is sold individually. You will need a screwdriver and a wrench set to take apart the housing in order to gain access to this flange bearing. Keep in mind the screws utilized to secure this component are sold separately.

Fix Number

FIX9167498

Manufacturer Part Number

941-0155

This authentic OEM sourced replacement part is designed for MTD lawn and garden equipment. Ball bearings are generally utilized to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Unfortunately, over time components will wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality bearing is made of durable metal and is sold individually.

Fix Number

FIX8989552

Manufacturer Part Number

50304MA

Brng, fl .752idx1.002