Kenmore Dryer Hardware

Kenmore Appliance Parts

Popular Kenmore Dryer Hardware

Fix Number
FIX11755850
Manufacturer Part Number
WPW10512946
This small but mighty OEM piece is called a tri-ring and is used to support the drum roller shaft and the idler pulley shaft in your dryer. It helps to provide a tight seal between components by evenly distributing pressure. The part is triangular in shape, and less than an inch in size. Overtime it can become brittle or compressed, which can lead to a noisy tumbling cycle, or your dryer not tumbling at all. The tri-ring itself is simple to replace, simply slip off the damaged one and slip on the new. However, to access the drum roller or idler pulley, you will need to remove the front panel and drum of your dryer. This may require tools like a Phillips screwdriver, a quarter inch nut driver, putty knife, a small flat blade screwdriver, and a pair of needle nose pliers depending on your model. Ensure that the power is disconnected before beginning your repair.
Fixes these symptoms
Single Front Panel Cip
$16.39
In Stock
Fix Number
FIX11731288
Manufacturer Part Number
W10854425
This part is the replacement single front panel clip for your dryer. It is made of metal and is approximately 2 inches long and ¾ inch wide. The front panel retainer clip is what holds the front panel on to the dryer. If the clip is damaged or missing, or if the front panel appears loose, you may need to replace the clip. This part is sold individually and is an authentic OEM part.
Fixes these symptoms
Screw
$12.67
In Stock
Fix Number
FIX11757021
Manufacturer Part Number
WPW10661886
This authentic OEM part is a mounting screw for the door handle on your refrigerator. If the door handle is loose or you are having issues opening or closing the door, a new mounting screw may solve these issues. Please note that the screw is sold individually, so if you need to replace more than one you will need to order the appropriate quantity.
Screw, 8/18 x 3/8
$5.61
In Stock
Fix Number
FIX11746840
Manufacturer Part Number
WP90767
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the manufacturer for further repair guidance.
Single Access Panel Spring Retainer/Clip
$9.72
In Stock
Fix Number
FIX11741425
Manufacturer Part Number
WP3388229
Sold Individually.
Fixes these symptoms
Screw
$11.22
In Stock
Fix Number
FIX417463
Manufacturer Part Number
131302800
This screw is designed to fit washers and dryers. Refer to the diagram provided by the manufacturer for further installation instructions and accurate application of screw in your tool.
Knob Spring-Clip
$7.98
In Stock
Fix Number
FIX11743754
Manufacturer Part Number
WP688805
Also known as the inside sleeve for the knob to be able to properly fit over the shaft of the switch. Sold individually.
Screw - 10-16 x 1
$7.93
In Stock
Fix Number
FIX11741409
Manufacturer Part Number
WP3387230
This is a multi-use screw mostly used in dryers. It has a diameter of #10, length of one inch, and thread size of 16. Remember to follow safety practices and instructions provided in the manufacturer manual. *Please note: this screw is sold separately.
Washer, Thrust
$5.61
In Stock
Fix Number
FIX11748620
Manufacturer Part Number
WPW10121334
Fixes these symptoms
Cover Screw
$7.93
In Stock
Fix Number
FIX11740701
Manufacturer Part Number
WP308685
This is a multi-use cover screw. It fits appliances such as dryers, ranges, washers, dishwashers, refrigerators, air conditioners, washer dryer combos, freezers, wall ovens, microwaves, dehumidifiers, cooktops, trash compactors, grills, and ice makers. *Please note: This part is sold individually.

Related Kenmore Dryer Parts