Haier Parts

Haier Appliance Parts

Popular Haier Parts

Fix Number
FIX16217024
Manufacturer Part Number
WD12X26146
The roller helps the lower rack of your dishwasher to smoothly slide in and out of your appliance. A broken or worn roller wheel can make it clunky or difficult to get the rack in and out of the dishwasher, and the part should be replaced. The rollers are sold individually, however there are four in total in your dishwasher. You may want to replace all at the same time to ensure they have even wear. Replacing a broken roller is a simple job and may require the use of a flat blade screwdriver. Remove the entire lower rack from your dishwasher and place it on a suitable work surface. Release the tabs to open the cover on the roller assembly, using the screwdriver if necessary to pry them open. Pull the damaged wheel off the assembly and push the new one into place. Reattached the cover and place the rack back into the bottom of your dishwasher. The lower rack should now easily glide in and out. These rollers are genuine OEM parts that measure approximately 1.5 inches in diameter and are charcoal in color.
Burner Grate Foot
$16.35
In Stock
Fix Number
FIX11729077
Manufacturer Part Number
WB02X24790
This is a single burner grate foot for ranges. It is sourced directly from the manufacturer and designed to help prevent the burner grate from scraping the top. Before performing this repair give the surface time to cool off.
Light Bulb - 40W
$21.95
In Stock
Fix Number
FIX217532
Manufacturer Part Number
40A15
This 40-Watt light bulb is sold individually. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place.

Installation Instructions

Jeffrey from SEATTLE, WA
Bake element replacement
1. Turn of over power at the breaker.
2. Remove bake element cover. There's 2 quarter inch nuts.
3. Disconnect old element. For me there was not much play in the wires so when I disconnected the old element I lost the wire in the insulation. If this happened you can remove the central plate cover on the back of the oven and you can easily find the wires again.
4. Connect the replacement element.
5. Screw the bake element cover back in.
6. Turn power back on.
Read more...
GASKET TUB Stainless Steel
$31.20
Special Order
Fix Number
FIX11721490
Manufacturer Part Number
WD08X22095
This dishwasher tub gasket is a durable replacement designed to create a watertight seal between the tub and door, preventing leaks during wash cycles and protecting surrounding cabinetry from water damage. Made from flexible rubber, it fits securely into the tub’s channel to maintain efficient operation and consistent drying performance. Over time, a worn gasket can lead to puddles on the floor or poor drying results, signaling the need for replacement. Installing the new gasket is straightforward: remove the old seal from the channel, clean the area, and press the new gasket firmly into place. This component ensures reliable performance and helps extend the life of your dishwasher.
Fixes these symptoms
MID SPRAY ARM
$36.42
In Stock
Fix Number
FIX17137080
Manufacturer Part Number
WD22X33498
Fixes these symptoms
  • Leaking
  • Noisy
  • Not cleaning dishes properly
  • See more...
PRESSURE SENSOR ASM
$38.45
In Stock
Fix Number
FIX12741258
Manufacturer Part Number
WD21X25468
Fixes these symptoms
  • Leaking
  • Not draining
  • Will not fill with water
  • See more...
Door Latch
$51.95
In Stock
Fix Number
FIX6447681
Manufacturer Part Number
WD21X10490
If your dishwasher door will not close or latch, or the machine will not start, you may need to replace the door latch. This genuine OEM replacement latch is meant to keep your dishwasher door closed while the machine operates, and if your latch is faulty your appliance may not work as intended. This is an easy repair that just requires a Phillips screwdriver, but you will need to pull the dishwasher out from underneath your counter to access the part. Since there is an electrical component involved, be sure to disconnect the power supply before beginning your repair. At this time, you should also inspect the door strike for damage, and replace that part if necessary.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Will Not Start
  • See more...
★★★★★
★★★★★
1 Review
Fix Number
FIX12703061
Manufacturer Part Number
WD28X24469
This basket is part of a silverware basket that has 3 sections. This is the middle section of the basket.
Fixes these symptoms

Installation Instructions

Barbara from Eaton, CO
worn part
There was no repair. All I needed to do was replace the worn silverware basket with the new one. Read more...
LIGHT SWITCH
$36.42
In Stock
Fix Number
FIX16554876
Manufacturer Part Number
WR23X37285
The light switch in your refrigerator is used to turn the light on and off when the fridge door opens or closes. This is considered a closed switch, which means that when the fridge door depresses the button there is no continuity and the light turns off. When the fridge door opens and the button is released, there is continuity, and the light turns on. If the light in your fridge is not burned out but will not come on, the switch may need to be replaced. This genuine OEM replacement light switch is spring loaded and made of a white plastic. This is an easy repair that will require a flat blade screwdriver and a pair of needle nose pliers to complete the job. Since you will be working with electrical components, please be sure to disconnect the power supply to your fridge before beginning this repair.
Fixes these symptoms

Installation Instructions

Sheila from los angeles, CA
Door would not close after insatallation
Followed the video with no problems, but the door would not close. There is a rubber bumper that the light switch strikes, This bumper was not horizontal, and just had to be twisted to a horizontal position. The door then closed tightly, Total repair time was about 5 minutes! Read more...
LOWER SPRAY ARM
$30.95
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX17137081
Manufacturer Part Number
WD22X33499
Please be informed that this OEM-verified part that DOES NOT come with the heatshield, as per GE directly and are no longer required. This lower spray arm assembly in your dishwasher distributes water and detergent during the washing cycle by spinning around and spraying water in different directions. You can usually find it attached to a support or hub at the bottom of the dishwasher. If this part is broken, you might notice some signs. You might hear a knocking or banging sound coming from the dishwasher. The spray arm may not rotate properly or might seem wobbly. It is important to replace a damaged arm assembly as your dishes will not get cleaned properly, and they will still have dirt on them even after a wash cycle. It can also cause the dishwasher to have a bad smell because of leftover food residue. To remove your existing arm assembly, you will need to release its locking mechanism before lifting it out of your appliance.
Fixes these symptoms
  • Leaking
  • Noisy
  • Not cleaning dishes properly
  • See more...

Installation Instructions

Kevin from SUN CITY WEST, AZ
Rhythmic noise from bottom spray, arm, banging on heat element
Replace bottom spray arm assembly Read more...

Haier Appliance Types

Popular Haier Models