Maytag Washer Belts
Start With Your Model Number
Popular Maytag Washer Belts
Fix Number FIX2005284
Manufacturer Part Number 12112425Over time, the belts in your washer can either stretch out and sag, or become brittle and snap. When this happens, it can result in the belt losing its grip and will not be able to spin or drain the tub. If this happens, the belts will need to be replaced. This OEM belt kit includes the drive belt and the pump belt, which are both V-shaped, and made of black rubber. The pump belt is located between the motor and pump under the washer, and the drive belt is looped around the drive and motor pulley at the bottom of the machine. This repair is easiest to complete if the washer is placed on its back, and you will need to disconnect the power and water supply.
Fix Number FIX11747978
Manufacturer Part Number WPW10006384The drive belt works with the pulley in your washer in order to spin the tub. If you notice a burning rubber smell, your washer has become excessively noisy, or it will not spin, it could indicate an issue with the drive belt. Over time the belt can become worn and snap, or it can become loose and no longer provide the proper grip to spin. This is a genuine OEM part for your washer that is black in color and made of rubber.
Drive Belt - 51 inches long
Fix Number FIX11738882
Manufacturer Part Number WP21352320This is a V-style drive belt that measures approximately 51-inches long and 3/8-inches wide. This part connects the drive motor to the drive system in the washer to turn the basket. It is prone to wear with time and require replacement. Some common signs that the drive belt may be worn is if the motor continues to run, but the washer is not agitating, spinning, or draining. This part is sold individually and is OEM authorized.
Fix Number FIX11754067
Manufacturer Part Number WPW10388414This drive belt is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt get wear and tear. NOTE: Per Manufacture, belt measures 48.22" long uninstalled and the belt will stretch To 51.53" when installed.
Drive Belt and Motor Isolator Kit
Fix Number FIX2003327
Manufacturer Part Number 12001788This kit contains a flat drive belt, two motor isolators, and an instructions sheet. The drive belt is made to slip on the pulley until the basket gets up the desired speed.
V-Style Spin and Agitate Belt - 28-3/4 inches long
Fix Number FIX11740577
Manufacturer Part Number WP27001006This v-style spin and agitate belt is 28-3/4 inches long and half of an inch wide. It is all black in color and made entirely of rubber.
Fix Number FIX11740578
Manufacturer Part Number WP27001007This v-shaped spin belt helps transfer power from the motor to the transmission to help pump the water in and out of the washer. It also helps runs the spin cycle in the washer.