Poulan Chainsaw Starters

Poulan Appliance Parts

Popular Poulan Chainsaw Starters

EPS STARTER KIT
$13.15
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX18528849
Manufacturer Part Number
576744401
This is a manufacturer-approved starter pulley kit. The starter kit is for rebuilding the chainsaw starter. This kit includes the starter pulley, assist spring, starter hub, and screws. Please be aware that this kit does NOT include the rope and rewind spring. This kit is most commonly needed when the starter hub is worn and the teeth have started to wear off, making it so the pawls are not catching on the flywheel to start the engine. This kit will also be needed if the starter pulley is damaged.
Fixes these symptoms
  • Cannot pull starter cord out or engine will not turn over
  • See more...
★★★★★
★★★★★
1 Review
Fix Number
FIX9030463
Manufacturer Part Number
545008013
This authentic OEM sourced part is specially made for use with Poulan and Husqvarna chainsaws. The purpose of this spring is to retract the starter assembly, unfortunately, over time it may loose tension or get damaged eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of your model for the exact location and application of this hardware. Keep in mind it is made of durable metal and is sold individually. NOTE: Here is the link to our article on <u><a href="http://www.ereplacementparts.com/article/6299/How_to_Fix_the_Starter_on_a_Ryobi_Trimmer.html">How to Fix the Starter on a Ryobi Trimmer </u></a>
Fix Number
FIX9005221
Manufacturer Part Number
530071966
This is an OEM recoil starter repair kit for a gas chainsaw. This kit consists of a plastic pulley, hub, return spring, and two screws. If the saw is having trouble starting, replacing the recoil starter kit should fix the problem. The most common reason for installing this kit is to repair a worn starter hub. The teeth are susceptible to wear, in which case it can no longer catch the pawls on the flywheel to start the engine. This kit will also solve the problem of a damaged starter pulley. This kit is also used to retrofit a regular starter into one with a spring-assist feature. The spring-assist features makes pulling the starter rope much easier, as it counteracts some of the resistance of the engine compression. For this repair you will need a screwdriver, torx drivers, long-nosed pliers, and wire cutters.
Rope Kit
$7.65
In Stock
Fix Number
FIX9008182
Manufacturer Part Number
530069232
This is a 3ft rope for a variety of power tools, most commonly chainsaws. It twists around the pulley of the recoil starter, which will allow you to pull-start the engine. This part is made of a durable nylon, but over time may wear out and snap. When that happens, you will need to replace it. Take note the plastic grip is sold separately.
Dog
$6.95
Special Order
Fix Number
FIX16352409
Manufacturer Part Number
530027162
This is an original part from Craftsman for edgers and chainsaws. This part helps turn the flying wheel when you pull on the starter rope. You may need a wrench set to replace this part. It is recommended to review your models diagram to verify the parts compatibility. This part is made of durable plastic and sold individually.
Spring
$6.95
In Stock
Fix Number
FIX9005956
Manufacturer Part Number
530021180
This replacement part is sourced from the original equipment manufacturer. It is specially designed for use with Poulan, Husqvarna and Jonsered chainsaws. The spring is an important component of the starter mechanism. It applies tension on the pulley allowing it to retract. Unfortunately, over time it may wear out, get damaged or lost eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. This high-quality spring is made of durable metal and is sold individually. You will need a screwdriver to take apart the starter housing in order to perform this repair.
Spring
$9.95
Special Order
Fix Number
FIX9289230
Manufacturer Part Number
545008015
This is a genuine OEM approved starter spring which is specially designed for use with handheld lawn and garden equipment. It is an identical replacement for a missing or a faulty component that was installed on a new unit. The purpose of this spring is to retract the starter assembly on the engine, so it engages the drive cup on the flywheel to start the engine when pulled. This high-quality spring is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams of your model for the correct location and application of this item.
Pulley
$10.95
In Stock
Fix Number
FIX9004620
Manufacturer Part Number
530057890
This is a genuine manufacturer approved replacement starter pulley. It is specially designed for use with gas powered chainsaws. This recoil starter pulley is made out of plastic and it is sold individually. Please note, housing, spring, rope, starter grip and screws are all sold separately. To complete this repair you will need a screwdriver. • Remove the starter housing screws • Separate the housing • Remove old pulley • Secure the new one in place • Reassemble and test the saw
Kit Rope 40"
$6.95
In Stock
Fix Number
FIX16352781
Manufacturer Part Number
530069919
This rope is a key component of a recoil starter assembly, when the rope is pulled to start the engine, it is returned back into the starter pulley by means of the starter spring. It is a durable nylon starter rope that is sourced directly from original equipment manufacturer for Poulan chainsaws. This high quality 40" rope is sold individually, please note the handle grip and other parts are all sold separately.
STARTER HUB
$10.95
In Stock
Fix Number
FIX18527202
Manufacturer Part Number
545178201
This is an authentic OEM part from Craftsman for use with Chainsaws. The recoil starter hub spins the flywheel to start the engine when you pull the starter rope. The most common reasons for replacing the starter hub is if the engine won't turn over when starter rope is pulled, the starter rope pulls (too) easily (and without resistance the starter hub is not engaging the flywheel or the Starter hub is not turning with the pulley (when the starter rope is pulled). This part is sold individually. Here is a list of tools that are needed to replace the starter hub Phillip's screwdriver, Torx drivers, long-nosed pliers, and scissors or wire cutters (optional).

Related Poulan Chainsaw Parts