OEM Whirlpool Refrigerator Parts & Accessories

Watch the install video

$7.70

Light Bulb - 40W

★★★★★

2 Reviews

Fix Number FIX884734

Manufacturer Part Number 8009

This is a genuine OEM 40-Watt replacement light bulb that is compatible with various types of appliances. It has a frosted glass bulb with a standard metal socket base, making it easy to screw and unscrew by hand to replace. It is designed to tolerate extreme temperatures, which is why it is commonly used to light the inside of refrigerators and ovens. Depending on the appliance and location of the bulb, disconnecting the power is recommended. This bulb is sold individually.

Installation Instructions

Helen from Quincy, MA

lightbulb in refrigerator went out

Removed plastic shield on top of refrigerator. Removed old bulb.. Replaced new bulb. Reinstalled plastic shield. Voila! Read more...

Watch the install video

$31.63

Refrigerator Door Switch

★★★★★

3 Reviews

Fix Number FIX12728638

Manufacturer Part Number W11384469

Door switch turns the light off when you close the door.

Fixes these symptoms

Light not working
See more...

Installation Instructions

Marilyn from Dublin, OH

Light switch no longer worked

Turn off and unplug your refrigerator. I used the screwdriver on the left side of the part (where the plug is) and used the putty knife at the same time on the right side to push the spring lock portion of the part in. The part snapped out. I unplugged the left contact from the plug and put it on the new part, then I unplugged the right contact and put it on the new part. I did this so the wires would not go up into the refrigerator and be hard to find. I put the left side of the new part where the plug and contacts are in first then I snapped the right side in place. I plugged the refrigerator back in and it worked perfectly. Just take your time and gently remove and reconnect the new part. The store where I bought my refrigerator wanted $69.95 for a service call plus an hourly charge and part charge. Count on this site for your parts and do it yourself. I ordered the part on Monday, it was delivered on Tuesday around noon and I made the repair that afternoon. Read more...

Watch the install video

$10.72

Lower Door Closing Cam

★★★★★

1 Review

Fix Number FIX11739042

Manufacturer Part Number WP2182179

The lower door closing cam raises the door to keep it from touching the refrigerator liner when the door is closed. It fits both the left and right side of the refrigerator door. The most common reasons for replacing this part are the fridge door slips down when opened, the door does not open smoothly, or does not close by itself. This original part is made of durable black plastic, is approximately 1.1 inches by 1.5 inches, and is sold individually. To effectively install this part, you will need a 5/16 nut driver and a small flat blade screwdriver. Before you begin, disconnect the power and the water supply. We suggest lubricating this part before installing. To make the repair, remove the top hinge cover, then the top hinge support. Lift the door from the bottom support and remove the old door cams. Replace the cams and put the door back on the lower hinge support. Replace the top hinge support and that completes the repair.

Fixes these symptoms

Clicking sound
Door Sweating
Door won’t open or close
See more...

Installation Instructions

Curtis from Highland, UT

The door would not stay closed, the closing cams were completely worn out.

This is a very simple repair, by far the hardest part was emptying all of the condiments out of the door. After that was done I removed the top hinge cover and then the hinge. I lifted the door off of the refrigerator and set it on a card table so that it was off the ground. I took the worn cams off of the door and the refrigerator cabinet (one screw for each of them). I screwed the new cams into position and lubricated them with petroleum jelly. Then I put the door back in position and reattached the top hinge. It works perfectly again. Read more...

Watch the install video

$68.94

Refrigerator Crisper Drawer with Humidity Control

★★★★★

10 Reviews

Fix Number FIX11739119

Manufacturer Part Number WP2188656

This is a genuine OEM replacement crisper drawer for refrigerators. It is sold as an individual part. The crisper drawer with humidity control allows you to adjust the humidity within the crisper, which can help preserve the quality of your produce. It attaches to the inner part of the refrigerator to the bottom of the crisper shelf. If your crisper drawer is missing, cracked, damaged, or discolored, it needs to be replaced. It is made of durable clear plastic with a white handle and is sold individually. No tools are needed for installation, simply slide the new crisper drawer into the tracks.

Fixes these symptoms

Clicking sound
Door Sweating
Door won’t open or close
See more...

Installation Instructions

Ollie from Sayville, NC

Replace Crisper Drawer with Humidity Control

Pull refrigerator from wall to be able to open the door wide enough to slide old Crisper out and slide new one in. Push refrigerator back in place! Read more...

Watch the install video

$56.61

Capacitor

★★★★★

2 Reviews

Fix Number FIX11757023

Manufacturer Part Number WPW10662129

The capacitor, also known as a run capacitor, is a component in your fridge that allows the compressor to cycle on and off to maintain a constant temperature. If your fridge and freezer are too warm it may be necessary to replace the capacitor. Other symptoms include an unusually noisy and overheated compressor. You can check the capacitor for continuity using a multimeter. This is a genuine OEM replacement part made of black plastic that measures 1 inch by 1.5 inches. When replacing this part, be sure to check the electrical contacts on the old capacitor. If they are corroded or burnt, you will need to replace the overload relay assembly as well. Be sure to disconnect the power supply to your refrigerator before beginning this repair.

