Kenmore Dryer Seals and Gaskets

Kenmore Appliance Parts

Popular Kenmore Dryer Seals and Gaskets

★★★★★
★★★★★
1 Review
Fix Number
FIX8691753
Manufacturer Part Number
W10612022
This is a genuine OEM replacement rear drum seal for your dryer. This seal is made of felt and comes with the adhesive required for installation. The purpose of the seal is to prevent hot air from escaping the drum while the dryer is operating. If you notice that it is taking too long for your laundry to dry, that marks are left on your laundry, or the machine is noisy or will not tumble, then you may need to replace the seal.
Fixes these symptoms
★★★★★
★★★★★
1 Review
Fix Number
FIX970088
Manufacturer Part Number
280114
This part seals the drum to prevents air from escaping. This includes silicone rubber adhesive.
Fixes these symptoms
Upper Drum Glide
$34.80
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX470317
Manufacturer Part Number
5303937139
If your dryer is noisy while tumbling, you may need to replace the drum glides. This genuine OEM part is found attached to the front panel of your dryer. It is used to reduce friction and allows the drum to rotate smoothly and quietly. Other signs you may need to replace the drum glide are if marks are being left on your laundry, or clothes are getting snagged. The drum glide is made of felt and nylon and includes the adhesive needed to attach the part.
Fixes these symptoms
Fix Number
FIX11741506
Manufacturer Part Number
WP339956
This genuine OEM part is a lint trap housing seal for your dryer. This part is used to form an airtight seal at the back of the dryer drum and the lint duct. The foam seal is approximately 28 inches in length, 1 inch wide, about half an inch thick, and has an adhesive backing. The seal is located between the lint duct and the bulkhead of the dryer. You may need to replace the seal if there is air leaking from the dryer while it is running, which would result in your laundry taking too long to dry.
Fixes these symptoms
Door Gasket
$66.91
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX11731610
Manufacturer Part Number
W10861521
This is a genuine OEM replacement door gasket for your dryer. The gasket, also known as a door seal, is used to provide an airtight seal when the dryer door is closed. If the gasket has failed it can cause hot air to escape the dryer and allow for cooler room temperature air to be sucked in. This causes the dryer to run longer, which means it is less efficient. When replacing this part, we find it easiest to remove the door from the dryer and place it on a suitable work surface. Please note that you will need a high temperature adhesive to attach the gasket to the door, and this glue is not included with the gasket.
Fixes these symptoms
Fix Number
FIX832645
Manufacturer Part Number
5303937183
Fixes these symptoms
Fix Number
FIX333333
Manufacturer Part Number
239087
Includes high temperature adhesive.
Fixes these symptoms
SEAL-DOOR
$74.19
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11766744
Manufacturer Part Number
W10906683
Fixes these symptoms
Fix Number
FIX460194
Manufacturer Part Number
5303283286
This part helps to keep the dryer running as quietly as possible.
Fixes these symptoms
Fix Number
FIX832644
Manufacturer Part Number
5303937182
The upper felt seal for your dryer is attached to the top edge of the drum support area, and is held there by a high temperature adhesive. It creates a seal where the dryer door opens and closes, so that heat remains in the dryer while it tumbles. If your old upper felt seal is coming apart, you notice that hot air is leaking out the dryer door, or your clothes are taking too long to dry, you may need to replace the seal. When you order this part, it comes with the upper felt seal, as well as the required high-temperature adhesive.
Fixes these symptoms

Related Parts