Poulan Chainsaw Hardware

★★★★★

★★★★★

2 Reviews

Fix Number

FIX12636951

Manufacturer Part Number

530071945

This is a washer kit for a chainsaw. This kit includes the retaining washer, C-ring, and the washer that is located between the clutch and clutch drum assembly. The outer washer acts like a shoulder to keep the chain on the sprocket as well as helps secure the clutch drum to the saw. Due to its consistent contact with the chain, the outer washer is known to deteriorate over time. If the chain is regularly run with minimal tension, this will actually speed up the deterioration and cause the chain to move from side-to-side. The retainer C-clip should be replaced any time it has been removed. For this repair you will need to remove the side cover, the chain, and the bar.

Fix Number

FIX8990057

Manufacturer Part Number

503220001

Fix Number

FIX9004113

Manufacturer Part Number

530015917

It is a genuine item that is supplied by the original equipment manufacturer for use with Craftsman chainsaws. This is the special nut that helps to secure the bar. It provides an identical replacement for a missing or a faulty hardware that was installed on a new unit. Please make sure to check the appropriate diagrams of your model for the exact location and application of this part. Keep in mind this high-quality bar nut is made of durable metal and is sold individually.

Fix Number

FIX9007262

Manufacturer Part Number

530038593

This authentic component is an OEM part which is designed for use with Poulan chainsaws. It is an important component of the bar adjustment mechanism which helps to secure the screw. This is an identical replacement for a damaged or a faulty hardware that was installed on a new unit. Keep in mind this high-quality retainer is made of durable metal and is sold as an individual component. Check the appropriate diagrams for your model for the exact location and the correct installation of this part. You will need a screwdriver and a wrench set to take the housing apart and replace this retainer.

Fix Number

FIX9098828

Manufacturer Part Number

725536855

This replacement hardware is an authentic OEM sourced item, it is not an aftermarket imitation. It is commonly utilized on Husqvarna and Poulan chainsaws. This screw has multiple applications depending on the equipment. Please make sure to check appropriate diagrams for correct location and use of this hardware. One hex socket head screw is included per order.

Fix Number

FIX9289242

Manufacturer Part Number

545060502

It is an authentic manufacturer-sourced part which is specially made for Poulan and Husqvarna chainsaws. The part is utilized on a chainsaw to to adjust the blade to the correct tension. A correctly adjusted chainsaw blade will last longer and cut better. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. Keep in mind this high-quality pin-bar adjust is made of durable metal and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. NOTE: Here is the link to our article on <u><a href="http://www.ereplacementparts.com/article/4100/How_to_Tighten_a_Chainsaw_Chain.html">How to Tighten a Chainsaw Chain </u></a>

Fix Number

FIX9003373

Manufacturer Part Number

530015826

This is an authentic replacement part manufactured for use with chain saws from Craftsman. This part helps adjust the tension on the bar, which loosens or tightens the chain. You may need a screw driver to replace this part. This adjustable bar pin is made of metal and sold individually.

Fix Number

FIX9003727

Manufacturer Part Number

530016101

This is an authentic replacement part supplied from Poulan. It is generally used with gas powered chainsaws. This nut in conjunction with a bolt (sold separately) helps to secure air filter and carburetor. Requires a wrench installing/removing this item. It is sold individually.

Fix Number

FIX9284973

Manufacturer Part Number

530015611

It is a genuine item that is supplied by the original manufacturer for use with Poulan and Weed Eater chainsaws. This washer-clutch is a special friction disk that helps to engage the clutch by ensuring a right fit between connected components. It provides an identical replacement for a damaged or a missing hardware that was installed on a new unit. Check the diagrams of your model for the exact location and the correct installation of this part. One durable metal washer-clutch is included. You may need a screwdriver and a wrench set to perform this repair.

Fix Number

FIX9003728

Manufacturer Part Number

530016110

This is an authentic item sourced from original manufacturer. If the chainsaw bar doesn't adjust when you turn the tension screw usually the tension gear/pin or the adjustment bolt is worn or damaged. This part is made out of metal and it is sold individually. You would need a phillips head screwdriver to remove or secure this screw.