Crosley Washer Hardware

Crosley Appliance Parts

Popular Crosley Washer Hardware

Fix Number
FIX11741866
Manufacturer Part Number
WP358237
This bolt is a genuine OEM replacement part, used to secure the agitator in your washing machine. Overtime the bolt can become worn out due to the vibrations of the washer, and will need to be replaced. The size of the screw head is 7/16 inch, so you will need the appropriately sized socket to complete this repair. The new bolt comes with a rubber gasket and a threaded sealant.
Fixes these symptoms
  • Leaking
  • Marks left on clothes
  • Spinning Issues
  • See more...
Plate Screw
$5.61
In Stock
Fix Number
FIX10064547
Manufacturer Part Number
W10752187
Fixes these symptoms
Washer Washer
$7.66
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11742027
Manufacturer Part Number
WP3949550
This part goes on the agitator retaining bolt.
Fixes these symptoms
Screw
$7.93
In Stock
Fix Number
FIX11746167
Manufacturer Part Number
WP8533953
Sold individually.
Boot Seal Retaining Ring
$16.10
In Stock
Fix Number
FIX12584490
Manufacturer Part Number
W11266654
Fixes these symptoms
Dryer Screw
$5.61
In Stock
Fix Number
FIX11746840
Manufacturer Part Number
WP90767
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the manufacturer for further repair guidance.
Fix Number
FIX11749057
Manufacturer Part Number
WPW10145155
This is a replacement suspension spring retainer for your washer. The retainer holds the suspension spring in place while the washer is operating. If you notice movement, or an unusual noise or shaking of your washer when it is in use, it could mean that the suspension spring has been disconnected because of a broken or missing spring retainer. You will find the suspension spring retainer at the bottom of the tub assembly. To replace the retainer, use a pair of pliers to disconnect the suspension spring from the chassis mount to relieve the tension. Then, remove the spring from the retaining clip, and remove the retaining clip from the bottom of the washer. Attach the new retaining clip to the bottom of the washer, reattach the spring, and stretch it slightly so it can connect to the chassis. This part is sold individually.
Fixes these symptoms
Washer Spacer Thrust
$11.06
In Stock
Fix Number
FIX11742044
Manufacturer Part Number
WP3951608
Sits in between the agitator base and upper agitator.
Fixes these symptoms
Screw
$11.22
In Stock
Fix Number
FIX417463
Manufacturer Part Number
131302800
This screw is designed to fit washers and dryers. Refer to the diagram provided by the manufacturer for further installation instructions and accurate application of screw in your tool.
Washer Door Boot Spring Clamp Assembly
$21.80
In Stock
Fix Number
FIX12349413
Manufacturer Part Number
W11218344
The door boot spring clamp holds the door boot in place.
Fixes these symptoms

Related Crosley Washer Parts