Official Crosley Washer Springs and Shock Absorbers

Suspension Spring

$8.00

Fix Number: FIX11743345
Manufacturer Part Number: WP63907

This suspension spring is a genuine OEM replacement part for a variety of washers and washer-dryer combos. The primary purpose of the suspension spring is to support the outer tub and keep the tub steady during loads that could cause an unbalance. If this part breaks, is worn down, or has stretched out and lost its spring, it could cause the load to be off-balance which can lead to excessive shaking, moving, noise, and leaks. This part is approximately 2 inches in length when compressed, made of durable metal, and is sold individually. For this repair, you will need a 1/4 nut driver, putty knife, flat blade screwdriver, and a pair of needle-nose pliers. Before you begin, disconnect the power, fill hoses, and drain hose to give you easy and safe access (drain hose may release some water, have a small container or towel near by). Your appliance contains 3 suspension springs, so keep this in mind if you need to order multiple of this part. We suggest you purchase several at a time, as they can be very useful to have on-hand.

Fixes these symptoms

Leaking
Shaking and Moving
Spinning Issues
See more...

Watch the install video

Washing Machine Suspension Rod Kit

$76.15

★★★★★

3 Reviews

Fix Number: FIX11703290
Manufacturer Part Number: W10780048

The suspension rods help to keep the tub in your washing machine stable and secure while cycling through your laundry. If your washer is excessively vibrating, moving around, or very loud when operating, there may be an issue with your suspension. This authentic OEM replacement kit includes 4 rods, 4 suspension balls, and 4 bushings. The parts come assembled and ready to be installed. You will need to disconnect the power supply, water inlet and drain hoses from the washer before beginning this repair.

Fixes these symptoms

Shaking and Moving
Spinning Issues
See more...

Watch the install video

Tub Spring

$7.03

Fix Number: FIX11751118
Manufacturer Part Number: WPW10250667

This tub spring is a genuine OEM replacement part for your washing machine and is sold individually. There are other names that the tub spring goes by, such as the suspension spring, balance spring, or counterweight spring. The purpose of this spring is to ensure that the tub sits straight during the spin cycle, and it does this by counterbalancing the weight of the motor. If the spring has broken, it will cause the tub to be off-balance, which can make the washer shake and become noisy when spinning. An off-balance tub can also cause damage to other components of your washer, so it should be fixed quickly. If your model of washing machine has more than one tub spring, they should all be replaced at the same time as they tend to wear evenly. The tools you will need to complete this repair are a pair of pliers, a Philips screwdriver, and a flat blade screwdriver. Please be sure to disconnect the power supply to your washer before beginning this repair.

Fixes these symptoms

Leaking
Shaking and Moving
Spinning Issues
See more...

Watch the install video

Shock Absorber Kit

$39.64

Fix Number: FIX3508101
Manufacturer Part Number: 5304485917

This kit is used for front load washers and includes 2 dual-stage shock absorbers, 1 spare shock mounting pin and 4 locking nuts. These shock absorbers keep the washer from vigorous shaking during it's cycles.

Fixes these symptoms

Leaking
Noisy
Shaking and Moving
See more...

Watch the install video

Suspension Spring

$11.77

Fix Number: FIX11738823
Manufacturer Part Number: WP21001598

This suspension spring is used with many washing machines. It is made entirely of metal and is seven inches long.

Watch the install video

Tub Centering Spring - 2 Pack

$7.87

Fix Number: FIX3497596
Manufacturer Part Number: W10400895

This tub centering spring is a genuine OEM replacement part for your washing machine. If your washer is noisy or excessively shaking while it is operating, you may need to replace the springs. The metal springs are used to reduce the shaking of the washer when the tub is agitating or spinning. Two springs are included with this kit.

Fixes these symptoms

Shaking and Moving
See more...

Watch the install video

Tub Wear Pads - Package of 3

$16.83

Fix Number: FIX334620
Manufacturer Part Number: 285744

This package of pads contains three tub wear pads.

Fixes these symptoms

Shaking and Moving
See more...

Watch the install video

Suspension Rod Support

$6.87

★★★★★

1 Review

Fix Number: FIX3502189
Manufacturer Part Number: W10440729

If your washing machine is shaking, noisy, or moves while operating, you may need to replace the suspension rod supports. These supports are used to secure the suspension rods, which help ensure that your washer runs smoothly. If the supports have become broken or damaged, it can cause the appliance to shake, move, and be noisy while running. This kit includes 8 suspension rod supports, comprised of two different types with 4 of each included in the set. These are genuine OEM replacement suspension rod supports, which are made of plastic and measure approximately 1.5 inches in diameter.

Fixes these symptoms

Shaking and Moving
See more...

Watch the install video

Leveling Spring

$11.13

Fix Number: FIX394983
Manufacturer Part Number: 8316845

This spring is used on the leveling components in a washer. Please note, this spring may differ in appearance, but functions the same as original.

Fixes these symptoms

Leaking
Shaking and Moving
See more...

Watch the install video

Snubber Ring

$13.09

Fix Number: FIX11738845
Manufacturer Part Number: WP21002026

This snubber ring fits washers and is located between the leg and dome assembly. The ring has a diameter of 9 inches. It is used to reduce noise and vibration for stability when the washer is operating. If your washer shakes a lot and makes loud noises, then it is best to replace this part to solve your problem. The tools required for this repair are: short flathead screwdriver, flathead screwdriver, Philips screwdriver, 1/4 inch nut driver, 5/16 inch nut driver, 3/8 nut driver, ratchet with extension, putty knife, locking pliers, slip joint pliers, and 3/8 inch socket.

Fixes these symptoms

Shaking and Moving
Spins slowly
Will not agitate
See more...

Crosley Washer Springs and Shock Absorbers

Popular Crosley Washer Springs and Shock Absorbers

Related Crosley Washer Parts

Crosley Washer Springs and Shock Absorbers

Start With Your Model Number

Popular Crosley Washer Springs and Shock Absorbers

Related Crosley Washer Parts