Maytag/Maytag_Thumb/59115.gif
See part 5 in the diagram
Replacing your Maytag Washer Drive Belt and Motor Isolator Kit play video
( Grid squares measure 1x1 inch )

Drive Belt and Motor Isolator Kit

$40.85
Fix Number: FIX2003327
Manufacturer #: 12001788
Manufactured by: Whirlpool

Product Description

This kit contains a flat drive belt, two motor isolators, and an instructions sheet. The drive belt is made to slip on the pulley until the basket gets up the desired speed.

Videos For installing this part.

Replacing your Drive Belt and Motor Isolator Kit

Replacing your Drive Belt and Motor Isolator Kit play video
Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.9 / 5.0, 7 reviews.
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    • Customer:
      Timothy from Monroe, GA
    • Parts Used:
      12001788
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Socket set
    Motor ceased working
    Parts (motor/motor controller board) arrived within two days of ordering. Instructions were extremely accurate. Machine was up and running within an hour of the start of the repair. Replacement parts were different than original; wiring harness on original was attached to the Motor Controller Board and plugged into the motor; reverse application with new parts. I had difficulty with the plug from the motor to the controller board as there was no specific plug to place it into as the other wires on the unit. This plug seated onto the end of the physical board. For a visually impaired individual; this was the most challenging aspect of the repair.
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Bruce from Pasadena, MD
    • Parts Used:
      22004465, 12001788
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      More than 2 hours
    • Tools:
      Nutdriver, Pliers, Screw drivers, Socket set
    Washing Maching Made lots of Squealing during spin Cycle
    I had some help. The instructions were pretty clear about diss-assembly. I had to hit the shaft out with a sledge hammer and a block of wood. the confusion came as two sets of bearing seals were provided.I finally figured out that on my unit I had to use the thicker one without the spacer. Putting it back together was laborious as the clips that held the front rubber seal on the tub were very difficult to put on. The belt that I ordered had the same part number as my belt but it was 2 inches too short so I had to use my original belt. It looked in good shape so I am not worried and it is easy to get to if I do have to replace it later on.
    2 of 3 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Keith from Parsons, KS
    • Parts Used:
      12001788
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers, Socket set
    Washer spin cycle would count down to 4 minutes then went back to 7 minutes with wet clothes
    I took the back off, took out the old belt. The bolt holding the drum pulley had worked loose so I tightened it before putting the new belt on. I replaced the motor rocker bushings according to the instructions before mounting the new belt. I ran it around several times by hand to stretch the belt and insure the belt wouldn't slip off before putting the cover on. Then I ran it through spin cycle and quick wash a couple of times to insure everything was ok.
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Tom from Bradley, ME
    • Parts Used:
      12001788
    • Difficulty Level:
      Very Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Nutdriver
    Drum drive belt slipping
    Removed four screws to remove the rear access panel, then rotated the drum while pulling the belt towards me to remove the belt from the drive motor and drum pulleys. Then reversed the procedure to install the new belt. It actually took longer to unhook/rehook the hoses and pull the machine out/back then it did to change the belt.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      James Stanley from Bedford, VA
    • Parts Used:
      12001788
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      1- 2 hours
    • Tools:
      Socket set, Wrench set
    the new belt was shorter than the old one.
    The bushing replacement was to difficult. the belt installation was a bear.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Duane from Sun Prairie, WI
    • Parts Used:
      12001788
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Screw drivers, Socket set
    worn out belt.
    watch repair video
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      duane from sun prairie, WI
    • Parts Used:
      12001788
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Screw drivers, Socket set
    worn out belt.
    watched repair video
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Model Compatibility
      This part works with the following models:
      Fix Number: FIX2003327
      Manufacturer Part Number: 12001788
      Brand
      Model Number
      Description
      Crosley
      CAH4205AWJ
      Washer - Residential
      Crosley
      CAH4205AWW
      Washer - Residential
      Maytag
      MAH14PDAAL
      Washer - Commercial
      Maytag
      MAH14PDAAQ
      Washer
      Maytag
      MAH14PDAAW
      Washer - Commercial
      Maytag
      MAH14PDABL
      Washer - Commercial
      Maytag
      MAH14PDABW
      Washer - Commercial
      Maytag
      MAH14PDAEW
      Washer
      Maytag
      MAH14PDAGW
      Washer
      Maytag
      MAH14PDBAW
      Washer
      Maytag
      MAH14PDBEW
      Washer
      Maytag
      MAH14PDBGW
      Washer
      Maytag
      MAH14PDCBQ
      Washer
      Maytag
      MAH14PDCBW
      Washer
      Maytag
      MAH14PDDWW
      Washer
      Maytag
      MAH14PDSAW
      Washer
      Maytag
      MAH14PNAEW
      Washer
      Maytag
      MAH14PNAGW
      Washer
      Maytag
      MAH14PNAWW
      Washer
      Maytag
      MAH14PNBAW
      Washer
      Maytag
      MAH14PNBEW
      Washer
      Maytag
      MAH14PNBGW
      Washer
      Maytag
      MAH14PNSAW
      Washer
      Maytag
      MAH14PRAWW
      Washer
      Maytag
      MAH14PSAAW
      Washer - Commercial
      Maytag
      MAH20PDA3W
      Washer
      Maytag
      MAH20PDAWQ
      Washer
      Maytag
      MAH20PDAWW
      Washer - Commercial
      Maytag
      MAH20PDCXQ
      Washer
      Maytag
      MAH20PDCXW
      Washer