Fixes these symptoms

Clicking sound
Freezer section too warm
Fridge and Freezer are too warm
See more...

Installation Instructions

Lisa from Yulee, FL

Both comparments very warm but fan working and lights on

Bought Capacitor, but I had to purchase Combo Start Up Kit that Cap goes into. The site said that 78% of the time my problem of both compartments being warm were resolved/repair by replacing Capacitor, but when the item was replaced it did not and my son looked further and found that it would then be the Combination Start Up Kit (Part# PS11740412), which starts the compressor. Thanks to this site the video used to install both parts. I was able to use the old Capacitor and I am returning the new one first purchased. Read more...

Watch the install video

$47.83

Refrigerator Door Shelf Bin

★★★★★

1 Review

Fix Number FIX11752778

Manufacturer Part Number WPW10321304

This is a manufacturer-approved refrigerator door shelf bin, also sometimes referred to as the crisper bin. It is sold individually. It is made of clear plastic with a white plastic trim. It is used as a storage shelf for common refrigerator items, such as jars, bottles, cans, and condiments. When this part needs to be replaced it will be visually obvious. Over time, the plastic can sometimes crack or break due to the constant exposure to cold temperature and will need to be replaced. This is a very quick and easy repair that does not require any tools. You will simply lift up and out of place to remove, and slide the new bin onto the tabs, making sure it is level and secure before closing the refrigerator door.

Fixes these symptoms

Door won’t open or close
Ice maker won’t dispense ice
Leaking
See more...

Installation Instructions

Evelyn from Birmingham, AL

Changed water filter. No problem. It had never been changed. I had a cracked door bin that kept falling out.

Just turned off water supply. Popped the old filter out inserted the new one. Made sure it was secure. Turned the water supply back on. The self just snapped in place Read more...

Watch the install video

$10.56

Door Cam - Black

★★★★★

1 Review

Fix Number FIX11752991

Manufacturer Part Number WPW10329686

This is a refrigerator or freezer lower door closing cam. This part includes the door cam only, but you will need a new mounting screw to complete this repair, and it is sold separately. Door cams are mounted around the door pivot point and are designed to help close the refrigerator doors and keep them securely aligned in the correct position. For this repair you will need a 5/6 nut driver, a 5/16 socket, and a ratchet. We suggest lubricating the cam during installation to help it move smoothly.

Fixes these symptoms

Clicking sound
Door Sweating
Door won’t open or close
See more...

Installation Instructions

Tim from Crown Point, IN

Refrigerator upper and lower door cams on the door bottom were worn out. Door swings open without the usual stop.

Remove upper door hinge and lift door up and out of bottom hinge. Pry out both lower door cams if possible from the lower door. If not possible, break the lower door cam, and then grind out the plastic part of the old door cam from the refrigerator door. Install new upper and lower door cams and put some lite grease on them. Lower door onto bottom hinge and reinstall upper door hinge. Read more...

$6.25

Touch-Up Paint - White

Fix Number FIX385132

Manufacturer Part Number 72017

18ml

Installation Instructions

Al from Cape Coral, FL

No heat when trying to dry clothes .

Followed instructions on your videos. Everything went as planned and the dryer works like new.... Read more...

Watch the install video

$12.87

Hinge Bracket

Fix Number FIX11739061

Manufacturer Part Number WP2183805

This part is used to support the hinge.

Fixes these symptoms

Door won’t open or close
See more...

Watch the install video

$147.07

Replacement Ice Maker

★★★★★

6 Reviews

Fix Number FIX358591

Manufacturer Part Number 4317943

The ice maker works by filling with water from the inlet valve, freezing it into cubes, and then dispensing the cubes into the storage bucket. It will then refill with water and repeat this process until the ice storage bucket is full. If yours is not making ice or it is leaking, it may be time to replace the ice maker. Depending on usage and water quality, these should be replaced every three to ten years. Please note that this kit does not come with a new shut off arm (also known as a bail arm). You will need to reuse the arm from your old ice maker, or you can purchase a new one separately. This genuine OEM parts kit includes the replacement ice maker, wire harnesses (flat and round plug versions), and the mounting hardware. The wire harness from your old ice maker can also be reused if you choose. This model is approximately 11x5 inches in size, made of plastic and metal, and is black and silver in color. This model does not work with refrigerators that have the ice auger on the door, it is meant to sit in the upper left hand of the freezer. Please ensure that you disconnect the power and water supply before beginning this repair.

Fixes these symptoms

Ice maker dispenses too little ice
Ice maker dispenses too much ice
Ice maker not making ice
See more...

Installation Instructions

ron from aliquippa, PA

ice maker not working properly

replace ice maker Read more...

Whirlpool Refrigerator Parts

Water Filter Finder

Popular Whirlpool Refrigerator Parts

Appliance Type

Related Pages

Popular Whirlpool Refrigerator Models

Whirlpool Refrigerator Parts

Start With Your Model Number

Water Filter Finder

Popular Whirlpool Refrigerator Parts

Appliance Type

Related Pages

Popular Whirlpool Refrigerator Models