Official Kenmore Dryer Filters

Dryer Lint Filter

$54.23

Fix Number: FIX3531962
Manufacturer Part Number: ADQ56656401

The Dryer's Lint Filter is used to collect lint during the dryer cycle as it passes through the dryer vent, in order to prevent damage to the machine. This manufacturer-approved part comes in gray, measures around 12 inches wide by 11 inches high, and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. We recommend that you thoroughly clean the lint filter before every load, but even with good maintenance, this hard-working part is often damaged or worn over time. If your dryer isn't drying quickly, the filter may be responsible. The manufacturer has made an authorized substitution to the lint filter. Special details: When replacing lint screen ADQ56656401 you may need to also replace lint screen housing MCK49049101 and lint screen guide MEA49050001 to prevent items from catching on the lint screen, depending on your model.

Fixes these symptoms

Door won’t close
Marks left on clothes
See more...

Dryer Lint Filter Assembly

$35.48

★★★★★

1 Review

Fix Number: FIX3527575
Manufacturer Part Number: 5231EL1001C

A fully functional lint filter is an essential part for your dryer. It helps to trap lint and other debris from your laundry and prevents it from entering the ducts. An excess buildup of lint can be dangerous as it becomes a fire hazard. Regular cleaning of the filter can help to prevent this from happening. If your lint filter becomes damaged, replacing it is an easy repair that does not require any tools. Simply remove the broken filter from your filter and put the new one in its place.

Fixes these symptoms

Door won’t close
See more...

Watch the install video

Dryer Lint Filter

$50.03

★★★★★

1 Review

Fix Number: FIX3527578
Manufacturer Part Number: 5231EL1003B

If the lint filter in your dryer has become damaged, this is a genuine OEM replacement filter. It is important to always run the dryer with the filter in place, as it traps lint and other debris from entering the dryer vents. Without the filter, the vents can become clogged with lint which can prevent your laundry from drying properly along with being a fire hazard. Replacing this part is an easy repair. Simply remove the old filter, and insert the new one in its place. Always be sure to clean the filter between each load of laundry.

Fixes these symptoms

Marks left on clothes
See more...

Watch the install video

Lint Filter

$61.41

★★★★★

2 Reviews

Fix Number: FIX1491676
Manufacturer Part Number: W10120998

If the lint filter in your dryer has become damaged and unusable, it is important to replace it as soon as possible. The filter traps lint and other debris from your laundry, keeping it out of your air ducts. Regular cleaning of the filter helps your clothes to dry faster as it allows for better airflow, and it helps to prevent fires. A vacuum attachment can be used to clean the slot of any debris that the filter did not trap. Replacing this part is an extremely easy repair that does not require any tools. Simply remove the old filter just like you would do to clean it and put the new one in its place. This filter is a genuine OEM part that measures approximately 12.5 inches wide and 10.5 inches long.

Fixes these symptoms

Door won’t close
Marks left on clothes
See more...

Watch the install video

Dryer Lint Screen Filter

$32.89

★★★★★

4 Reviews

Fix Number: FIX11757278
Manufacturer Part Number: WPW10717210

This is a single OEM white lint filter for your dryer, located on the top of the appliance. It prevents lint from getting into the exhaust vent and on your clothes. It is very important to clean the lint filter before each load, and to replace it as soon as it damages. This repair could not be simpler, start by pulling the old lint filter completely out of the housing. Use a lint brush to clean the inside of the housing to remove any built-up lint before installing the new one. Not cleaning this area on a regular basis could shorten the life of your dryer and be a fire hazard. Slide the new filter into place, and the job is complete. This genuine OEM lint filter measures approximately 23-inches, including the attached handle, and is sold individually.

Watch the install video

Lint Filter

$60.89

Fix Number: FIX7787727
Manufacturer Part Number: ADQ73373201

This lint filter assembly for your dryer catches lint and debris from your clothes. You can find it near the door. It helps keep the air flowing properly and stops lint from blocking the exhaust ducts. If it is broken or clogged, your clothes will take more time to dry, and there is a risk your dryer could overheat, leading to a fire. This is a genuine replacement part from the original manufacturer and is sold individually.

Lint Filter

$56.89

Fix Number: FIX2349312
Manufacturer Part Number: 134793600

Watch the install video

Lint Filter - White Frame

$70.06

★★★★★

1 Review

Fix Number: FIX11767017
Manufacturer Part Number: WE18X25100

The lint filter is an important component of your dryer, as it traps lint and other debris from entering the dryer vents, where they can become a fire hazard. If your lint filter has become damaged or is missing entirely, it should be replaced. Clogged lint filters or dryer vents can impact the efficiency of your dryer, and it can take longer for your clothes to dry, or they may still be damp when the cycle ends. Replacing your old filter with this new OEM part is an easy job that does not require any tools. Simply remove the damaged filter, and insert the new one in its place.

Fixes these symptoms

Marks left on clothes
Noisy
Too hot
See more...

Watch the install video

Lint Filter with Handle

$36.81

★★★★★

3 Reviews

Fix Number: FIX345247
Manufacturer Part Number: 339392

This is a genuine OEM replacement lint filter for your dryer. If your lint filter has become damaged or is missing, it is important to replace it. The filter traps lint and prevents debris from entering your dryer vents. Running your dryer without a lint filter can cause your vents to become blocked, which decreases the efficiency of your dryer and is a fire hazard. Replacing this part is a very easy repair that does not require any tools. Simply lift the old filter out and replace it with the new lint filter.

Watch the install video

Dryer Lint Filter and Cover

$54.39

Fix Number: FIX11726200
Manufacturer Part Number: W10828351

This lint filter and cover assembly is a genuine OEM replacement part for your dryer. The filter is used to prevent lint and debris from entering the dryer vents. If the filter has become damaged or is missing, it will need to be replaced. This kit comes as two pieces, the filter itself and the cover. No tools are required to replace this part, simply pull out the old filter and insert the new one in its place.

Fixes these symptoms

Marks left on clothes
Noisy
See more...

Kenmore Dryer Filters

Popular Kenmore Dryer Filters

Related Kenmore Dryer Parts

Kenmore Dryer Filters

Start With Your Model Number

Popular Kenmore Dryer Filters

Related Kenmore Dryer Parts