Kenmore Dryer Wheels and Rollers
Start With Your Model Number
Find Parts Fast
Guaranteed Fit
Repair Videos
Need help finding your model number?
Popular Kenmore Dryer Wheels and Rollers
$37.48
In Stock
Maintenance Kit
Fix Number FIX373087
Manufacturer Part Number 4392065
This is an authentic drum support roller kit for 29-inch-wide dryers. It includes 1 belt, 2 roller wheels and an idler pulley. The parts in this kit allow the dryer to tumble properly by supporting the drum cylinder. The idler pulley provides the tension needed for a multi-ribbed belt. The belt attaches to the drum, idler pulley, and motor pulley. If these parts are damaged, it could cause loud noises such as squeaking and squealing while the drum is turning. These are normal wear parts and are best replaced as a kit to ensure optimal performance.
Fixes these symptoms
- Drum Not Spinning
- Marks left on clothes
- Noisy
- See more...
$22.69
In Stock
Dryer Drum Support Roller
Fix Number FIX11752609
Manufacturer Part Number WPW10314173
This drum support roller kit contains the parts needed to replace one roller on your dryer and is an OEM approved replacement part. This kit includes one drum roller and two bearings. Tri-rings are sold separately. The drum support roller holds the drum in position while it spins on the support wheels. Most dryers use two drum rollers, and it is recommended to change both at once to ensure proper drum rotation and even wear. A common symptom of a worn drum support roller is an unusually noisy dryer. This repair has been rated by customers as medium difficulty, and generally takes 30-60 minutes to complete. For your safety, you must disconnect the power, gas, and vent lines before you begin. For this repair you may need a nut driver, pliers, a screwdriver, and a wrench.
Fixes these symptoms
- Marks left on clothes
- Noisy
- See more...
$26.95
In Stock
Idler Pulley
Fix Number FIX334244
Manufacturer Part Number 279640
Often referred to as a dryer belt tension pulley wheel, this idler pulley is an OEM approved replacement part for a variety of dryer models. The idler pulley puts tension on the drive belt, and if the idler pulley fails to put the proper amount of tension on the belt, the dryer will not spin. It is located on the dryer drum, around the tension pulley. If your appliance is noisy during operation, will not tumble, or will not start, you may need to replace this part. It is made of durable plastic and has a diameter of roughly 2-inches. This part also includes the hardware needed for replacement. Most of our customers found this repair to be medium difficulty, and required a Philips screwdriver, 1/4-inch nut driver, putty knife, small flat blade screwdriver, and needle nose pliers to get the job done.
Fixes these symptoms
- Noisy
- See more...
$14.37
In Stock
Rear Drum Support Roller Kit
Fix Number FIX347627
Manufacturer Part Number 349241T
This is a rear drum support roller kit for your dryer. The 2 rollers come with 4 tri-rings, and 1 palnut. We recommend that you replace both rollers at once. This kit stabilizes the drum cylinder, while letting the drum rotate on the support rollers. If you are having problems with your appliance during tumble mode, or if it is too noisy, you will need this kit. To complete this repair you will need a putty knife, Philips screwdriver and a 5/16 nut driver.
Fixes these symptoms
- Drum Not Spinning
- Marks left on clothes
- Noisy
- See more...
$34.79
In Stock
Idler Pulley Wheel
Fix Number FIX265721
Manufacturer Part Number WE12X83
A dryer's idler pulley wheel serves to help the belt to rotate the drum.
Fixes these symptoms
- Noisy
- See more...
$116.35
In Stock
Blower Housing with Blower Wheel
Fix Number FIX418726
Manufacturer Part Number 131775600
***Please Note: This part is a substituted part by the manufacturer. It may appear different, but should still work with your appliance.
Fixes these symptoms
- Noisy
- See more...
$49.52
In Stock
Drum Support Shaft - Rear Shaft with Right Hand Threads
Fix Number FIX11753708
Manufacturer Part Number WPW10359272
Shaft for dryer drum support roller. Rear shaft with left hand threads. Part is updated so nuts may need to be replaced as well on older dryers.
Fixes these symptoms
- Noisy
- See more...
$60.52
In Stock
Drum Roller Shaft - Left Side
Fix Number FIX11753706
Manufacturer Part Number WPW10359270
Replace the shaft of your left side drum support roller with this part from Whirlpool/Kenmore. This replacement shaft is 2-7/8 inches long. It is meant for use with many of Whirlpool/Kenmore's gas and electric clothes dryers that have been manufactured since 1965. Also known as Drum Roller Shaft.
Fixes these symptoms
- Noisy
- See more...
$55.40
In Stock
Drum Support Roller Shaft - Right Hand Threads
Fix Number FIX11753707
Manufacturer Part Number WPW10359271
This shaft is for the front with right hand thread. Sold individually.
Fixes these symptoms
- Noisy
- See more...
$58.52
In Stock
Drum Support Roller Shaft - Right Side
Fix Number FIX11753705
Manufacturer Part Number WPW10359269
Replace the shaft of your right side drum support roller with this part. This replacement shaft is 3-3/16 inches long, but does not require a washer or a nut.
Fixes these symptoms
- Noisy
- See more...
Related Parts
- All Kenmore Dryer Parts
- Kenmore Dryer Belts
- Kenmore Dryer Brackets and Flanges
- Kenmore Dryer Caps and Lids
- Kenmore Dryer Circuit Boards and Touch Pads
- Kenmore Dryer Doors
- Kenmore Dryer Drums and Tubs
- Kenmore Dryer Ducts and Vents
- Kenmore Dryer Elements and Burners
- Kenmore Dryer Fans and Blowers
- Kenmore Dryer Filters
- Kenmore Dryer Fuses
- Kenmore Dryer Handles
- Kenmore Dryer Hardware
- Kenmore Dryer Hinges
- Kenmore Dryer Hoses and Tubes
- Kenmore Dryer Knobs
- Kenmore Dryer Latches
- Kenmore Dryer Lights and Bulbs
- Kenmore Dryer Panels
- Kenmore Dryer Pulleys
- Kenmore Dryer Seals and Gaskets
- Kenmore Dryer Sensors
- Kenmore Dryer Springs and Shock Absorbers
- Kenmore Dryer Switches
- Kenmore Dryer Thermostats
- Kenmore Dryer Timers
- Kenmore Dryer Valves
- Kenmore Dryer Wire Plugs and Connectors