Simplicity Parts

Fix Number

FIX9275043

Manufacturer Part Number

298090S

This is a genuine OEM sourced replacement part, it is made out of plastic with filter material inside. It is sold individually and is used on a variety of lawn and garden engines. This is an fuel filter for engines with a fuel pump which makes sure that the fuel delivered to the engine is free of any debris or contaminants. It will over time become clogged and restrict the fuel getting to the engine so it will need to be replaced.

Fix Number

FIX9270711

Manufacturer Part Number

2108202SM

This greased bearing is used on lawn and gardening tools and is sold individually. This part works to reduce friction between rotating parts. This happens when the balls receive the load and spin, which spreads the weight equally whilst the minimal contact area of the part reduces the friction. It is important to repeatedly check for bearings and replace them periodically as they experience constant wear when in operation from pressure, vibration, and heat. For this repair you will need a screwdriver and a set of wrenches. Remember to unplug or turn off power tool before starting this installation project.

Fix Number

FIX8887153

Manufacturer Part Number

1705897SM

This authentic replacement part is designed for use with Craftsman snowblowers. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This bearing helps to secure the arbor shaft, allowing it to rotate. Bearings experience constant wear from pressure, heat, vibration, and friction eventually requiring replacements. This high-quality component is made of durable metal and is sold individually. A wrench set will be needed to perform this repair.

Fix Number

FIX9265642

Manufacturer Part Number

1714760SM

This authentic OEM sourced replacement wheel is specially designed for use with Snapper, Simplicity and Murray lawn mowers and tractors. It is the wheel for the mower deck, it will help to support its weight and assist in turning. This wheel is made out plastic material and it is sold individually. Replacing this deck wheel is a simple task that should only require a set of wrenches.

Fix Number

FIX17016257

Manufacturer Part Number

394358B

This is a genuine OEM replacement part is made out of Plastic, it is sold individually. It is used on a variety of Engines and Motors. The purpose of it is to filter out dirt and other debris from contaminating the carburetor. It will over time become clogged and restrict the fuel getting to the carburetor so it will need to be replaced. This is a 75 micron fuel filter.

Fix Number

FIX9263021

Manufacturer Part Number

1501435MA

This is an original part from Craftsman for use with Craftsman Snowblowers. The fiction wheel assembly meshes with the friction disc, causing the drive wheel axle to turn. The most common reason for replacing the friction wheel is when the snowblower's wheels don't turn.This part is sold individually. Disconnect the spark plug wire before installing this part. The tools that you will need to replace the friction wheel disc are 3/8" socket, 9/16" socket, adjustable wrench, hammer, 1/2" socket, flat-head screwdriver, and lubrication.

Fix Number

FIX9042546

Manufacturer Part Number

585416MA

This Auger Drive Belt is an original part from Craftsman for use with Craftsman Snowblowers. The auger drive belt rotates the auger on the snowblower. The most common reason for replacing the drive belt is when the snowblower auger won't turn.This part is sold individually. Her is a list of tools that are needed to replace the auger drive belt are a 3/8 inch socket, 9/16 inch wrench, adjustable wrench and a clamp.

Fix Number

FIX9277860

Manufacturer Part Number

391086S

This is a genuine OEM sourced replacement part designed for use with a variety of lawn and garden equipment. This item fits the cylinder and helps to provide an air tight seal to prevent any leaks. It is made out of rubber and it is sold individually. You will need a wrench set to complete this repair.

Fix Number

FIX8891963

Manufacturer Part Number

1733324SM

This is a notched traction drive belt for a snowblower, sold individually. It is also sometimes referred to as a ground drive belt. It measures approximately 3/8-inches wide and 33-1/6-inches long. This is a genuine part, designed to be an exact replacement for the original. It connects the engine pulley to the transmission pulley, which is what drives the snowblower. This belt is made of a durable rubber material, but like all belts, will wear over time and require replacement.

Fix Number

FIX8984098

Manufacturer Part Number

498260

This is a replacement carburetor overhaul kit for your small engine. The carburetor is essential to the overall performance of your engine, and the carb can get clogged up over time for a variety of reasons. When your carb becomes clogged, it is often a good idea to take it apart and replace the various parts inside by purchasing a carburetor kit. This is a 15-piece set and contains everything that you will need to do a total overhaul of your carburetor. You may want to purchase some carb cleaner as well, to ensure that the new pieces in the carb kit fit and adhere properly.