Official Maytag Washer Hardware

Roller Support Tri-Ring

$11.98

Fix Number: FIX11755850
Manufacturer Part Number: WPW10512946

This small but mighty OEM piece is called a tri-ring and is used to support the drum roller shaft and the idler pulley shaft in your dryer. It helps to provide a tight seal between components by evenly distributing pressure. The part is triangular in shape, and less than an inch in size. Overtime it can become brittle or compressed, which can lead to a noisy tumbling cycle, or your dryer not tumbling at all. The tri-ring itself is simple to replace, simply slip off the damaged one and slip on the new. However, to access the drum roller or idler pulley, you will need to remove the front panel and drum of your dryer. This may require tools like a Phillips screwdriver, a quarter inch nut driver, putty knife, a small flat blade screwdriver, and a pair of needle nose pliers depending on your model. Ensure that the power is disconnected before beginning your repair.

Fixes these symptoms

Drum Not Spinning
Noisy
See more...

Watch the install video

Agitator Bolt

$6.51

Fix Number: FIX11741866
Manufacturer Part Number: WP358237

This bolt is a genuine OEM replacement part, used to secure the agitator in your washing machine. Overtime the bolt can become worn out due to the vibrations of the washer, and will need to be replaced. The size of the screw head is 7/16 inch, so you will need the appropriately sized socket to complete this repair. The new bolt comes with a rubber gasket and a threaded sealant.

Fixes these symptoms

Leaking
Marks left on clothes
Spinning Issues
See more...

Washer Washplate Screw

$7.60

Fix Number: FIX10064547
Manufacturer Part Number: W10752187

Fixes these symptoms

Spinning Issues
Will not agitate
See more...

Single Front Panel Cip

$16.35

Fix Number: FIX11731288
Manufacturer Part Number: W10854425

This part is the replacement single front panel clip for your dryer. It is made of metal and is approximately 2 inches long and ¾ inch wide. The front panel retainer clip is what holds the front panel on to the dryer. If the clip is damaged or missing, or if the front panel appears loose, you may need to replace the clip. This part is sold individually and is an authentic OEM part.

Fixes these symptoms