Kenmore Dryer Elements and Burners

Kenmore Appliance Parts
Shop By Part Type

Popular Kenmore Dryer Elements and Burners

$61.74
In Stock
Heating Element - 240V 5400W
★★★★★
★★★★★
(8)
Fix Number FIX334313
Manufacturer Part Number 279838
Sourced directly from the manufacturer, this heating element is an OEM approved replacement part for a variety of dryers and is sold individually. It measures approximately 10.5 inches long, 7.5 inches wide and 2 inches deep. The heating element is the primary source of heat used to dry the clothes in your dryer. This heating element is strung with a coiled wire made of a nickel and chrome alloy. It may need to be replaced if your dryer does not produce heat, if it produces too much heat, or if it will not turn on. If your dryer does not heat, first check for a blown thermal fuse on the blower housing before replacing the heating element. In most cases, the heating element will have a break in the element, making it defective. For this repair you will need a quarter inch nut driver and a pair of needle nose pliers. Start this repair by disconnecting the power and then remove the dryer vent. This repair is done from the back of the appliance with the back panel removed. With the panel removed, this will give you access to the heater element. Your next step is to remove the high-limit thermostat from the housing and remove the two wires from the heater terminals. Now remove the screws securing the element to the housing and slide the element out. Installation of the new part is done in the reverse order.
Fixes these symptoms
  • Heat stays on after drum has stopped
  • No heat or not enough heat
  • Shuts off too soon
  • See more...
$80.26
In Stock
Dryer Heating Element
★★★★★
★★★★★
(3)
Fix Number FIX11741416
Manufacturer Part Number WP3387747
This is a genuine heating element assembly for your dryer. It is designed for older electric model clothes dryers and has 5/6-inch terminals. The heating element glows red when initiated and generates the heat for the dryer. It is located inside the heater housing inside the dryer. General deterioration on the heater coil will eventually cause the coil to break and the element to fail. When this part is faulty, it can prevent it from producing heat. The coil can also break and short causing it to continue heating even when turned off, which can be a fire hazard.
Fixes these symptoms
  • No heat or not enough heat
  • Takes too long to dry
  • Too hot
  • See more...
$125.01
In Stock
Dryer Heater Element
★★★★★
★★★★★
(2)
Fix Number FIX11746337
Manufacturer Part Number WP8544771
If your dryer is no longer heating up, there may be an issue with the heater element. You are able to test this part with a multimeter to determine if it has failed. If you need to replace the heater element, this is a genuine OEM part. The element has a coiled wire made of a nickel and chrome alloy. The wire heats up due to resisting an electric current, and the heat it produces is then used to dry your laundry. Before beginning this repair, be sure to disconnect the power supply to your dryer, and ensure you have room to access the back panel of the dryer. You will need to disassemble much of your dryer, including removing the drum, in order to access the heater element. The heater housing is found on the bottom right-hand side of your dryer.
Fixes these symptoms
  • No heat or not enough heat
  • Takes too long to dry
  • Too hot
  • See more...
$101.16
In Stock
Heating Element Assembly
Fix Number FIX418120
Manufacturer Part Number 131553900
This dryer heating and housing assembly has terminals at four o'clock. This E-line assembly comes with a felt strip and insulators already attached.
Fixes these symptoms
  • No heat or not enough heat
  • Noisy
  • Shuts off too soon
  • See more...
$200.92
In Stock
Dryer Heater Element
★★★★★
★★★★★
(1)
Fix Number FIX2349309
Manufacturer Part Number 134792700
This 3-coil 5500 watts heating element with housing is used to produce heat to dry the clothes in your dryer. The heating element is strung with a coiled wired. The wire receives, but resists a controlled electric current causing the wire to heat up to dry your clothes. If there is no heat or it is taking too long to dry, you may need to replace the heating element. Check for a blown thermal fuse or thermal cut off. This is a genuine OEM part. Please remember to disconnect the power to the dryer before starting the repair.
Fixes these symptoms
  • No heat or not enough heat
  • Shuts off too soon
  • Takes too long to dry
  • See more...
$11.88
In Stock
Heating Element Connection Wire Kit
Fix Number FIX334206
Manufacturer Part Number 279457
This kit is used for electric clothes dryers, and it comes with a yellow wire nut.
Fixes these symptoms
  • No heat or not enough heat
  • Takes too long to dry
  • See more...
$151.51
In Stock
Heating Element - 5300W
Fix Number FIX4205218
Manufacturer Part Number DC47-00019A
Includes the insulators and restring already attached. This dryer heating element produces heat to dry clothes in a dryer and is located in the rear end. If the heater element is burned, dryer does not heat or over heats, or clothes take too long to dry, then replacing this part could solve your problem. The tools needed for this repair project are: Phillips screwdriver, putty knife, needle nose pliers. To repair, first remove the main top of dryer and remove ground strap at the rear. Next, disconnect two wire harnesses that hold front panel to the cabinet to pull out front panel. Once you have access to the inside of the dryer, refer to the manual for further installation instruction. As a safety precaution, remember to unplug appliance from power source before beginning this repair project.
Fixes these symptoms
$60.13
In Stock
Heating Element
Fix Number FIX11742505
Manufacturer Part Number WP4391960
This heating element is a genuine OEM replacement part for your electric dryer. This element carries 5200W and 240V. A controlled electrical current passes through the coils, and the heat that is produced is then used to dry your laundry. If your dryer is running but not producing heat, there may be an issue with the element. Before beginning this repair, please be sure to disconnect the power supply to your dryer. You will need to pull the dryer out far enough to easily access the back panel in order to complete this repair. Please note that they part does not include the two terminals and two adapter leads, these parts must be purchased separately.
Fixes these symptoms
  • No heat or not enough heat
  • Takes too long to dry
  • See more...
$43.25
In Stock
Liquid Propane Conversion Kit
★★★★★
★★★★★
(1)
Fix Number FIX8691743
Manufacturer Part Number W10606694A
Converts natural gas burners to liquid propane.
Heating Element Assembly
Fix Number FIX3527791
Manufacturer Part Number 5301EL1001J
They are all strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used to dry the clothes in your dryer

Related Parts