Whirlpool Refrigerator Brackets and Flanges

Whirlpool Appliance Parts

Popular Whirlpool Refrigerator Brackets and Flanges

★★★★★
★★★★★
2 Reviews
Fix Number
FIX11739027
Manufacturer Part Number
WP2180226
The control bracket, also known as a dispenser control bracket, holds the switches and light socket for the water and ice dispenser on your freezer door. If you are having issues with the dispenser not providing water or ice, or your ice maker is not working, you may need to replace the control bracket. It is found behind the panel, or escutcheon, for the dispenser. Before beginning this repair, you should disconnect the power to your fridge as you will be working with electrical components. You will need to remove the spacers for the two switches and the light socket from the old bracket and place them on the new one. This is a genuine OEM replacement part.
Fixes these symptoms
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • Not dispensing water
  • See more...
Fix Number
FIX17917873
Manufacturer Part Number
W11745278
This hinge bracket, also known as a door stop, is attached to the bottom of the door and is used to limit how far the door swings out to protect the refrigerator itself, and any surrounding cabinets from potential damage. If your fridge is having issues opening or staying closed, check the hinges for any damage or cracking. To replace this bracket, simply remove the door off your refrigerator, unscrew and remove this bracket from the bottom of the door, and install the new one. This hinge bracket is an OEM replacement and is compatible with several different makes and models of refrigerator.
Fixes these symptoms
  • Clicking sound
  • Door won’t open or close
  • See more...
Bracket
$27.83
In Stock
Fix Number
FIX11754209
Manufacturer Part Number
WPW10397055
This refrigerator door stop bracket limits excessive door swing. Mounted near the lower hinge area, it provides a stopping point that helps prevent the door from opening beyond its intended range. A bent, cracked, or broken bracket may allow overextension or cause scraping near the hinge. Empty the door shelves and keep the door securely supported before removing hardware, then check its opening range gently once installation is complete. To help reestablish controlled opening and reduce the risk of contact with nearby surfaces, replace the damaged stop. This is an OEM replacement obtained directly from the manufacturer.
Fixes these symptoms
Fix Number
FIX11739245
Manufacturer Part Number
WP2198641
This is the replacement ice maker cover bracket for your refrigerator. It is made of white plastic and is approximately 5 inches wide and 2 inches long. The ice maker cover bracket holds and supports the ice maker cover. If the ice maker cover is loose or missing, you may need to replace the bracket. You will also want to replace the bracket if it will not stay in place, or if it is cracked or broken. To replace the cover bracket, simply remove the ice maker cover, then use a ¼ inch nut driver to loosen and remove the bracket. Screw in the new bracket and replace the cover to complete your repair. This is an OEM part that is sold individually.
Fixes these symptoms
Holder
$9.79
In Stock
Fix Number
FIX11739144
Manufacturer Part Number
WP2188919
Fixes these symptoms
BRACKET
$27.28
In Stock
Fix Number
FIX16221228
Manufacturer Part Number
W11500948
This bracket is used in conjunction with the ice maker.
Fix Number
FIX11751991
Manufacturer Part Number
WPW10284685
Pivot Block
$16.35
In Stock
Fix Number
FIX11753272
Manufacturer Part Number
WPW10344432
Bracket
$61.55
In Stock
Fix Number
FIX2069868
Manufacturer Part Number
67006325
Hold the refrigerator water filter housing steady inside the cabinet with this base bracket. When the bracket cracks or breaks, the housing may shift or feel loose during filter removal and installation. A replacement provides support for the filter assembly again. Check the housing itself and its attachment points before fitting it: damage there can also allow movement or stop the assembly from fastening securely. This is an OEM bracket sourced directly from the manufacturer.
MOUNTING PLATE ASSEMBLY
$73.24
In Stock
Fix Number
FIX11752211
Manufacturer Part Number
WPW10293212
To support the ice delivery mechanism, this refrigerator dispenser chute and mounting plate assembly holds the auger motor in position and provides a path for ice to travel toward the door dispenser. With cracks, broken mounting points, or warped sections, the motor may shift, cause misalignment, or interfere with ice delivery. Unplug the refrigerator and remove the ice bucket before working on the assembly, then secure all transferred components before reassembly. To help reestablish stable mounting and a clear dispensing path, replace the damaged assembly. This is an OEM replacement obtained directly from the manufacturer.

Related Whirlpool Refrigerator Parts